PLEASE RETAIN THIS INFORMATION FOR YOUR FUTURE REFERENCE

OPERATING INSTRUCTION:

 Insert 2 AA baeries (not included) into baery compartment on the back of unit.

 Slide switch to “ON” posion to light up LED. Slide switch to “OFF” posion to turn off.

 The “TRY-ME” is intended for in-store demonstraon only. Please remove “TRY-ME” wire and insert baeries into baery

compartment during normal operaon.

 Remove baery if product is le unused for a long me.

the compartment.

 Replace baery compartment door and hold door in place.

CAUTION:

 Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) baeries.

 Do not mix old and new baeries. Replace all baeries of a set at the same me.

 Clean the baery contacts and also those of the device prior to baery installaon.

 Ensure the baeries are installed correctly with regard to polarity (+ and -).

 Remove baeries from equipment which is not to be used for an extended period of me.

 Remove used baeries promptly.

Warning: Changes or modificaons to this unit not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rul

es. These limits are designed to provide reasonable protecon against harmful interference in a residenal installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons,

may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful

interference to radio or television recepon, which can be determined by turn

OFF

ON

DC 1.5V UM-3