Rene By Elkay R5-5021-R9-7007-ABR Installation guide

Type
Installation guide
VESSEL SINKS
Installation Guide
872.241.0016
Toledo, Ohio
renesinks.com
THE INSTALLATION
OF ANY VESSEL-STYLE SINK
Vessel sinks are designed to be mounted
upon the countertop. They are available in
porcelain, glass, bronze and copper. For
models which have a rounded bottom, a
sink ring is typically installed below the
basin in order to stabilize it.
THE STEPS
Above Counter Installation:
Measure and cut a hole in the countertop matching the diameter of the drain pipe.
If the bowl has a curved bottom, it will require a sink ring. Position the ring on the counter over
the drain hole, then rest the basin on the ring.
If the bowl has a at bottom, it can rest directly on top of the counter without a sink ring.
Install the drain.
872.241.0016
Toledo, Ohio
renesinks.com
VESSEL SINKS
Installation Guide
ABOVE COUNTER
RECESSED
INTO COUNTER
  • Page 1 1
  • Page 2 2

Rene By Elkay R5-5021-R9-7007-ABR Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI