2. Shark
  3. RV750_N

Shark RV750_N User manual

  • Hello! I've reviewed the user manual for the Shark N Series RV700 Robot Vacuum, focusing on its safe use around stairs using cliff sensors. The document highlights the importance of maintaining a 4 inch distance from stairs or using BotBoundary strips. Let me know if you have questions about this device, its features or using it around stairs
  • What is the minimum distance required between rugs and stairs for the robot to work properly?
    What should I do if my rug is less than 4 inches from the stairs?
!
4-inch
Min.
For your robot’s cli sensors to work properly, all runners,
rugs, or carpets must be at least 4 inches from the top of
any stairs (or extend over the edge of the stairs.)
If a runner, rug, or carpet edge is less than 4 inches from
the stairs and can’t be moved, use a BotBoundary™ strip
to block o the stairs.
USING YOUR SHARK ION™ ROBOT NEAR STAIRS
©2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
BOTBOUNDARY and SHARK ION are trademarks of SharkNinja Operating LLC.
For SharkNinja U.S. Patent information, visit sharkninja.com/USPatents
RV700_NSeries_POPM_INSRT_CliSensor_MP_Mv1
PRINTED IN CHINA
/