Ambar EP 02 User manual

Brand: Ambar

Model: EP 02

Category: Headsets

Type: User manual

Ambar Bluetooth Headset

Model No.: Ambar EP 02

We, the team of Ambar, thank you for your support by purchasing this Bluetooth Earpiece. In

order to help you use all the functions of this Bluetooth in the best possible way to make your

hectic life easier, we have prepared this User Manual for you.

Functions of all Keys/Buttons

(1) Pairing with First Device

Before you make use it for the first time, you need to pair this Bluetooth Earpiece with your mobile

or any other Bluetooth device by following steps:

1. Turn on the Bluetooth, the LED indicator will flash between red and blue alternately. The

Bluetooth will report you “Power on” in your ear if you are wearing it.

2. Turn on your mobile phone's Bluetooth function and search for “Ambar EP 02” from the list

of new available Bluetooth devices. Once you connect, it will report “connected” in your ear.

Next time when you want to connect this Bluetooth to your mobile, you will not need to pair

again. It will be automatically connected.

Image 1.1

(2) Pairing with Second Device

a) After the first cell phone’s pairing is done successfully, first, disconnect it from the first device.

b) Now you can pair the second cell phone the way you did the first one, after the second cell

phone’s pairing is successfully done with voice report “connected”, please connect the first

phone with option “call phone audio” and another device with “media audio”.

(3) Answer/End/Disconnect the call/Redial

a) Once there is an incoming call, press top button on the mic as shown in Image 1.1 to receive

call and also to end a call after conversation. If you do not want to receive a call but

disconnect, you can do so by a long press on the same top button as shown in Image 1.1 for

2-3 seconds.

b) To redial the last call you made, press top button on the mic twice quickly as shown in Image

1.1, it will immediately call the last dialed number even if your mobile screen is not on. It’s

very quick! J

Ambar EP 02

(4) Play/Pause/Next/Previous

In the normal state, press the side button on the mic as shown in Image 1.1 to play the music,

press again to stop/pause the music.

Long press/keep pressing the volume key button to keep increasing or decreasing volume. If you

hit once, it will change to next song/audio when you push towards ‘+’ sign or previous one when

you push towards ‘-‘ sign. You can refer to Image 1.1.

(5) Charging

The product is with built-in rechargeable battery which can be charged by the micro USB cable

provided to you in the package or using any compatible mobile charger. We advise you to charge

your Bluetooth fully before you use it for the first time.

(a) While charging, the Red LED Indicator will light up, after charging is complete, the Red LED

Indicator will be changed to Blue color.

(b) While power is low, the Bluetooth device will report “low battery” every 5 minutes until the

battery is used up. We advise you to charge every 24 hours if you use it daily throughout the day.

(6) How to use Google Assistant or Siri through this Headset?

First of all, you have to make sure that Google Assistant/Siri is already set up in your mobile device

and you are able to use it through your mobile.

After that, simply press the top button on the mic as shown in Image 1.1 of your Bluetooth

Headset to prompt Google Assistant/Siri. Then your mobile will start listening to your commands.

Please note that Bluetooth Headset will just work as microphone and speaker on your mobile’s

behalf while using Google Assistant/Siri. That’s the function/feature in your mobile while this

Headset helps in waking/starting Google Assistant/Siri even without touching your mobile.

(7) How to Change Language of Voice Notifications of Earpiecefrom

English to Chinese or Chinese to English?

Long press the side button on the mic to change the language to Chinese or back to English.

(8) Care and Maintenance

(1) Do not expose the speakerphone to liquid, moisture or humidity.

(2) Do not use abrasive cleaning solvents to clean the speakerphone.

(3) Do not place the speakerphone in high temperature.

(4) Do not expose the speakerphone to contract with sharp objects as this will cause scratching

and damage.

(5) Do not attempt to disassemble the speakerphone, as it does not contain serviceable

components.

(6) If you do not use the speakerphone for the long time, be sure to store it in a dry place, free

extreme temperature, humidity and dust.

(9) Specifications

• Bluetooth Specification: 4.1+EDR

• CSR Chip

• Sweatproof Bluetooth

• In-Built HD Voice Ready Microphone

• Noise Reduction: CVC6.0

• Transmission Distance: 5-10 meters (20-30 feet): WITH NO WALLS OR HINDRANCE IN BETWEEN

• Battery: Lithium-ion 90mAh

• Charging Port: Micro USB

• Charging Time: 60 to 90 minutes

• Continuous Music Playback Time: 6-10 Hours

• Time with moderate use of Music and Talk: up to 48 Hours

• Standby Time: 200 hours

(10) How to wear properly, in any ear either left or right side?

**You can rotate the speaker part with mic to change from left to right or right to left to wear

any of your ears.**

To stay connected for new launches and offers, like our Facebook page and subscribe to YouTube

channel:

Facebook: www.facebook.com/AmbarBluetooth

YouTube: https://tinyurl.com/yxehproe

Website: www.ambartraders.com

In case of any questions, complaint or suggestion, please feel free to write to us at

[email protected]. We will right back to you to help you!

We’re always at your disposal!!

Ambar EP 02 User manual

Brand: Ambar

Model: EP 02

Category: Headsets

Type: User manual

Download PDF

report

Ambar EP 02 User manual

Ambar EP 02 User manual

Related papers

Other documents