Ricoh D7500 Owner's manual

Type
Owner's manual

This manual is also suitable for

How to Connect the Bluetooth Adapter
This manual explains how to connect the Bluetooth adapter included in the pack-
age to the machine. Procedures for connecting the Bluetooth adapter differ de-
pending on whether or not the controller is connected to the machine.
Connect the Bluetooth adapter only to the whiteboard model packaged with the adapt-
er. Do not connect it to other machines.
When connecting a Bluetooth adapter to the machine, turn off the machine’s power.
The Bluetooth adapter included in the package is not guaranteed to work with all de-
vices that the whiteboard packaged with the adapter supports.
When the Controller Is Connected to the Machine
DTW005
Connect the Bluetooth adapter,
included in the package, to the
machine’s USB 2.0 Type-A connec-
tor. When connecting the controller
to the machine, you can use the
Bluetooth adapter in the controller.
You do not need to install the driver
for the Bluetooth adapter.
When the Controller Is Not Connected to the Machine
DTW006
1
2
Connect the USB Type-B For Touch
jack on the machine to the USB
port of a computer, then connect
the Bluetooth adapter included in
the package to the USB 3.0 Type-A
connector on the machine. Install
the driver for the Bluetooth adapter
to use it.
1. USB Type-B For Touch
2. USB 3.0 Type-A
Windows 10
When the Bluetooth adapter is connected to the computer, the driver installation
starts automatically.
Windows 7/8/8.1
Install the driver for the Bluetooth adapter to the computer before connecting the
adapter. Download the driver form the RICOH website (http://www.ricoh.com/).
Use the following procedure to install the driver and connect the adapter:
Make sure the [Power Save] set-1.
ting is disabled.
To check the value of the setting,
press [Menu] to open the On-Screen
Display menu, and then press [
] or
[
] to select [Setting]. For details about
[Power Save], seeSetting Menu,
Operating Instructions.
Turn off the machine.2.
Do not connect the computer or the
Bluetooth adapter yet.
Double-click "Setup.exe" on the 3.
computer to execute the setup.
“Install BTW Software” appears on
the screen.
Click [Yes].4.
Read the license agreement, 5.
and then click [Agree and Install
Bluetooth Software].
Installation starts.
After "No Bluetooth device was 6.
detected. Please make sure that
your Bluetooth device is plugged
in properly in order to continue
installation." is displayed on the
screen, connect the Bluetooth
adapter to the USB 3.0 Type-A
connector on the machine.
Turn on the machine, and then 7.
connect the USB Type-B For
Touch jack on the machine to
the USB port of the computer.
Click [Finish].8.
Restart the computer.9.
The Bluetooth adapter included in the package supports Windows 7/8/8.1/10.
The Bluetooth adapter may not work properly if you connect other devices to the USB
3.0 Type-A connector on the machine while the adapter is connected to the machine.
© 2017 Ricoh Co., Ltd.
EN GB EN US EN AU Y305-7534
  • Page 1 1
  • Page 2 2

Ricoh D7500 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI