Contec BX-825 Owner's manual

IPC Series

BOX-PC 825D Series

Fanless, Atom E3845 1.91GHz

DVI-I, DisplayPort

User’s Manual

CONTEC CO., LTD.

BX-825D User’s manual

i

Check Your Package

Thank you for purchasing the CONTEC product.

The product consists of the items listed below.

Check, with the following list, that your package is complete. If you discover damaged or missing items,

contact your retailer.

Product Configuration List

BX-825D-DC760000

[Base Model]

BX-825D-DC76xxxx *1

[OS Pre-install Model]

Name

Pcs.

The main body

1

CFast card removal prevention fitting

1

USB removal prevention fitting

1

USB / Displayport removal prevention

fitting

1

Cable Tie

2

DVI-analog RGB conversion adapter

1

Washer assembled screw (M3 x 6)

3

Washer assembled and cross recessed

hexagonal bolt (M4 x 10, black)

4 4

Power supply

connector complete set

Power connector

1

Contact

4

Product Guide

1

IPC Precaution List

1

Warranty Certificate

1

Serial Number Label

1

Royalty consent contract (For OS)

- *2

1

Setup Procedure Document

- *2

1

Recovery Media Set

- *2

1

*1 Except for base model.

*2 It is not packed to the base model.

* The User

’

s Guide of this product is offered as the PDF file in our web page. With it, since information such as a

setup of hardware, each component function and BIOS setup is indicated, please refer to it if needed.

ii

BX-825D User’s manual

Product Configuration Image

* See the Product Configuration List to check if all the components are included for the specified number of units.

Copyright

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this

document.

The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for results obtained by the user as a result of using this product.

Trademarks

Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS, Microsoft

and Windows are trademarks of Microsoft Corporation. Other brand and product names are trademarks

of their respective holder.

Royalty consent

contract (For OS)

Setup Procedure

Document

CFast card removal

prevention fitting

Serial Number Label

Warranty Certificate

Recovery Media Set

IPC Precaution ListProduct Guide

Washer assembled and

cross recessed hexagonal bolt

(M4 x 10, black)

USB removal

prevention fitting

Washer assembled

screw (M3 x 6)

The main body

Cable Tie

Product

Guide

IPC

Precaution

List

Warranty

Certificate

XXXXXXXXXXXXX

Royalty

consent

contract

USB / Displayport removal

prevention fitting

Power connector

Contact

Power supplyconnector

complete set

Setup

Procedure

Document

DVI-analog RGB

conversion adapter

BX-825D User’s manual

iii

Table of Contents

Check your package ..................................................................................................................................... i

Copyright ..................................................................................................................................................... ii

Trademarks .................................................................................................................................................. ii

Table of Contents ....................................................................................................................................... iii

1. INTRODUCTION 1

About the Product........................................................................................................................................ 1

Features ................................................................................................................................................. 2

Supported OS ....................................................................................................................................... 2

Customer Support ........................................................................................................................................ 3

Web Site................................................................................................................................................ 3

How to Obtain Service ................................................................................................................................ 3

Liability ........................................................................................................................................................ 3

Safety Precautions ....................................................................................................................................... 4

Safety Information ............................................................................................................................... 4

Caution on the BX-825 Series ............................................................................................................ 4

Mesures de sécurité ..................................................................................................................................... 6

Informations de sécurité ...................................................................................................................... 6

Attention dans le cas de la série BX-825 ........................................................................................... 6

Security Warning ......................................................................................................................................... 9

2. SYSTEM REFERENCE 11

Specifications............................................................................................................................................. 11

Power Management Features ................................................................................................................... 14

Power Requirements ................................................................................................................................. 14

Power Consumption........................................................................................................................... 14

Physical Dimensions ................................................................................................................................. 15

3. HARDWARE SETUP 17

Before Using the Product for the First Time .......................................................................................... 17

Hardware Setup ......................................................................................................................................... 18

Attaching the CFast Attachment Fittings......................................................................................... 18

Attaching the FG ................................................................................................................................ 19

Fastening the Cable............................................................................................................................ 20

Installation Requirements.................................................................................................................. 22

4. BIOS SETUP 25

Introduction ................................................................................................................................................ 25

iv

BX-825D User’s manual

Starting Setup ............................................................................................................................................ 25

Using Setup ................................................................................................................................................ 26

Getting Help ....................................................................................................................................... 26

In Case of Problems ........................................................................................................................... 26

A Final Note About Setup ................................................................................................................. 26

Main Menu ................................................................................................................................................. 27

Setup Items ......................................................................................................................................... 27

Main............................................................................................................................................................ 28

Advanced ................................................................................................................................................... 29

Trusted Computing ............................................................................................................................ 30

ACPI Settings ..................................................................................................................................... 32

Super IO Configuration ..................................................................................................................... 34

Serial Port A Configuration .............................................................................................................. 35

Digital I/O Configuration .................................................................................................................. 36

H/W Monitor ...................................................................................................................................... 37

CPU Configuration ............................................................................................................................ 38

Socket 0 CPU Information ................................................................................................................ 39

PPM Configuration ............................................................................................................................ 40

SATA Configuration ......................................................................................................................... 41

CSM Configuration ........................................................................................................................... 42

Chipset ................................................................................................................................................ 43

North Bridge ....................................................................................................................................... 44

Intel IGD Configuration .................................................................................................................... 45

LCD Control ....................................................................................................................................... 47

South Bridge Configuration .............................................................................................................. 48

Azalia HD Audio ............................................................................................................................... 49

LAN Configuration ............................................................................................................................ 51

Security ...................................................................................................................................................... 52

Secure Boot menu ..................................................................................................................................... 53

Key Management ...................................................................................................................................... 54

Boot Configuration ................................................................................................................................... 55

Save & Exit ................................................................................................................................................ 57

5. EACH COMPONENT FUNCTION 59

Component Name ...................................................................................................................................... 59

Front View .......................................................................................................................................... 59

Rear View ........................................................................................................................................... 59

Component Function ................................................................................................................................. 61

LED: POWER, ALARM................................................................................................................... 61

DC Power Input Connector: DC-IN ................................................................................................. 61

POWER SW ....................................................................................................................................... 62

DVI Interface: DVI-I ......................................................................................................................... 62

Display Port Interface: Display Port ................................................................................................ 63

BX-825D User’s manual

v

USB3.0 Port: USB3.0 ........................................................................................................................ 64

USB2.0 Port: USB2.0 ........................................................................................................................ 64

Giga bit-Ethernet: LAN A, B, C ....................................................................................................... 65

CFast Card Connector: CFast ........................................................................................................... 66

Serial Port Interface: COM Port ....................................................................................................... 67

EXT: EXT Connector ........................................................................................................................ 68

6. APPENDIX 69

POST Codes ............................................................................................................................................... 69

Battery ........................................................................................................................................................ 72

Life of mSATA SSD ................................................................................................................................. 73

7. LIST OF OPTIONAL PRODUCTS 75

vi

BX-825D User’s manual

1. Introduction

BX-825D User’s manual

1

1.

Introduction

About the Product

This product is a fanless computer for embedded applications. It features an Intel Atom processor E3845

chipset. Even though it has a slitless case, it supports a wide range of temperatures from 0 to 55°C and

can be operated stably under harsh operating conditions.

Thanks to its Quad-Core CPU, it can perform stable, high-speed processing of four applications at the

same time (one application is processed by each core). The Quad-Core CPU also greatly reduces power

consumption, with power efficiency improved to at least twice that of the previous generation's

architecture.

It has extension interfaces such as DVI-I, Display Port, 1000BASE-T, USB 3.0, and serial. It employs a

mSATA SSD and CFast card for storage and is fanless to ensure a totally spindleless design that

simplifies maintenance.

Embedded-type CPU have been adopted. The use of readily available parts ensures the ease of the use of

the product. In addition, the use of Contec-customized BIOS allows support to be provided at the BIOS

level.

This product is available in the following models:

- Intel Atom Processor E3845 1.91GHz, without OS

BX-825D-DC760000 (Memory 4GB, ECC, with mSATA SSD 32GB (MLC NAND), without OS)

- Intel Atom Processor E3845 1.91GHz with OS pre-installed

BX-825D-DC761824 (Memory 4GB ECC, with mSATA SSD 32GB (MLC NAND),

Windows 10 IoT Enterprise LTSB 2016 64bit (Japanese, English, Chinese,

Korean) + McAfee)

1. Introduction

2

BX-825D User’s manual

Features

-

Secured IoT device for edge computing

The OS installed model contains the 64-bit version Windows 10 IoT Enterprise that supports in four

languages (Japanese, English, Chinese, and Korean) and McAfee white list type anti-virus software.

This product is pre-equipped as an Internet-connection device.

-

3 Gigabit LAN ports interconnect differing network hierarchy

This product has three Gigabit LAN ports. It is ideal for IoT gateway which interconnects differing

network hierarchy including fieldbus, between controllers, and higher information networks in the

facilities.

- Contributing to reduction of running cost and promotion of energy efficiency

It adopts the low-power platform with Intel

®

Atom

(TM)

Processor E3845 that realizes lower power

consumption while ensuring sufficient performance.

- Supports a wide range of temperatures with operations guaranteed from 0 to 55°C*1

Stable operations of this product are possible over a wide range of temperatures from 0 to 55°C.

*1 This specification applies when forced air cooling is used. Derating may be necessary depending on the usage environment.

- Slitless/fanless design that reduces maintenance work

This product's spindleless design eliminates the heat dissipating slit and CPU fan and adopts SSD for the

storage. There is no need to worry about the intrusion of dust or foreign objects, and the use of parts that

degrade over time is minimized to facilitate maintenance.

- Remote power management function to reduce operation tasks

Supports system startup by external device over network (Wake-on-LAN) and by modem reception

(power on by ring). It encourages significant labor saving in operation.

-

The global safety standard complied

This product complies with CE / CB / UL / CCC / BSMI / KC safety standard, and by applying this PC to

your export equipment, it greatly helps reduce the costs of development and transportation.

- Removal prevention fittings and cable ties are available to prevent problems caused by cable

disconnections.

This product is equipped with a CFast card removal prevention fitting. This prevents problems from

occurring by ensuring that the CFast card does not fall out.

- A wide range of power supplies (9.6 - 31.2VDC) supported

As the product supports a wide range of power (9.6 - 31.2VDC), it can be used in a variety of power

environments. The separately available AC adapter adds support for 100 - 240VAC power.

Supported OS

- Windows 10 IoT Enterprise LTSB 2016 (Japanese, English, Chinese, Korean), 64bit

1. Introduction

BX-825D User’s manual

3

Customer Support

CONTEC provides the following support services for you to use CONTEC products more efficiently and

comfortably.

Web Site

https: //www.contec.com/

Latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical documents in the PDF.

Free download

You can download updated driver software and differential files as well as sample programs available in

several languages.

Note! For product information

Contact your retailer if you have any technical question about a CONTEC product or need its price,

delivery time, or estimate information.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please

obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you

purchased before returning any product.

* No product will be accepted by CONTEC group without the RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be

liable for any incidental or consequential damages due to such defect or consequences that arise from

inexperienced usage, misuse, or malfunction of this device.

1. Introduction

4

BX-825D User’s manual

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting in

injury or death and the destruction of equipment and resources. Understand the meanings of these labels

to operate the equipment safely.

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury or in property damage.

Caution on the BX-825 Series

Handling Precautions

- Always check that the power supply is turned off before connecting or disconnecting power cables.

- Do not modify the product.

- Always turn off the power before inserting or removing circuit boards or cables.

- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other

applications that require a very high level of reliability. Do not use the product in such applications.

- If using this product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

- The exchange of inappropriate battery is at risk of the explosion.

- Please process the used battery according to a manual.

- For battery replacement, contact your retailer as it must be performed as a process of repair.

- When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws

and municipal ordinances. For details on replacing the battery, refer to the appendix.

DANGER

WARNING

CAUTION

W

ARNING

1. Introduction

BX-825D User’s manual

5

- Do not use or store this product in a location exposed to high or low temperature that exceeds range

of specification or susceptible to rapid temperature changes.

Example: - Exposure to direct sun

- In the vicinity of a heat source

- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this

product with its interior penetrated by water or any other fluid or conductive dust. If this product

must be used in such an environment, install it on a dust-proof control panel, for example.

- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of

specification.

- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such

products will cause this product to malfunction.

- Do not use or store this product in the presence of chemicals.

- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.

Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or

discoloration of the paint.

- This product’s case may become hot. To avoid being burned, do not touch that section while this

product is in operation or immediately after turning off the power. Avoid installation in a location

where people may come into contact with that section.

- CONTEC does not provide any guarantee for the integrity of data on CFast.

- Always remove the power cable from the power outlet before mounting or removing an expansion

board and before connecting or disconnecting a connector.

- Always remove the power cable from the power outlet before connecting or disconnecting a

connector.

- As for the product with a D-SUB connector, the appropriate tightening torque for the cable connector

is less than 2 kgf·cm.

- To prevent corruption of files, always shutdown the OS before turning off this product.

- CONTEC reserves the right to refuse to service a product modified by the user.

- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power

cord immediately and contact your retailer.

- To connect with peripherals, use a grounded, shielded cable.

- The CFast card connector doesn't support hot plug. The pulling out opening of the CFast card cannot

be done in the state of power supply ON. Please neither pulling out opening of CFast in the state of

power supply ON of this product nor come in contact with CFast. This product may malfunction or

cause a failure.

- If you use any other CFast than our CFast, we can not guarantee this product’s specification. When

you newly select CFast for this product, you should read “Chapter 7” at first. If you select

unpreferable CFast, the system may work out of order.

- Component Life:

(1) Battery---The internal calendar clock and CMOS RAM are backed by a Lithium primary battery.

The backup time at a temperature of 25°C with the power disconnected is 10 years or

more.

(2) mSATA SSD--- This product contains mSATA SSD for OS storage area. Estimated life

endurance is 3,000 rewriting times per block.

* Replacement of expendables is handled as a repair (there will be a charge).

* The service life for consumable parts are reference values and are not guaranteed values.

* This product's specifications allow the device to be rebooted from the BIOS screen during startup.

This has no effect on operation after the OS boots.

CAUTION

1. Introduction

6

BX-825D User’s manual

Mesures de sécurité

Veillez à comprendre les définitions et mesures de précautions suivantes afin d’utiliser le produit en toute

sécurité.

Informations de sécurité

Ce document contient des informations relatives à la sécurité, sous utilisation des symboles suivant, afin

d’éviter tout accident risquant d’entraîner des blessures ou la mort et la destruction de l’équipement et des

ressources. Veillez à comprendre les significations de ces mots signalétiques pour utiliser l’équipement en

toute sécurité.

DANGER indique une situation dangereuse imminente qui, si elle n’est pas évitée,

entraînera des blessures graves, voire la mort.

AVERTISSEMENT indique une situation potentiellement dangereuse qui, si elle

n’est pas évitée, risque d’entraîner des blessures graves, voire la mort.

ATTENTION indique une situation potentiellement dangereuse qui, si elle n’est pas

évitée, risque d’entraîner des blessures de gravité mineure à moyenne ou des

dommages matériels.

Attention dans le cas de la série BX-825

Mesures de précaution pour la manipulation

- Toujours contrôler que l’alimentation électrique est coupée avant de brancher ou de débrancher les

câbles électriques.

- Ne pas modifier le produit.

- Toujours couper l’alimentation électrique avant d’ajouter ou de retirer des circuits imprimés ou des

câbles.

- Ce produit n’est pas destiné à une utilisation dans l’aérospatial, le spatial, l’énergie nucléaire, la

technique médicale, ou d’autres applications requérant un très haut niveau de fiabilité. Ne pas utiliser

le produit dans de telles applications.

- Dans le cas d’une utilisation de ce produit dans les applications où la sécurité est critique, telles que

dans le ferroviaire, l’automobile, la prévention des catastrophes ou les systèmes de sécurité, veuillez

contacter votre revendeur.

- L’échange de la batterie contre une batterie inadaptée représente un risque d’explosion.

- Veuillez manipuler la batterie usagée comme indiqué dans le manuel.

- Pour le remplacement de la batterie, veuillez contacter votre revendeur, comme cela doit être réalisé

en tant que processus de réparation.

- Dans le cas de la mise au rebut d’une batterie usagée, suivre les procédures de mise au rebut stipulée

par les lois et les réglementations municipales applicables. Reportez-vous à l’annexe concernant les

détails relatifs à l’échange de la batterie.

1. Introduction

BX-825D User’s manual

7

-

Ne pas utiliser ni entreposer ce produit dans un emplacement exposé à de hautes ou basses

températures dépassant la plage des spécifications ou soumis à de rapides variations de température.

