Kmart 42571049 User manual

CAUTION:

TO BE ASSEMBLED ON A DRY, SOFT, SMOOTH AND CLEAN SURFACE. WIPE CLEAN WITH A DAMP CLOTH. DO NOT USE DETERGENT

OR CHEMICAL CLEANERS. AVOID DIRECT SUNLIGHT AND WATER. FOR INDOOR USE ONLY.

WARNING:

DO NOT STAND ON THE CHAIR. DO NOT USE THE CHAIR AS A STEP LADDER. DO NOT USE THE CHAIR UNLESS ALL BOLTS, SCREWS

AND KNOBS ARE FIRMLY SECURED. SUITABLE FOR ONE PERSON USE ONLY. ONLY USE ON EVEN SURFACE. MAXIMUM SEAT SAFE

LOAD WEIGHT: 100KG

ASSEMBLY INSTRUCTIONS

1 PC 1 PC 1 PC 1 PC

1 PC1 PC1 PC 1 PC

1 PC1 PC1 PC1 PC

Assembly parts

1 PC

Step 1: Insert the part A1 & A2 (process step from to ) into corresponding X-type

iron parts.

Step 2: Insert the part B1 & B2 (process step from to ) into corresponding X-type

iron parts, then connect with part of step 1.

Step 3: Insert the part C1 & C2 (process step from to ) into corresponding X-type

iron parts, then connect with part of step 2.

Step 4: Insert the part D1 & D2 (process step from t o ) in to corresponding X-type

iron parts, then connect with part of step 3.

Step 5: Connect the part A4 & B4 (process step from t o ) with corr esponding

X-type iron parts.

Step 6: Connect the part A3 & D4 (process step from to ) with corresponding

X-type iron parts.

Step 8: Connect the part C3 & D3 (process step to ) with corresponding X-type

iron parts.

Step 9: Put the PU seat on the frame and make sure the PU pocket on the back of

the seat is put into tube frame, then ﬁx the PU seat with the grip fasteners.

Caution: you must ﬁx

the PU seat on the metal

frame with the grip

fasteners before use.

Please note: When you connect part C4 & B3, must

connect process step 13 before connect process step

14 to avoid assembly unsmoothly.

Step 7: Connect the part C4 & B3 (process step from to ) with corresponding

X-type iron parts.

Please note: When you connect part C3 & D3, must

connect process step 15 before connect process step

16 to avoid assembly unsmoothly.