Dethmers 6099-2 User manual

Brand
Dethmers
Model
6099-2
Type
User manual
4/16
HJ26099, Rev 1




,7(0
3$57
'(6&5,37,21
47<

187+(;1&&(17(5381&+

;*$0$&+,1(:$6+(5

%2/71&;*5+(;:657'
)/1*


3,1;::,5(&/,3

806/2&.3,1$66(0%/<5((6(

/2&.,1*7$%

/2&.,1*7$%

:$6+(56+,0,';7+.

'2'*(35(3)5$0(
 
'2'*(35(362&.(7
 
'2'*(35(362&.(7
'$7(
'$7(
7+6732%2;
%2<'(1,2:$
7+,5'$1*/(
352-(&7,21
81/(6627+(5:,6(
63(&,),('$//',0(16,216
$5(,1,1&+(6

'5$:1%<
$3329%<
'5$:,1*12
5(9
6&$/(
6+((72)
B
'2'*(35(35$,/6
72/(5$1&(6
; 
0,10$&+,1(685)$&(
;; %5($.$//6+$53('*(6
;;; %(1'$1''5$)7


:(,*+7

5(
5:

7+('5$:,1*$1'$//
,1)250$7,217+(5(
21$5(7+(3523(57<2)
'(0&2
'(6&5,37,21
6$9('%<
5:

'$7(
92/80(

6099 PARTS LIST
Please order replacement parts by PART NO. and DESCRIPTION.
REF. PART
NO. NO. QTY. DESCRIPTION
1. 00173 4 .5 NC Hex Nut Center Punch
2. 02384 4 .5 x 14GA Machine Washer
3. 14930 16 Bolt .375 NC x 1.00 GR5 Hex w/srtd flng
4. 11790 4 .25 x 2.00 Pin W/ Wire Clip
5. 14412-95 4 UMS Lock Pin
6. 14914-91 2 Locking Tab Large Gold
7. 14413-95 2 Locking Tab Small Silver
8. 14423 8 Washer Shim .875 ID x .030 THK
9. 14915-76 1 Main Frame
10. 14916-76 2 Locking Socket Driver Front Pass. Rear
11. 14929-76 2 Locking Socket Pass. Front Driver Rear
Dodge Prep Rails UL
DEMCO • 4010 320th St. • Boyden, IA 51234 • www.demco-products.com
PH: (712) 725-2311 • Toll Free: 1-800-543-3626 • FAX: (800) 845-6420
1. Remove covers from each mounting pod and place
main frame into box of truck over mounting pods as
shown.
2. Place front locking sockets (silver locking tabs) into
main frame and lock. Insert four 3/8” x 1.00” flanged
head bolts to each socket and leave loose. Reference
front drawing for direction of locking sockets.
4. Pull back on main frame towards back of truck and
snug bolts. Make sure sockets are free to operate and
main frame can be easily removed. Once this is done
torque all bolts to 35 ft-lbs. NOTE: Locking sockets
are in the locking position in picture. Once bolts are
checked once again make sure frame can be removed
and operate properly.
3. Place rear locking sockets (gold locking tabs) into
main frame and lock. Insert four 3/8” x 1.00” flanged
head bolts to each socket and leave loose. Reference
front drawing for direction of locking sockets.
IMPORTANT NOTE: Apply a little grease or lubricant to the part of the pins that insert into the mount-
ing pods to help maintain smooth operation and rotation of pins and to protect from the elements. Turn
the pins occasionally to prevent them from seizing. If handles turn to hard for desired fit remove nut
on bottom of handle and remove one shim from top bushing.
  • Page 1 1
  • Page 2 2

Dethmers 6099-2 User manual

Brand
Dethmers
Model
6099-2
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents