Metra MPS-CHWP-1 Operating instructions

Metra
Brand
Metra
Model
MPS-CHWP-1
Category
Motorcycle Accessories
Type
Operating instructions
0
MPS-CHWP-1
Install instructions
MetraOnline.com
Date: 7/11/2022 REV.1
3' UTV Chasing RGB whip antenna
Visit metrapowersports.com to view the available installation parts
and ATV/UTV accessories.
KIT FEATURES
•Flexible Polycarbonate tube
•Quick connect base
•Heise Connectors
•5050 RGB Strips
•Controlled with RF Remote / Smart Device app
•1-year limited warranty
WHAT’S IN THE BOX
•Chasing RGB Whip antenna
•Pro RGB controller
•RF Remote
•Flag Hooks (2)
•Dust Cap
Having difficulties?
Contact our tech support line at:
Techsupport@metra-autosound.com
Or via phone at:
368.257.1187
TECH SUPPORT HOURS (EST)
Monday-Friday: 9:00AM – 7:00PM
Saturday: 10:00AM – 5:00PM
Sunday: 10:00AM – 4:00PM
Closed for most US Federal Holidays
MPS-CHWP-1
3' UTV Chasing RGB whip antenna | Install instructions
MetraOnline.com
Technical Support: 386-257-1187
Mounting the LED whip light antenna mast.
• Mounting base requires a ½” hole, insert into desired mounting location.
• Using the flat washer, locking washer and nut secure base to mount with a 19mm wrench.
Placing Flag on mast.
• Insert screw into clamp, placed in desired location on the mast. Place double ring on screw, closing
clamp around ring and tighten using supplied nut. Using carabiner insert into open end of the ring.
Attaching the mast to the base.
• Line up holes in base and mast, insert pin until spring is compressed. Rotate lock to secure, then release
pin.
Connecting HEISE controller.
• Connect the whip to the controller. Align the arrows to each other, and tighten the screw cap. Connect the
red wire to +12V accessory, and the black wire to chassis ground.
MPS-CHWP-1
MetraOnline.com
Technical Support: 386-257-1187
RED: 12VDC Accessory power
(10A fuse recommended)
Black: Ground
0
RGB Controller:
• Scan QR code to download HEISE Connect app.
• In the app set pixel count to 43
MPS-PRSP
2020-UP Polaris Ranger XP | Install instructions
MPS-CHWP-1
3' UTV Chasing RGB whip antenna | Install instructions
3
3
4
5
Screw
T25
MetraOnline.com
Technical Support: 386-257-1187
Step 9
Step 13
The controller has the option for turn signal and brake functions. By connecting the
following wires, the whip will flash amber with vehicle's turn signal, and illuminate red
when braking.
Green wire - Left turn signal (+12VDC)
Yellow wire - Right turn signal (+12VDC)
White wire - Brake light (+12VDC)
Power On
Speed Adjustment
Brightness Adjustment
Press and hold for 5 seconds to lock
controller to work only with this remote.
(app control will continue to function)
Demo Mode
Power Off
Change Mode
Single Color
Press and hold for 5 seconds to unlock
controller from remote.
(Allows controller to work with multiple remotes.)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Metra MPS-CHWP-1 Operating instructions

Metra
Brand
Metra
Model
MPS-CHWP-1
Category
Motorcycle Accessories
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents