Toro Adjustable Stop Bracket Kit, 2016 and Before TurfMaster Walk-Behind Lawn Mower Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide
FormNo.3412-574RevA
AdjustableStopBracketKit
2016andBeforeTurfMasterWalk-BehindLawnMower
ModelNo.136-7055
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Theadjustablestopbracketkitpreventsthetransmissionfromtippingtothepointwherethetransmissionbeltcomesoff.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
Removetheexistingstopbracket.
Adjustablestopbracket1
Bumper1
Hex-headbolt1
2
Flangenut1
Installtheadjustablestopbracket.
1
RemovingtheExistingStop
Bracket
NoPartsRequired
Procedure
1.Movethemachinetoalevelsurface.
2.Releasetheblade-brakebail.
3.Disconnectthespark-plugwirefromthesparkplug.
4.Usethefrontandrearcutting-heightleverstoadjust
themachinetothelowestheight-of-cut.
Note:Adjustingthemachinetothelowest
height-of-cutallowsaccesstothestopbracket
mountingbolt.
5.Tipthemachineontoitsside,withtheairlterfacing
upward,untiltheupperhandlerestsontheground.
DANGER
Tippingthemachinemaycausethefuelto
leak.Fuelisammableandexplosive,and
cancausepersonalinjury.
Runtheenginedrytoremovethefuelwitha
handpump;neversiphonthefuel.
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3412-574*A
6.Useablockofwoodtoholdeachbladesteady(Figure
1).
g197426
Figure1
7.Removetheexistingstopbracketfromthemachineby
removingtheboltandthenutthatsecuresthebracket
tothemachine(Figure2).
g197398
Figure2
1.Bolt3.Nut
2.Existingstopbracket
2
InstallingtheAdjustableStop
Bracket
Partsneededforthisprocedure:
1Adjustablestopbracket
1Bumper
1Hex-headbolt
1Flangenut
Procedure
1.Attachthebumpertotheadjustablestopbracket
(Figure3).
g196914
Figure3
1.Adjustablestopbracket2.Bumper
2.Usethehex-headboltandtheangenuttoinstallthe
bracketontothemachine(Figure4).
g197411
Figure4
1.Hex-headbolt3.Flangenut
2.Bracket4.Transmission
2
3.Adjustthebracketsothatthebumpercontacts,but
doesnotpresson,thetransmission(Figure5).
g199058
Figure5
1.Bumper2.Transmission
4.Torquetheboltto16to20N∙m(145to175in-lb).
5.Torquethenutto17to19N∙m(150to170in-lb).
6.Removetheblockofwoodfromtheblades,connect
thespark-plugwiretothesparkplug,andaddfuelto
thefueltank.
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Toro Adjustable Stop Bracket Kit, 2016 and Before TurfMaster Walk-Behind Lawn Mower Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI