TP-LINK KA200E User manual

TP-LINK
Brand
TP-LINK
Model
KA200E
Type
User manual

This manual is also suitable for

Kasa Cam Outdoor Extension Cable www.kasasmart.com
Let’s get started with your Kasa Cam Outdoor Extension Cable.
Open the weatherproof case and
place the power adapter inside.
Close the case and ensure it’s
latched to keep water out.
Put Into the Case
STEP 2
Connect the Cord
Press down on the latch to
remove the plug adapter and slide
the extension cord into position.
STEP 1
Get Your Tools Ready
You'll need a Philips screw driver to
secure the wall mount. Other tools
will vary based on wall materials.
Before You Start
Notes:
1. If you don't need wall anchors, use a 3/32-inch drill bit .
2. If you're using the provided anchors, use a 7/32-inch drill bit.
3. If you need to route the USB cable through a wall, use a 7/8-inch
drill bit, and caulk or sealant is necessary for an exterior wall.
7106508300 REV1.0.1 © 2019 TP-Link
Fasten the cables using wire clips.
Make sure to leave a little slack in
case you need to adjust things
later.
Fasten the Cables
STEP 4
Attach mounting plate to the wall
using the screw provided and
snap the weatherproof case onto
the plate.
Ax the Case
STEP 3
Notes:
1. Place the case at least 18-inches above any areas that may ood
or become submerged in deep snow. Your case can withstand
dust, rain and snow but shouldn’t be submerged in water.
2. Place the case horizontally.
Tip: Before fastening the cables, gently twist them to tightly t the
two outlet holes.
Need help?
?
Visit www.tp-link.com/support
for user guides, FAQs, warranty & more
  • Page 1 1
  • Page 2 2

TP-LINK KA200E User manual

TP-LINK
Brand
TP-LINK
Model
KA200E
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents