80114-411 03.16
ELECTROSURGERY
QUICK GUIDE
VIO® 3
This quick guide is no substitute for briefing and user manual. This quick guide does not include any safety notes. Make yourself familiar
with the safety notes in the user manuals.
Necessary operating steps
If the red return electrode symbol lights up, check the following:
•Is the return electrode correctly connected to the device?
•
Does the long edge of the return electrode point to the operating field?
•Does the return electrode have sufficient contact to the skin?
1. Touch the instrument symbol.
2. Connect the instrument to the socket with flashing socket frame.
!
1Switch on the device
2Select program
3Apply and connect return electrode
The long edge of the neutral electrode (1) must point to the operat-
ing field.
4Monitor return electrode
Correct
Error
5Connecting the instrument
6Checking the instrument settings
7For APC applications, open argon bottle
© Erbe Elektromedizin GmbH Contacts worldwide: see erbe-med.com Hotline Germany: +49 7071 755 123
Optional operating steps
8Changing mode
9Changing effect
10 Assign footswitch, AUTO START, AUTO STOP
/
