2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Toro
  6. Adjustable Stop Bracket Kit, 2016 and Before TurfMaster Walk-Behind Lawn Mower

Toro Adjustable Stop Bracket Kit, 2016 and Before TurfMaster Walk-Behind Lawn Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Adjustable Stop Bracket Kit, 2016 and Before TurfMaster Walk-Behind Lawn Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3412-574RevA
AdjustableStopBracketKit
2016andBeforeTurfMasterWalk-BehindLawnMower
ModelNo.136-7055
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Theadjustablestopbracketkitpreventsthetransmissionfromtippingtothepointwherethetransmissionbeltcomesoff.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Removetheexistingstopbracket.
Adjustablestopbracket1
Bumper1
Hex-headbolt1
2
Flangenut1
Installtheadjustablestopbracket.
1
RemovingtheExistingStop
Bracket
NoPartsRequired
Procedure
1.Movethemachinetoalevelsurface.
2.Releasetheblade-brakebail.
3.Disconnectthespark-plugwirefromthesparkplug.
4.Usethefrontandrearcutting-heightleverstoadjust
themachinetothelowestheight-of-cut.
Note:Adjustingthemachinetothelowest
height-of-cutallowsaccesstothestopbracket
mountingbolt.
5.Tipthemachineontoitsside,withtheairlterfacing
upward,untiltheupperhandlerestsontheground.
DANGER
Tippingthemachinemaycausethefuelto
leak.Fuelisammableandexplosive,and
cancausepersonalinjury.
Runtheenginedrytoremovethefuelwitha
handpump;neversiphonthefuel.
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3412-574*A
6.Useablockofwoodtoholdeachbladesteady(Figure
1).
g197426
Figure1
7.Removetheexistingstopbracketfromthemachineby
removingtheboltandthenutthatsecuresthebracket
tothemachine(Figure2).
g197398
Figure2
1.Bolt3.Nut
2.Existingstopbracket
2
InstallingtheAdjustableStop
Bracket
Partsneededforthisprocedure:
1Adjustablestopbracket
1Bumper
1Hex-headbolt
1Flangenut
Procedure
1.Attachthebumpertotheadjustablestopbracket
(Figure3).
g196914
Figure3
1.Adjustablestopbracket2.Bumper
2.Usethehex-headboltandtheangenuttoinstallthe
bracketontothemachine(Figure4).
g197411
Figure4
1.Hex-headbolt3.Flangenut
2.Bracket4.Transmission
2
3.Adjustthebracketsothatthebumpercontacts,but
doesnotpresson,thetransmission(Figure5).
g199058
Figure5
1.Bumper2.Transmission
4.Torquetheboltto16to20N∙m(145to175in-lb).
5.Torquethenutto17to19N∙m(150to170in-lb).
6.Removetheblockofwoodfromtheblades,connect
thespark-plugwiretothesparkplug,andaddfuelto
thefueltank.
3
/