Julian Bowen LOI201 Assembly Instructions

Brand
Julian Bowen
Model
LOI201
Type
Assembly Instructions

This manual is also suitable for

Julian Bowen LOI201 is a stylish and comfortable button back chair that is perfect for any home. With its classic design and sturdy construction, this chair is built to last. The chair is easy to assemble and comes with all the necessary hardware. Simply follow the instructions in the manual and you'll have your new chair assembled in no time.

The Julian Bowen LOI201 is made from high-quality materials and is built to last. The frame is made from sturdy metal and the seat and back are upholstered in a durable fabric. The chair is also easy to clean, simply wipe it down with a damp cloth.

Julian Bowen LOI201 is a stylish and comfortable button back chair that is perfect for any home. With its classic design and sturdy construction, this chair is built to last. The chair is easy to assemble and comes with all the necessary hardware. Simply follow the instructions in the manual and you'll have your new chair assembled in no time.

The Julian Bowen LOI201 is made from high-quality materials and is built to last. The frame is made from sturdy metal and the seat and back are upholstered in a durable fabric. The chair is also easy to clean, simply wipe it down with a damp cloth.

Version 200711 LOI201
560mm
1060mm
Assembly Instructions
Button Back Chair
640mm
No Extra
Tools Required
Customer Service
03
HARDWARE
B
PARTS
FLAT WASHER
M8 x 22 MM = 8
A
M8 x 55 MM = 8
02
02
01
03
03
C
ALLEN KEY M8 = 1
Safety Advice
Please take the time to carefully read through the
whole of these instructions before you commence.
Keep these instructions for future reference.
Unpack, inspect and check off all of the contents.
Please dispose of all packaging safely.
Small component parts could choke a child if swallowed.
We strongly recommend that you keep children well away
from the work area.
It would be sensible to lay a sheet or blanket on the floor
where you intend to work to avoid scratching this product
and to protect your floor.
This product is heavy. Take extreme care when lifting to
avoid personal injury or damage to the product.
Assemble the product as close to its intended final position
in the room as possible.
HANDY HINT: If you keep the hardware in a bowl during
assembly you will be less likely to lose them.
04
We strongly urge that you do not use Power Tools, such
as drills or electric screwdrivers during this assembly as
this could cause irreparable damage to your product and
will invalidate the warranty.
1
05
B
A
C
B
A
C
Please do not fully tighten any
bolts until the final step.
02
03
2
01
3
4
06
IMPORTANT Carefully turn the chair upright and place on
a flat surface.Make adjustments to ensure that the chair frame
is straight and that the legs are even on the floor then
FULLY TIGHTEN ALL BOLTS assembled in previous steps
using Allen key (C).
General Care
Wipe clean with a slightly damp so cloth.
Avoid the use of all household cleaners and abrasives.
When moving your furniture, carefully li into place.
Never drag or push the pieces across the floor as this
will cause damage to the joints and could result in failure to
the product that will invalidate the warranty.
Recommendations
Periodical re-tightening of fixings.
Notes
We’ve tried to make this piece of furniture as easy to
assemble as possible.
In the unlikely event that you have problems puing
it together or have damaged or missing pieces,
please contact our customer services on 01623 727374
Julian Bowen Limited
Bentinck House, Park Lane Business Park, Kirkby-in-Ashfield, Nos, NG17 9LE
www.julian-bowen.co.uk 07
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Julian Bowen LOI201 Assembly Instructions

Brand
Julian Bowen
Model
LOI201
Type
Assembly Instructions
This manual is also suitable for

Julian Bowen LOI201 is a stylish and comfortable button back chair that is perfect for any home. With its classic design and sturdy construction, this chair is built to last. The chair is easy to assemble and comes with all the necessary hardware. Simply follow the instructions in the manual and you'll have your new chair assembled in no time.

The Julian Bowen LOI201 is made from high-quality materials and is built to last. The frame is made from sturdy metal and the seat and back are upholstered in a durable fabric. The chair is also easy to clean, simply wipe it down with a damp cloth.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents