2. Dometic
  3. Hold Down Brackets_960 Series SaniPottie Portable Toilet

Dometic Hold Down Brackets_960 Series SaniPottie Portable Toilet Installation guide

  • Hello! I've reviewed the installation instructions for the Dometic 960 series and SaniPottie 960 series hold-down brackets. I understand the steps for proper installation, including bracket placement, marking, and securing. I'm ready to answer your questions about this product.
  • What type of toilet is this bracket designed for?
    What is the first step of installation?
    What do you do after marking the bracket mounting holes?
Hold-Down Brackets
Installation Instructions
1. Set 960 series SaniPottie® portable toilet in
desired location, providing clearance for lid and
seat in "up" position, and clearance at the sides
to unlatch and remove top tank.
2. With side clasps unlatched, place hold-down
brackets (with mounting holes facing out) under
the lower tank and align with grooves (see
illustration).
3. Mark bracket mounting holes.
4. Remove toilet. Fasten brackets to floor or deck
with screws provided.
5. Set SaniPottie toilet between brackets and latch
in place.
600344398 08/16
Dometic Corporation
13128 State Rt 226
PO Box 38
Big Prairie, OH 44611
1-800-321-9886
© Dometic Corporation
/