Del Hutson Designs DHD2108nat User guide

Assembly and Installation

This shelf comes fully assembled and ready for installation. To install you will simply,

locate the pre-drilled holes on the upper back board of the shelf. Decide where you want

to install the shelf. Using a level, drill through the holes onto the wall and preferably into

studs (or using anchors). This will complete the installation and you can now enjoy and

decorate your shelf.

Use and Care

Use this shelf for displaying décor and storing toiletries. Capacity tested up to 15 lbs.

Best to apply a sealer to towel bar if keeping in a wet area or putting wet towels on it;

towel bar could rust. To clean wipe down with dry cloth.

Warranty

We will refund/exchange for damaged or defective items up to 30 days after date of

receipt. If you are unhappy with your purchase for any reason, we will work with you.

This manual is also suitable for

Download PDF