Canarm IVL472A02BN Operating instructions

Brand: Canarm

Model: IVL472A02BN

Type: Operating instructions

INSTALL EASY CONNECT MOUNTING BRACKET:

Electrical

Box

QUESTIONS OR CONCERNS CONTACT AT:

1-800-265-1833 (English) • 1-800-567-2513 (French)

Monday through Friday 8:00 AM to 5:00 PM E.S.T.

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF

LIGHT FIXTURE.

2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.

3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE

INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND

OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND

WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

Black (Live)

White

(Neutral)

Green (Ground)

Attach easy connect

mounting bracket

to electrical box with

electrical box screws

(not included).

Easy Connect

mounting

bracket

STEP 1

EASY CONNECT®

INSTALLATION INSTRUCTIONS

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS

READ ALL INSTRUCTIONS

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS

EW-1

01/18

STEP 4

STYLE#1- Tuck electrical wires into

outlet box and position fixture over

studs or nipple on mounting bracket

assembly. Secure fixture in place with

star washer(s) and cap nut(s).

Note: If required, assemble body and

spread the arms of the fixture out

evenly.

Star

Washer

Stud

Nipple

Cap

Nut

Fixture

STYLE#1

Glass

Spinner

Nut

Optional

Fixture

Socket

STYLE#1 - Remove spinner nut from

socket. Position glass on the fixture

and secure with spinner nut. Install

proper bulb type and wattage.

Note:

Glass may face up or down.

STYLE #2A

STYLE #2B

Finial

Shade

Bulb

Tube

Bulb

If your fixture has shades,

STYLE#2A - Remove spinner nut from

socket. Position shade on lamp and

secure with spinner nut. Place shade

on tube, then install bulb.

STYLE#2B - Install bulb, shade

then finial.

STEP 5 - Optional for some models (

Note: Refer to the style of assembly that matches the style of your fixture.)

Tel: (613) 342-5424, Fax: (800) 263-4598

STYLE #1

STYLE #2

Connect (push) electrical

wires from electric box

(house wiring) into correct

inserts. Black (Live),

White (Neutral),

Green (Ground)

Connect (push) electrical wires from fixture into correct inserts.

Black (live), White (neutral), Green (ground)

For multiple black (live) &

white (neutral) wires joined

in the electrical box

(house wiring), attach a single

“black” and “white” Jumper Wire

before connecting. Strip 7mm

from a 6” Jumper Wires (AWG 12-24)

supplied. Then connect (push) wires

into correct inserts.

STEP 2 - Option 1

Jumper Wire

Jumper

Wire

Option 2 - MULTIPLE ELECTRICAL BOX WIRES

STEP 3

CONNECT LIGHT FIXTURE

CONNECT HOUSE WIRES

Light

Fixture

(L)

Black

(Live)

(L)

Black

(Live)

(L)

Black (Live)

White

(Neutral)

White

(Neutral)

White

(Neutral)

Green

(Ground)

Green

(Ground)

Green

(Ground)

Fixture

Bracket

Screw

STYLE#2

STYLE #2 - Insert one screw into the

mounting bracket - do not tighten

yet. Tuck electrical wires into outlet

box and position fixture over the

mounting bracket. Line up the screw

in the bracket to the "7" hole on the

fixture. Slide fixture to secure in place.

Insert remaining screw. Tighten both

screws to secure.

NOTE: Product may not look exactly as shown in figures.

optional

Canarm IVL472A02BN Operating instructions

Canarm IVL472A02BN Operating instructions

Canarm IVL472A02BN Operating instructions

Related papers

Other documents