Fagor SVA Series linear encoders provide precise and reliable measurements for various industrial applications. With a resolution of 10 nm or 50 nm and accuracy up to ±3 µm or ±5 µm, these encoders deliver high-quality position feedback. They feature a compact design with a graduated glass pitch of 20 μm and a maximum speed of 3 m/s. The encoders are equipped with FeeDat protocol for absolute referencing and can determine their position without axis movement.
Fagor SVA Series linear encoders provide precise and reliable measurements for various industrial applications. With a resolution of 10 nm or 50 nm and accuracy up to ±3 µm or ±5 µm, these encoders deliver high-quality position feedback. They feature a compact design with a graduated glass pitch of 20 μm and a maximum speed of 3 m/s. The encoders are equipped with FeeDat protocol for absolute referencing and can determine their position without axis movement.
MANUAL CODE: 14460164
MANUAL VERSION: V1510
LINEAR ENCODER MODEL: SVAD
ENCODER LINEAL MODELO: SVAD
Fagor Automation
Page 2/11 - "SVAD" - V1510
Dimensions in mm
Dimensiones en mm
DISTANCE-CODED I0
INCREMENTAL I0
M5/M6x10
V1510 - "SVAD" - Page 3/11
MOUNTING POSSIBILITIES
POSIBILIDADES DE MONTAJE
MOUNTING PRECAUTIONS
PRECAUCIONES PARA EL MONTAJE
M5/M6x10
M5/M6x10
Page 4/11 - "SVAD" - V1510
PROCESO DE MONTAJE
MOUNTING PROCESS
- 1 - - 2 -
On unpainted surface
Sobre superficie sin pintura
- 3 -
M5/M6
V1510 - "SVAD" - Page 5/11
- 4 -
Washer / Arandela: AET 4.3
- 5 -
M4x20 DIN 912
Pa = 2.5 Nm
Allen SW 2, Pa = 1 Nm
M5x10 DIN 912, Pa= 5 Nm
M6, Pa= 8 Nm
Allen SW 2, Pa= 2 Nm
B5.3 DIN 125
Pa = Tightening torque / Par de apriete
Page 6/11 - "SVAD" - V1510
- 7 - - 8 -
- 6 -
After mounting it on the machine
Tras montarla en la máquina
V1510 - "SVAD" - Page 7/11
< 3 Nm
Option. Air intake on the endblock
Opción. Entrada de aire en la regla
Option. Air intake on the reader head
Opción. Entrada de aire en la cabeza
Quitar cierre / Remove lock screw: Allen SW 1.5
DIN ISO 8573-1
Class 1 - Particule Max. 0.1 µm
Class 4(7 bar) - Punto rocío / dewpoint 3ºC
Class 1 - Max. oil concentration 0.01 mg/m
3
· Unidades de filtro de aire recomendadas por FAGOR.
Modelos AI-400
AI-525 para 2 ejes,
AI-550 para 4 ejes,
AI-590 para 6 ejes.
· Air filters recommended by FAGOR.
Models: AI-400
AI-525 for 2 axes,
AI-550 for 4 axes,
AI-590 for 6 axes.
DIN ISO 8573-1
Class 1 - Particule Max. 0.1 µm
Class 4(7 bar) - Punto rocío / dewpoint 3ºC
Class 1 - Max. oil concentration 0.01 mg/m
3
· Unidades de filtro de aire recomendadas por FAGOR.
Modelos AI-400
AI-525 para 2 ejes,
AI-550 para 4 ejes,
AI-590 para 6 ejes.
· Air filters recommended by FAGOR.
Models: AI-400
AI-525 for 2 axes,
AI-550 for 4 axes,
AI-590 for 6 axes.
Pa = 1 Nm
Pa = 1 Nm
< 3 Nm
Pa = Tightening torque / Par de apriete
Pa = Tightening torque / Par de apriete
Page 8/11 - "SVAD" - V1510
Note / Nota:
For lengths over 9 meters, a 1 m or 3 m cable and an extension cable must be used whose characteristics are:
4 x 2 x 0.14 mm
2
+ 4 x 0.5 mm
2
Para longitudes superiores a 9 metros, se debe utilizar un cable de 1 m o 3 m y una alargadera cuyas
características sean: 4 x 2 x 0.14 mm
2
+ 4 x 0.5 mm
2
Absolute reference / Referencia absoluta:
The reference position between the reader head and the linear encoder is determined without having to move the
axis. The CNC can request the position of the linear encoder at any time.
La posición de referencia entre la cabeza lectora y el encoder lineal se determina sin tener que mover el eje. El
CNC puede solicitar la posición del encoder lineal en cualquier momento.
Absolute linear encoder with FeeDat protocol
Encoder lineal absoluto con protocolo FeeDat
Resolution
Resolución
A
ccurac
y
Precisión
Graduated
g
lass
p
itch
Vidrio
g
rabado de periodo
Maximum speed
Velocidad máxima
Maximum vibration
(
55 to 2000 Hz
)
Vibración máxima
(
55 a 2000 Hz
)
Shock
(
11 ms
)
Im
p
acto
(
11 ms
)
Movin
g
force
Fuerza de desplazamiento
Sealin
g
protection
Estanqueidad
Sealin
g
protection usin
g
an air inlet
Estan
q
ueidad con dis
p
ositivo de entrada de aire
Workin
g
temperature
Temperatura de traba
j
o
Stora
g
e temperature
Tem
p
eratura almacenamiento
Relative humidit
y
(
workin
g
or stora
g
e
)
Humedad relativa
(
traba
j
o o almacenamiento
)
Wei
g
ht
Peso
Power suppl
y
volta
g
e
Tensión de alimentación
Maximum
p
ower su
pp
l
y
current
Corriente de alimentación máxima
Maximum cable len
g
th
Lon
g
itud de cable máxima
Cable bendin
g
radius
Radio de curvatura del cable
250 mA
100 m
> 60 mm
MECHANICAL CHARACTERISTICS / CARACTERÍSTICAS MECÁNICAS
DC 5V ± 10%
0.25 kg + 0.5 kg/m
ELECTRICAL CHARACTERISTICS / CARACTERÍSTICAS ELÉCTRICAS
(DIN 40050)
0 °C .. 50 °C
(32 °F .. 122 °F)
-20 °C ..+70 °C
50 nm 10 nm
±3 µm / ±5 µm
20 μm
200 m/s² (10 g)
300 m/s² (30 g)
3 m/s
(-4 °F.. 158 °F)
20% ... 80%
< 4 N
IP53
IP64
SVAD50 SVAD10
V1510 - "SVAD" - Page 9/11
EC-PA-O :
Cable for direct connection to full-duplex or half-duplex FeeDat absolute systems.
Available in 1, 3, 6 and 9 meters.
Cable para conexión directa a sistemas absolutos FeeDat full duplex o half-duplex.
Disponible en 1, 3, 6 and 9 metros.
FeeDat: CONNECTIONS / CONEXIONES
SEÑAL
SIGNAL
DATA /DATA REQ /REQ +5V 0V Tierra / Ground
COLOR
Verde
Green
Amarillo
Yellow
Azul
Blue
Rojo
Red
Marrón + gris
Brown + grey
Blanco + Rosa
White + Pink
Malla
Shield
Page 10/11 - "SVAD" - V1510
Mondragón a 1 de octubre de 2015Mondragón October 1st 2015
The information described in this manual may be
subject to variations due to technical modifications.
FAGOR AUTOMATION, S. Coop. Ltda. reserves the
right to modify the contents of this manual without
prior notice.
* Term: 12 months from factory invoice date.
* It covers parts and labor at FAGOR AUTOMATION.
* Travel expenses are payable by the customer.
* Damages due to causes external to FAGOR
AUTOMATION, such as unauthorized manipulation,
blows, etc. are not covered.
WARRANTY
La información descrita en este manual puede estar
sujeta a variaciones motivadas por modificaciones
técnicas.
FAGOR AUTOMATION S. Coop. Ltda. se reserva el
derecho de modificar su contenido, no estando
obligada a notificar las variaciones.
* 12 meses desde fecha de expedición de fábrica.
* Cubre gastos de Materiales y Mano de Obra de repa-
ración en FAGOR AUTOMATION.
* Gastos de desplazamiento a cargo del cliente.
* No cubre averías por causas ajenas a FAGOR
AUTOMATION, como: golpes, manipulación por per-
sonal no autorizado, etc.
GARANTIA
DECLARATION OF CONFORMITY
Manufacturer: Fagor Automation, S. Coop.
Barrio de San Andrés s/n, C.P. 20500, Mondragón -
Guipúzcoa- (SPAIN)
We declare under our exclusive responsibility the
conformity of the product referred to in this manual.
Note. Some additional characters may follow the model
references indicated in this manual. They all comply with
the following regulations:
ELECTROMAGNETIC COMPATIBILITY:
EN 61000-6-2:2005 Standard on immunity in industrial
environments
EN 61000-6-4:2007 Standard on emission in industrial
environments
According to the European Directive:
2004/108/CE on electromagnetic compatibility.
DECLARACION DE CONFORMIDAD
Fabricante: Fagor Automation, S. Coop.
Barrio de San Andrés s/n, C.P. 20500, Mondragón -
Guipúzcoa- (ESPAÑA)
Declaramos bajo nuestra exclusiva responsabilidad la
conformidad del producto al que hace referencia este
manual
Nota. Algunos caracteres adicionales pueden seguir a
las referencias de los modelos indicados en este
manual. Todos ellos cumplen con las siguientes normas:
COMPATIBILIDAD ELECTROMAGNÉTICA:
EN 61000-6-2:2005 Norma de Inmunidad en entornos
industriales
EN 61000-6-4:2007 Norma de Emisión en entornos
industriales
De acuerdo con las disposiciones de la Directiva
Comunitaria:
2004/108/CE de Compatibilidad Electromagnética.
V1510 - "SVAD" - Page 11/11
USER NOTES NOTAS DE USUARIO
Fagor Automation S. Coop.
Bº San Andrés Nº19
Apdo Correos 144
20500 - Arrasate/Mondragón
- Spain -
Web: www.fagorautomation.com
Email: [email protected]
Tel.: (34) 943 719200
Fax: (34) 943 791712
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Fagor SVA Series Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Fagor SVA Series linear encoders provide precise and reliable measurements for various industrial applications. With a resolution of 10 nm or 50 nm and accuracy up to ±3 µm or ±5 µm, these encoders deliver high-quality position feedback. They feature a compact design with a graduated glass pitch of 20 μm and a maximum speed of 3 m/s. The encoders are equipped with FeeDat protocol for absolute referencing and can determine their position without axis movement.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Fagor CNC 8055 for milling machines Owner's manual
-
Fagor S2A-D90 series Owner's manual
-
Fagor GA Series Owner's manual
-
-
Fagor LA Series Owner's manual
-
-
Fagor EXA Owner's manual
-
-
-
