Sabrent TH-3DP2 User manual

Thunderbolt 3

Dual DP Display Adapter

Connect Two DP 1.2 Displays to a Thunderbolt

3 interface

TH-3DP2 USER MANUAL

The Thunderbolt

™

3 Dual DP output adapter lets users

easily connect two DP 1.2 Displays to a computer with

Thunderbolt

™

3 interface. This adapter’s output resolution

is up to 4096X2160@60Hz. Plug & Play tool-less

installation makes for an easy setup.

Connect the adapter to an available

Thunderbolt

™

3 port on your computer

Connect your displays to the DP ports

on this adapter

Your displays should automatically extend

Go into your display settings to

customize your screens

DisplayPort

NOTES

4K supported Display is required

for a 4K resolution

Make sure that your Display is set

to the correct Input Source

Some of the first computers to include Thunderbolt

™

require firmware and software updates

Please contact our Technical Support Team

for additional troubleshooting

www.sabrent.com

Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation

or its subsidiaries in the U.S. and/or other countries