2. Rene
  3. R11-5001-AZR-R9-7001-ABR
R11-5001-AZR-R9-7001-ABR

Rene R11-5001-AZR-R9-7001-ABR Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Rene R11-5001-AZR-R9-7001-ABR Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
VESSEL SINKS
Installation Guide
872.241.0016
Toledo, Ohio
[email protected]
Renesinks.com
THE INSTALLATION
OF ANY VESSEL-STYLE SINK
Vessel sinks are designed to be mounted
upon the countertop. They are available in
porcelain, glass, bronze, and copper. For
models which have a rounded bottom, a
sink ring is typically installed below the
basin in order to stabilize it.
THE STEPS
• Measure and cut a hole in the countertop matching the diameter of the drain pipe.
*A larger hole may be required to accommodate a thicker sink bottom
• If the bowl has a curved bottom it will require a sink ring. Position the ring on the counter over
the drain hole, then rest the basin on the ring.
• If the bowl has a at bottom it can be rested directly on the counter without a sink ring.
• Install the drain.
872.241.0016
Toledo, Ohio
[email protected]
Renesinks.com
VESSEL SINKS
Installation Guide
ABOVE COUNTER
RECESSED
INTO COUNTER
/