Displays2go AVTCRD3V, AVTCRD2V, Credenza2-V Installation guide

Hello! I've reviewed the Credenza assembly manual. It outlines how to assemble and mount the credenza, including attaching the uprights and camera support. The manual also details the adjustment options for the uprights to accommodate diverse screen mount types. I am here to help with any questions you may have about setting up your product.
What is the purpose of the holes at the top and bottom of the uprights?

What hardware is used to mount the camera support?

Assistance: www.avteq.net

(214)905-9001

1151 Empire Central Dallas, TX 75247

PH(800) 285-8315 FAX(214) 905-9666

CREDENZA

ASSEMBLY MANUAL

Assistance: www.avteq.net

(214)905-9001

1151 Empire Central Dallas, TX 75247

PH(800) 285-8315 FAX(214) 905-9666

UPRIGTHS

ASSEMBLY

SCREW 516" × 34"

+ WASHER (×16)

These holes at the top and the bottom

are used to adjust the uprigths for different

screen mounts

Assistance: www.avteq.net

(214)905-9001

1151 Empire Central Dallas, TX 75247

PH(800) 285-8315 FAX(214) 905-9666

SLIDE THE CAMERA SUPPORT FROM ONE

SIDE OF THE WALL MOUNT BEFORE

PUTTING THE BRACKETS

MOUNTIGN THE CAMERA SUPPORT

FOR WALL MOUNT USE

SIDE VIEW

SCREW 516" × 1 14" +

2 WASHER + NUTS

(×4)