2. Luxor
  3. WGB3624M

Luxor WGB3624M, WGB4030M Installation guide

  • Hello! I've reviewed the Installation Guide for the Magnetic Glass Wallboard. This document provides step-by-step instructions for mounting the board, including how to use the template, attach the padded squares, and secure the brackets. I'm ready to answer any questions you have about the installation process.
  • What should I do before installation?
    What should I use if the template is damaged?
    Where should the padded squares be placed?
6
21
57
3 4
Length minus(-) 12 in
Height minus(-) 2½ in
A x4E x1 F x varies
depending on
the board size
B x4
M5
C x4 D x4
STUD
DRYWALL
1/8˝ Bit
NO STUD
1/4˝ Bit
DRYWALL
A
C
C
C
C
CD
D
E
E
E
E
F
Metal Back
DRYWALL
A
B
Level
Level
Mallet
LIGHTLY TAP
SECURE BRACKETS WITH
PHILLIPS HEAD DRILL BIT
Use included Template to mark drill
locations and padded square locations.
If template is damaged use tape measure.
Place padded squares
evenly around the metal
backing of the board.
BEFORE INSTALLATION
MEASURE THE BOARD:
Length= ______
Height= ______
USE PROVIDED TEMPLATE
FOR HOLE LOCATIONS
Pencil
Drill
1/8˝ + 1/4˝ Drill Bit +
Phillips Head Drill Bit
Magnetic Glass Wallboard
Installation Guide
07/24/15
Heavy Lifting:
Assistance
Required
/