Palmer Instruments EDGL0/100# Specification

Brand
Palmer Instruments
Model
EDGL0/100#
Type
Specification

This manual is also suitable for

The Palmer Instruments EDGL0/100# digital pressure gauge offers precise measurements for a wide range of applications. With a measuring range of 0-100 PSI, it's ideal for measuring pressure in corrosive air or liquid systems. Its 1% accuracy ensures reliable readings, while the user-selectable resolution allows you to choose the level of detail that suits your needs.

The Palmer Instruments EDGL0/100# digital pressure gauge offers precise measurements for a wide range of applications. With a measuring range of 0-100 PSI, it's ideal for measuring pressure in corrosive air or liquid systems. Its 1% accuracy ensures reliable readings, while the user-selectable resolution allows you to choose the level of detail that suits your needs.

Specialty Gauges
Digital Gauges
Model EDG Digital Pressure Gauges
15
Continuous Innovation Since 1836
ISO 9001:2008 CERTIFIED
Register your product at www.palmerwahl.com/register
Specifications subject to change without notice.
(800) 421-2853 • FAX (828) 658-0728
PW1130
03/14
WARRANTY
Features
NEW! Palmer 2-1/2" EDG Series Digital Pressure
G
auges are easy to read and allow for greater user-
selectable configurations!
Applications
Leak Testing
Machine Oil Pressure
Municipal Water System
Pressure
Natural Gas Pipeline
Pressure
Plant Air Pressure
Water Tank Pressure
A great alternative to an analog gauge, the
new Palmer EDG Series Digital Gauge offers
1% accuracy in the range of Vacuum to 300
PSI for your applications.
PALMER PRESSURE GAUGES,
QUALITY YOU CAN TRUST!
Range Availability
Model # Clean Gas Type
EDGGV/0# Vacuum
EDGG0/15# 0 - 15 PSI Clean Gas
EDGG0/30# 0 - 30 PSI Clean Gas
EDGG0/60# 0 - 60 PSI Clean Gas
EDGG0/300# 0 - 300 PSI Clean Gas
Model # Corrosive or Liquid Type
EDGL0/100# 0 - 100 PSI Corrosive Air or Liquid
EDGL0/200# 0 - 200 PSI Corrosive Air or Liquid
• User-selectable:
- Resolutions: 0.1, 0.2, 0.5, and 1 whole unit.
- Engineering units for standard: PSI, Bar, kgf/cm2, kPa.
- Engineering units for vacuum: PSI, mBar, mmHg, inHg.
- Single point calibration with known pressure input.
Minimize errors at your expected operating pressure
for optimum accuracy.
- Modes to display constant applied pressure or peak and hold.
• Available in standard and compound ranges.
• Pressure reset/zero button.
• Protective Rubber Boot provides impact dampening and
IP54 compliance. IP40 without boot.
• Standard 9V battery; easy and inexpensive to replace.
• Battery conservation mode with auto-off timer, user-adjustable
from 5 to 180 seconds in 5-second intervals.
• Battery good for 8000 cycles (180 sec. per cycle with 300 sec.
intervals) or approximately 1500 hours. Reducing cycle time
will extend battery life.
• Upgraded internals for corrosive models to 316 SS, with 304
SS connection.
• Process connection: 1/4" NPT, Bottom Connected.
• Accuracy ±1% F.S. ±1 digit.
• Optional NIST Traceable Certificate of Conformance.
IP54
COMPLIANT
  • Page 1 1

Palmer Instruments EDGL0/100# Specification

Brand
Palmer Instruments
Model
EDGL0/100#
Type
Specification
This manual is also suitable for

The Palmer Instruments EDGL0/100# digital pressure gauge offers precise measurements for a wide range of applications. With a measuring range of 0-100 PSI, it's ideal for measuring pressure in corrosive air or liquid systems. Its 1% accuracy ensures reliable readings, while the user-selectable resolution allows you to choose the level of detail that suits your needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents