Steel City FABSSADJ Specification

Brand: Steel City

Model: FABSSADJ

Type: Specification

This manual is also suitable for

Pre-Assemblies and

Pre-Fab Components

Effective November 2005

United States

Tel: 901.252.8000

Fax: 901.252.1354

Canada

Tel: 450.347.5318

Fax: 450.347.1976

Technical Services

Tel: 888.862.3289

www.tnb.com

171-SH2346-1458

Pre-Assemblies

Faster Installation for Increased

Profit Margin!

Paying to assemble outlet boxes, grounding pigtails,

device covers, and mounting brackets on the job

site can quickly become an expensive proposition.

Instead, choose Steel City Pre-Assemblies and

realize significant labor savings. This UL

Listed

product line includes 48 combinations of popular

boxes, brackets, and covers that speed installation

because the time-consuming assembly work is

already done for you.

Steel City Pre-Assemblies include:

• Outlet box with pre-installed grounding pigtail

• Your choice of cover options, including single-

and double-device covers, raised

⁄2",

⁄8", or

⁄4"

• Your choice of bracket options to allow mounting

to steel and wood stud or floor track, including

Steel City Box Support Covers, which combine

a bracket and cover in one component

• All UL Listed components

Steel City Pre-Assembly

Cat. No. 151-SV18-1458

Material Cost Each: $4.86

Labor Each: 0.07 hrs.

Labor Rate: $50/hr.*

Quantity: 200

Total Materials Cost: $972.00

Total Labor Cost: $700.00

Total M&L Cost: $1,672.00

Separately Purchased Components

Cat. Nos. 521511234EGB, 52C14-5/8, GSC-12, SSF-SV18

Material Cost Each: $3.18

Labor Each: 0.33 hrs.

Labor Rate: $50/hr.*

Quantity: 200

Total Materials Cost: $636.00

Total Labor Cost: $3,300.00

Total M&L Cost: $3,936.00

Example of Cost-Saving Potential with Steel City Pre-Assemblies

Save on Labor Costs...

Let Steel City

Do the Pre-Assembly Work for You!

To see how much you can save on your next project, use the Labor Savings Calculator Software for Steel City

Pre-Assemblies, available on CD

rom Thomas & Betts. Plug in your labor rate, your materials quantities, and your materials cost, and watch your savings add up!

* Labor costs are based on the NECA National Standards Publication.

otal Installed (M&L) Savings with Steel City Pre-Assembly =

$2,264.00 (57%)

Pre-Assemblies

Box with Pre-Installed

⁄2" Pigtail

• Popular 4" square boxes and switch boxes

• Pre-installed 10

⁄2" insulated grounding pigtails

• Save on labor costs by eliminating multiple

installation steps

521711234EP

Install box in desired location — DONE!

Purchase pre-stripped pigtail

Install pigtail and ground screw in box

Install box in desired location

Pre-Assembled Installation

Standard Installation

vs.

Box with Pre-Installed 10

⁄2" Pigtail

Cat. Box Type Pre-Installed Std. Pkg. UPC

Number Included Knockouts Pigtail Qty. Number

521511234EWP

52151234EW

Eccentric 10

⁄2" 50 78599102588

4"-sq. x 1

⁄2"D Welded Box

521511234P

521511234

⁄2" &

⁄4"10

⁄2" 50 78599102586

4"-sq. x 1

⁄2"D Drawn Box

521711234EP

521711234E

⁄2" &

⁄4" Eccentric 10

⁄2" 50 78599102587

4"-sq. x 2

⁄8"D Welded Box

52151XP

52151X

⁄2" &

⁄4" Eccentric 10

⁄2" 50 78599102724

4"-sq. x 1

⁄2"D Welded Box

52151CVNP

52151CVN

⁄2" &

⁄4" Eccentric 10

⁄2" 25 78599102728

4"-sq. x 1

⁄2"D Welded Box

LXWOWP

LXWOW-25

⁄2"10

⁄2" 25 78599102959

3"H x 2"W x 2

⁄2"D Gangable Switch Box

LXVP

LXV-25

⁄2"10

⁄2" 25 78599102692

3"H x 2"W x 2

⁄2"D Gangable Switch Box

CXWOWP

CXWOW

⁄2" &

⁄4"10

⁄2" 25 78599102694

3"H x 2"W x 3

⁄2"D Gangable Switch Box

CXWVP

CXWV

⁄2" &

⁄4"10

⁄2" 25 78599102696

3"H x 2"W x 3

⁄2"D Gangable Switch Box

CXP

⁄2" &

⁄4"10

⁄2" 25 78599102698

3"H x 2"W x 3

⁄2"D Gangable Switch Box

52171-CM14-5/8

mounted to stud

Box with Pre-Installed 10

⁄2" Pigtail and Box Support Cover

Cat. Box Type Box Pigtail Box Cover No. of Std. Pkg. UPC

Number Included Depth Included Included Raised Devices Qty. Number

52151-CM13 521511234EW 1

⁄2"10

⁄2" 52CM13

⁄2" 1 25 78599102712

52151-CM14-5/8 521511234EW 1

⁄2"10

⁄2" 52CM14-5/8

⁄8" 1 25 78599102714

52151-CM14 521511234EW 1

⁄2"10

⁄2" 52CM14

⁄4" 1 25 78599102716

52151-CMD17 521511234EW 1

⁄2"10

⁄2" 52CMD17

⁄2" 2 25 78599102718

52151-CMD18-5/8 521511234EW 1

⁄2"10

⁄2" 52CMD18-5/8

⁄8" 2 25 78599102720

52151-CMD18 521511234EW 1

⁄2"10

⁄2" 52CMD18

⁄4" 2 25 78599102722

52171-CM13 521711234E 2

⁄8"10

⁄2" 52CM13

⁄2" 1 25 78599102700

52171-CM14-5/8 521711234E 2

⁄8"10

⁄2" 52CM14-5/8

⁄8" 1 25 78599102702

52171-CM14 521711234E 2

⁄8"10

⁄2" 52CM14

⁄4" 1 25 78599102704

52171-CMD17 521711234E 2

⁄8"10

⁄2" 52CMD17

⁄2" 2 25 78599102706

52171-CMD18-5/8 521711234E 2

⁄8"10

⁄2" 52CMD18-5/8

⁄8" 2 25 78599102708

52171-CMD18 521711234E 2

⁄8"10

⁄2" 52CMD18

⁄4" 2 25 78599102710

Mount assembly to stud — DONE!

Pre-Assembled Installation

Standard Installation

vs.

Purchase pre-stripped pigtail

Install pigtail and ground screw in box

Mount box support cover to box

Mount assembly to stud

Box with Pre-Installed

⁄2" Pigtail and Box

Support Cover

• 4" square welded box, 1

⁄2" or 2

⁄8" deep

• Pre-installed 10

⁄2" insulated grounding pigtail

• Box support cover combines box-to-stud mounting

bracket with device cover

• One- or two-device box support cover, raised

⁄2",

⁄8", or

⁄4"

• Save on labor costs by eliminating multiple

installation steps

52171-CM14-5/8

Pre-Assemblies

Box with Pre-Installed

⁄2" Pigtail, Raised Cover,

and Box-to-Stud Bracket

• 4" square welded box, 1

⁄2" or 2

⁄8" deep

• Pre-installed 10

⁄2" insulated grounding pigtail

• One- or two-device cover, raised

⁄2",

⁄8", or

⁄4"

• SSF-SH2346 box-to-stud mounting bracket

• Save on labor costs by eliminating multiple

installation steps

171-SH2346-1458

Box with Pre-Installed 10

⁄2" Pigtail, Raised Cover, and Box-to-Stud Bracket

Cat. Box Type Box Pigtail Box Cover No. of Bracket Std. Pkg. UPC

Number Included Depth Included Included Raised Devices Included Qty. Number

151-SH2346-13 521511234EW 1

⁄2"10

⁄2" 52-C-13

⁄2" 1 SSF-SH2346 10 78599102611

151-SH2346-1458 521511234EW 1

⁄2"10

⁄2" 52-C-14-5/8

⁄8" 1 SSF-SH2346 10 78599102612

151-SH2346-14 521511234EW 1

⁄2"10

⁄2" 52-C-14

⁄4" 1 SSF-SH2346 10 78599102746

151-SH2346-17 521511234EW 1

⁄2"10

⁄2" 52-C-17-25

⁄2" 2 SSF-SH2346 10 78599102748

151-SH2346-1858 521511234EW 1

⁄2"10

⁄2" 52-C-18-5/8-25

⁄8" 2 SSF-SH2346 10 78599102810

151-SH2346-18 521511234EW 1

⁄2"10

⁄2" 52-C-18

⁄4" 2 SSF-SH2346 10 78599102614

171-SH2346-13 521711234E 2

⁄8"10

⁄2" 52-C-13

⁄2" 1 SSF-SH2346 10 78599102597

171-SH2346-1458 521711234E 2

⁄8"10

⁄2" 52-C-14-5/8

⁄8" 1 SSF-SH2346 10 78599102599

171-SH2346-14 521711234E 2

⁄8"10

⁄2" 52-C-14

⁄4" 1 SSF-SH2346 10 78599102598

171-SH2346-17 521711234E 2

⁄8"10

⁄2" 52-C-17-25

⁄2" 2 SSF-SH2346 10 78599102764

171-SH2346-1858 521711234E 2

⁄8"10

⁄2" 52-C-18-5/8-25

⁄8" 2 SSF-SH2346 10 78599102812

171-SH2346-18 521711234E 2

⁄8"10

⁄2" 52-C-18

⁄4" 2 SSF-SH2346 10 78599102766

Mount assembly to stud — DONE!

Pre-Assembled Installation

Standard Installation

vs.

Purchase pre-stripped pigtail

Install pigtail and ground screw in box

Insert box onto box support bracket

Install device cover to box support bracket

Mount assembly to stud

Pre-Assemblies

SSF-SH2346

151-SV12-1458

151-SV18-1458

Box with Pre-Installed

⁄2" Pigtail, Raised Cover,

and Vertical Mounting Bracket

• 4" square welded box, 1

⁄2" or 2

⁄8" deep

• Pre-installed 10

⁄2" insulated grounding pigtail

• One- or two-device cover, raised

⁄2",

⁄8", or

⁄4"

• 12" (SSF-SV12) or 18" (SSF-SV18) vertical

mounting bracket

• Save on labor costs by eliminating multiple

installation steps

Box with Pre-Installed 10

⁄2" Pigtail, Raised Cover, and Vertical Mounting Bracket

Cat. Box Type Box Pigtail Box Cover No. of Bracket Std. Pkg. UPC

Number Included Depth Included Included Raised Devices Included Qty. Number

151-SV12-13 521511234EW 1

⁄2"10

⁄2" 52-C-13

⁄2" 1 SSF-SV12 10 78599102601

151-SV12-1458 521511234EW 1

⁄2"10

⁄2" 52-C-14-5/8

⁄8" 1 SSF-SV12 10 78599102602

151-SV12-14 521511234EW 1

⁄2"10

⁄2" 52-C-14

⁄4" 1 SSF-SV12 10 78599102752

151-SV12-17 521511234EW 1

⁄2"10

⁄2" 52-C-17-25

⁄2" 2 SSF-SV12 10 78599102754

151-SV12-1858 521511234EW 1

⁄2"10

⁄2" 52-C-18-5/8-25

⁄8" 2 SSF-SV12 10 78599102756

151-SV12-18 521511234EW 1

⁄2"10

⁄2" 52-C-18

⁄4" 2 SSF-SV12 10 78599102604

171-SV12-13 521711234E 2

⁄8"10

⁄2" 52-C-13

⁄2" 1 SSF-SV12 10 78599102589

171-SV12-1458 521711234E 2

⁄8"10

⁄2" 52-C-14-5/8

⁄8" 1 SSF-SV12 10 78599102591

171-SV12-14 521711234E 2

⁄8"10

⁄2" 52-C-14

⁄4" 1 SSF-SV12 10 78599102590

171-SV12-17 521711234E 2

⁄8"10

⁄2" 52-C-17-25

⁄2" 2 SSF-SV12 10 78599102770

171-SV12-1858 521711234E 2

⁄8"10

⁄2" 52-C-18-5/8-25

⁄8" 2 SSF-SV12 10 78599102774

171-SV12-18 521711234E 2

⁄8"10

⁄2" 52-C-18

⁄4" 2 SSF-SV12 10 78599102772

151-SV18-13 521511234EW 1

⁄2"10

⁄2" 52-C-13

⁄2" 1 SSF-SV18 10 78599102606

151-SV18-1458 521511234EW 1

⁄2"10

⁄2" 52-C-14-5/8

⁄8" 1 SSF-SV18 10 78599102607

151-SV18-14 521511234EW 1

⁄2"10

⁄2" 52-C-14

⁄4" 1 SSF-SV18 10 78599102758

151-SV18-17 521511234EW 1

⁄2"10

⁄2" 52-C-17-25

⁄2" 2 SSF-SV18 10 78599102760

151-SV18-1858 521511234EW 1

⁄2"10

⁄2" 52-C-18-5/8-25

⁄8" 2 SSF-SV18 10 78599102762

151-SV18-18 521511234EW 1

⁄2"10

⁄2" 52-C-18

⁄4" 2 SSF-SV18 10 78599102609

171-SV18-13 521711234E 2

⁄8"10

⁄2" 52-C-13

⁄2" 1 SSF-SV18 10 78599102593

171-SV18-1458 521711234E 2

⁄8"10

⁄2" 52-C-14-5/8

⁄8" 1 SSF-SV18 10 78599102595

171-SV18-14 521711234E 2

⁄8"10

⁄2" 52-C-14

⁄4" 1 SSF-SV18 10 78599102594

171-SV18-17 521711234E 2

⁄8"10

⁄2" 52-C-17-25

⁄2" 2 SSF-SV18 10 78599102776

171-SV18-1858 521711234E 2

⁄8"10

⁄2" 52-C-18-5/8-25

⁄8" 2 SSF-SV18 10 78599102780

171-SV18-18 521711234E 2

⁄8"10

⁄2" 52-C-18

⁄4" 2 SSF-SV18 10 78599102778

Mount assembly to floor stud — DONE!

Pre-Assembled Installation

Standard Installation

vs.

Purchase pre-stripped pigtail

Install pigtail and ground screw in box

Insert box into vertical bracket

Insert device cover to vertical bracket

Mount assembly to floor stud

Pre-Assemblies

Pre-Fab Components

Easily Pre-Assembled Off-Site

for Faster Installation On-Site!

Rather than assembling box mounting brackets

and device covers on-site, keep an eye on profit

and use Steel City Pre-Fab Components to set up

jobs off-site for a quick and easy installation on-site.

They accommodate a wide variety of Steel City

covers, and they’re readily available for fast-track

projects.

• Ideal for use in hotels, casinos, hospitals, large

office buildings, and any other commercial or

institutional application where rough-in products

can be pre-fabricated to match floor plans for

quicker on-site installation

• Widely available from any supporting distributor

• Items readily available for fast-track projects

— no special lead time required

• All products are UL

approved and meet

applicable building codes

Increase Your Profit Margin by Reducing

Installation Time on the Jobsite!

Pre-Fab Components

Box with Pre-Installed

⁄2" Pigtail

• Popular 4" square boxes and switch boxes

• Pre-installed 10

⁄2" insulated grounding pigtails

• Save on labor costs by eliminating multiple

installation steps

521711234EP

Install box in desired location — DONE!

Purchase pre-stripped pigtail

Install pigtail and ground screw in box

Install box in desired location

Pre-Assembled Installation

Standard Installation

vs.

Box with Pre-Installed 10

⁄2" Pigtail

Cat. Box Type Pre-Installed Std. Pkg. UPC

Number Included Knockouts Pigtail Qty. Number

521511234EWP

52151234EW

Eccentric 10

⁄2" 50 78599102588

4"-sq. x 1

⁄2"D Welded Box

521511234P

521511234

⁄2" &

⁄4"10

⁄2" 50 78599102586

4"-sq. x 1

⁄2"D Drawn Box

521711234EP

521711234E

⁄2" &

⁄4" Eccentric 10

⁄2" 50 78599102587

4"-sq. x 2

⁄8"D Welded Box

52151XP

52151X

⁄2" &

⁄4" Eccentric 10

⁄2" 50 78599102724

4"-sq. x 1

⁄2"D Welded Box

52151CVNP

52151CVN

⁄2" &

⁄4" Eccentric 10

⁄2" 25 78599102728

4"-sq. x 1

⁄2"D Welded Box

LXWOWP

LXWOW-25

⁄2"10

⁄2" 25 78599102959

3"H x 2"W x 2

⁄2"D Gangable Switch Box

LXVP

LXV-25

⁄2"10

⁄2" 25 78599102692

3"H x 2"W x 2

⁄2"D Gangable Switch Box

CXWOWP

CXWOW

⁄2" &

⁄4"10

⁄2" 25 78599102694

3"H x 2"W x 3

⁄2"D Gangable Switch Box

CXWVP

CXWV

⁄2" &

⁄4"10

⁄2" 25 78599102696

3"H x 2"W x 3

⁄2"D Gangable Switch Box

CXP

⁄2" &

⁄4"10

⁄2" 25 78599102698

3"H x 2"W x 3

⁄2"D Gangable Switch Box

SBO16 and SBO24

Stud-to-Stud Horizontal

Mounting Brackets

•

Constructed of 24-gauge steel

• Pre-measured on center for 16" (SBO16)

or 24" (SBO24) stud spacing

• SBO16 accepts three 4" square or two 4

⁄16" boxes

(deep or shallow)

• SBO24 accepts five 4" square or four 4

⁄16"" boxes

(deep or shallow)

• Can be mounted at any height to meet individual

project requirements

• Versatile, open design enables mounting of box in

any location across horizontal plane between studs

• Device cover (mud ring) mounts to front of bracket

to set box in desired location

• Stamped rule on bracket with

⁄4",

⁄2", and 1" markings

Stud-to-Stud Horizontal Mounting Brackets

Cat. Std. Pkg. UPC

Number Description Qty. Number

SBO16 16" Stud-to-Stud Horizontal Mounting Bracket 25 78599103893

SBO24 24" Stud-to-Stud Horizontal Mounting Bracket 25 78599103895

SBO16

SBO16 mounted to

16" studs with one

4" square box installed

SBO24

SBO24 mounted to 24" studs with five

4" square boxes (full capacity) installed

SBO16 mounted to

16" studs with three

4" square boxes (full

capacity) installed

SBO24 mounted to 24" studs

with one 4" square box installed

Pre-Fab Components

SV1218 Floor-Track 12" and 18"

Vertical Mounting Bracket

•

Code-standard SV1218 bracket mounts to floor track

easily with screws through three pre-punched holes

in bottom plate (only two screws required for most

applications)

• Offers pre-measured box-mount locations at 12"

and 18" from floor — fast installation with no

measuring required

• Accepts 4" square or 4

⁄16" boxes (deep or shallow)

with standard device covers (mud rings)

• Supplied with horizontal cross-support bar for stability

after installation — prevents unit from falling into open

space between walls when sheetrock is applied

• Support bar sits in two slotted tabs on backside of vertical

bracket and mounts from stud to stud horizontally

• Support bar pre-measured for 24" stud cavities (score

lines provided for 16" stud cavities) with pre-punched

holes at stud locations for left or right stud installation

• Add optional SVX adapter plate to expand box capacity

• Optional SVX adapter plate installs to pre-punched

and tapped holes on sides of SV1218

• Up to two SVX plates can be added with 24" stud spacing

• One SVX plate can be added with 16" stud spacing

• SVX adapter plate accepts all device covers for 4"

and 4

⁄16" boxes

SV1218 mounted to floor

track and studs with one

4" square box installed

SVX

SVX with

box installed

SV1218 mounted to floor track

and studs with one 4" square box

installed and optional SVX adapter

plate with one box installed

Floor-Track 12" and 18" Vertical Mounting Bracket

Cat. Std. Pkg. UPC

Number Description Qty. Number

SV1218 Floor-Track Vertical Mounting Bracket with Supporting Horizontal Cross Bar 10 78599103896

SVX Adapter Plate for Expanded Capacity for SV1218 25 78599103897

SV1218

Pre-Fab Components

Box Support Covers

• Combines a box-to-stud mounting bracket

with a device cover in one easy-to-use product

• Designed for use with 4" square boxes

• Used with both steel and wood studs

• Cover raised

⁄2",

⁄8", or

⁄4"

• Designed for one or two devices

Box Support Covers

Cat. No. of Cu. In. Std. Pkg. UPC

Number Raised Devices Cap. Qty. Number

52CM13

⁄2" 1 3.0 25 78599102634

52CM14-5/8

⁄8" 1 4.0 25 78599102635

52CM14

⁄4" 1 5.0 25 78599102636

52CMD17

⁄2" 2 6.3 25 78599102637

52CMD18-5/8

⁄8" 2 7.3 25 78599102638

52CMD18

⁄4" 2 9.0 25 78599102639

52CM14-5/8

Box-to-Stud Mounting Brackets

Cat. Std. Pkg. UPC

Number Description Qty. Number

SSF-SH2346 Bracket for Mounting 4" or 4

⁄16" Box to 2

⁄2", 3

⁄2", 4", or 6" Stud 100 78599120731

SSF-SH4 Bracket for Mounting 4" or 4

⁄16" Box to 4" Stud 50 78599101491

SSF-SH6 Bracket for Mounting 4" or 4

⁄16" Box to 6" Stud 50 78599101492

Adjustable Box Brackets

Cat. Stud Box Std. Pkg. UPC

Number Description Spacing Depth Qty. Number

SSF-SG16A 16" Adjustable Box Bracket 11"–18" 1

⁄2" or 2

⁄8" 50 78599101489

SSF-SG24A 24" Adjustable Box Bracket 17"–26" 1

⁄2" or 2

⁄8" 50 78599101490

SSF-SG16A

52CM14-5/8

SSF-SH2346

Adjustable Box Brackets

• Designed for metal studs 16" or 24" on center

• Can also be adjusted for non-standard stud spacing

• Adjustable tabs accommodate 1

⁄2" or 2

⁄8" box depths

• Enables mounting of multiple boxes

• Installs easily — dimples provide a starting point

for screws

Box-to-Stud

Mounting Brackets

• Attaches 4" or 4

⁄16" electrical box to metal stud

• Support leg can be attached to stud to eliminate

movement of box in wall

• Attaches to metal or wood stud using self-tapping

screws and screw gun or nails

• Single model has capability to mount boxes on 2

⁄2",

⁄2", 4", and 6" stud, which means less inventory

Pre-Fab Components

Thomas & Betts Corporation

Electrical Division

8155 T&B Boulevard

Memphis, Tennessee 38125

Thomas & Betts Ltd.

700 Thomas Avenue

Iberville, Québec J2X 2M9

For U.S. Customer Service and Order Inquiries,

call 1-800-816-7809 or fax 1-800-816-7810.

For International Service and Order Inquiries,

call (U.S.) 901-252-5400 or fax 901-252-1330.

For Canadian Customer Service and Order Inquiries,

call 450-347-5318 or fax 450-347-1976.

For U.S. Technical Support, call 1-888-862-3289

or fax 901-252-1321.

For International Technical Support,

call (U.S.) 901-252-5000, enter 1, 6672.

For Tool Service and Repair,

call 1-800-284-TOOL (8665).

Call 1-800-858-6022 for our toll-free 24-hour

Fax-On-Demand service for technical

documentation, brochures, and product literature

or contact our Internet site at www.tnb.com.

Printed in U.S.A. 11/05/500 Order No. GM-1255

United States

Tel: 901.252.8000

Fax: 901.252.1354

Canada

Tel: 450.347.5318

Fax: 450.347.1976

Technical Services

Tel: 888.862.3289

www.tnb.com

Steel City FABSSADJ Specification

Brand: Steel City

Model: FABSSADJ

Type: Specification

This manual is also suitable for

Download PDF

report

Steel City FABSSADJ Specification

This manual is also suitable for

Steel City FABSSADJ Specification

Related papers

Other documents