AND AD-1687-22 User manual

Type
User manual
AD-1687-22: Stand for the AD-1687
Instruction Manual
1WMPD4002604
x A cable clamp is provided on the right
side of the stand.
Use the clamp to hold cables in place.
x Using the two screws provided with the
stand, the stand can be secured to the
wall.
x After securing the stand to the wall, attach
the AD-1687 to the stand and adjust the
viewing angle.
S
tep1. Insert the bottom of the AD-1687 into
the lower part of the stand.
S
tep 2. Press the upper part of the AD-1687 so
that the AD-1687 fits securely into the
stand.
S
tep 1. Loosen the knob and adjust the angle of
the AD-1687 for appropriate viewing.
S
tep 2. After adjustment, fasten the knob.
3. Using the cable clamp
4. Securing the stand to the wall
1. Attaching the AD-1687 weighing
environment data logger to the stand
2. Adjusting the viewing angle of the
AD-1687
Step 2
Step 1
Knob
Cable clamp
Screws provided
1 / 1

AND AD-1687-22 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document