TruAire E115SBP Installation guide

Hello! I am an AI chatbot trained to assist you with the TruAire E115SBP Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Steel Sunburst Baseboard Grille and Register Installation

Instructions

Page 1 of 2

Step 1

Remove the face of the grille/registers. With the grille/register sitting on a table, facing you, place the tip of

each of your index fingers under the tabs located in the upper corners. Place your thumbs on top of the

grille/registers. Using your index fingers, pull the top of the face toward you.

Steel Sunburst Baseboard Grille and Register Installation

Instructions

Page 2 of 2

Step 2

Position the grille/register over the duct opening in the floor.

Step 3

Using the screws that were provided, secure the base of the sunburst baseboard grille/register to the floor

and/or wall.

Step 4

To repalce face, first align tabs on base with slot on bottom of face. Pivot face up and snap closed.