2. Shenzhen Itian Technology
  3. U8A
U8A

Shenzhen Itian Technology U8A User manual

  • Hello, I've reviewed the user manual for the U8A Wireless Charger. This charger is designed to charge various Apple Watch models using either a USB-C or USB-A connection. It utilizes magnetic adsorption for a secure connection during charging. I'm ready to assist you with any questions about this device or the contents of this manual.
  • What Apple Watch series are compatible with this charger?
    How do I start charging my Apple Watch?
    What should I do if the charger gets hot during charging?
User Manual
Fast Wireless Charger
U8A
Thank you for choosing our product. Please read the instructions carefully before using
Product information
Made for Apple Watch Series Ultra, 8,7,6 5,4,3,2 and 1
Features
Charge the Apple Watch using a USB-C or USB-A adapter
Magnetic adsorption holds the Apple Watch firmly in place while charging
Production instructions
1. Plug the Apple Watch wireless charger into any powered USB-C or USB-A adapter.
2. Place your Apple Watch face up on the wireless charging dock
3. Your Apple Watch will light up and automatically start charging
Wireless charging area
4. Remove your Apple Watch from the module when fully charged
Specifications
Size: 67*33*8.7mm
Weight: 18g
Material: ABS + Metal
Input: 5V/500mA 5V/1000mA
Output: 3W (Max)
Input interface: USB-C + USB-A
Compatibility: Apple Watch Series
Warning
1. Do not dismantle or modify the product
2. Do not store product in wet conditions
3. Do not let water inside part of the product’s interface, this would cause harm to the charger
4. While charging, the charger may heat up. This is normal and should not affect the charger’s
performance. If the charger feels hot to touch during the charging process, remove the
device from the charger and allow it to cool down before restarting the charging process.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
–Consult the dealer or an experienced radio/TV technician for help.
/