2. Avteq
  3. GC8-SM

Avteq GC8-SM Operating instructions

  • Hello! I've reviewed the user guide for the AVTEQ GC8-WMP touch panel mount. This document provides detailed instructions for mounting the panel using L brackets and screws. I am ready to help you with any questions you have about installing or using it. Please feel free to ask me.
  • What are the required cutout dimensions for the wall?
    How is the touch panel secured to the face plate?
    How can the wall box be secured to the wall?
Install Guide
GC8-WMP
800-285-8315 AVTEQ.net
1
2
A) Place the face plate face down on a table.
B) Put the touch panel on the face plate with the
bottom resting against the metal shelf.
E
Place the wall box over the back of the
face plate lining up the four holes on
the faceplate.
C)
800-285-8315 AVTEQ.net
3
4
Place L bracket into the top of the wall box. Use
the L bracket to secure the touch panel snuggly to
the front of the face plate and then secure in place
with 1/4-20 screws provided.
Remove the wall box with the L bracket
in place from the face plate. Place the
wall box in the wall. Secure with either
wall anchors on the front flanges or
directly to a stud.
Note: The cutout for the wall needs to
be 9.5" wide and 6" tall.
secure with wall anchors
secure to studs
800-285-8315 AVTEQ.net
5
Slide the face plate into the
wall box and secure with four
1/4-20 screws
/