Exemple : - Exposition à un ensoleillement direct

- - À proximité d’une source de chaleur

- Ne pas utiliser ce produit dans des emplacements extrêmement humides ou poussiéreux. Il est

extrêmement dangereux d’utiliser ce produit lorsque de l’eau, un autre fluide ou de la poussière

conductrice a pénétré à l’intérieur. Si ce produit doit être utilisé dans un tel environnement, l’installer

par exemple dans un panneau de commande étanche à la poussière.

- Éviter d’utiliser ou d’entreposer ce produit dans des emplacements soumis à des chocs ou des

vibrations dépassant la plage des spécifications.

- Ne pas utiliser ce produit à proximité d’appareils générant de forts forces ou bruits magnétiques. De

tels appareils entraîneront des dysfonctionnements de ce produit.

- Ne pas utiliser ou entreposer ce produit en présence de produits chimiques.

- Pour nettoyer ce produit, essuyez légèrement avec un chiffon doux humidifié soit avec de l’eau, soit

avec un détergent doux. Ne pas utiliser de produits chimiques ni de solvants volatiles, comme du

benzène ou un diluant, pour éviter un décollement ou une décoloration de la peinture.

- Le boîtier du produit peut chauffer. Pour éviter de se brûler, ne pas toucher cette partie tant que

produit est en service ou immédiatement après avoir coupé l’alimentation. Éviter de l’installer dans

un emplacement où des personnes risqueraient d’entrer en contact avec cette partie.

- CONTEC ne donne aucune garantie concernant l’intégrité des données contenue sur la CFast.

- Toujours débrancher le câble électrique de la prise électrique avant de monter ou de retirer une carte

d’extension et avant de brancher ou de débrancher un connecteur.

- Toujours débrancher le câble électrique de la prise électrique avant de brancher ou de débrancher un

connecteur.

- Afin de prévenir une altération des fichiers, toujours arrêter le système d’exploitation avant d’arrêter

ce produit.

- CONTEC se réserve le droit de refuser l’entretien de produits modifiés par l’utilisateur.

- En présence de défauts ou d’anormalité (odeurs nauséabondes ou génération excessive de chaleur),

débrancher immédiatement le câble électrique et contacter votre revendeur.

- Pour relier des périphériques, utiliser un câble mis à la terre et blindé.

- Le connecteur de carte CFast ne prend pas en charge l’insertion à chaud. L’éjection ou l’insertion de

la carte CFast ne peut pas s’effectuer lorsque que l’alimentation électrique est active. Ne jamais

éjecter, ni insérer, ni entrer en contact avec la CFast lorsque ce produit est sous tension électrique.

Ceci peut entraîner un dysfonctionnement ou un défaut de ce produit.

- Ne jamais utiliser une autre CFast que celle que nous fournissons, comme nous ne pourrons sinon

plus garantir les caractéristiques de ce produit. Avant de sélectionner une nouvelle CFast pour ce

produit, lisez le « Chapitre 7 ». La sélection d’une CFast inadaptée peut entraîner une panne dans le

système.

- Alimentation du composant :

(1) Batterie --- l’alimentation de l’horloge-calendrier interne et de la CMOS RAM est assurée par

batterie primaire au lithium.

Le temps de soutien par une température de 25°et C par alimentation coupée est supérieur à 10 ans.

1. Introduction

8

BX-825D User’s manual

(2) mSATA SSD ---Ce produit contient mSATA SSD pour la zone de stockage du système d'exploitation.

La durée de vie estimée est de 3 000 temps de réécriture par bloc.

* Le remplacement d’extensions fait l’objet d’une procédure de réparation (soumise à frais).

* La durée de vie utile de pièces consommables est donnée à titre de référence sans aucune garantie.

* Les caractéristiques de ce produit permettent de réamorcer l’appareil à partir de l’écran BIOS

pendant le démarrage.

Ceci reste sans influence sur le fonctionnement après l’amorçage du système d’exploitation

FCC PART15 Class A Notice

KC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

NOTE

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

이 기기는 업무용 환경에서 사용할 목적으로

적합성평가를 받은 기기로서 가정용 환경에서

사용하는 경우 전파간섭의 우려가 있습니다.

1. Introduction

BX-825D User’s manual

9

Security Warning

When connecting to the network, be aware of security-related problems. See the examples of Security

measures below and set up the product properly along with the network devices.

[Information security risks]

- Unauthorized access from the outside through a network could cause the system halt, data damage, or

exposure to malware

*1

.

- Invaded and used as a stepping stone, a device might attack the others through networks.

(a victim becomes an assailant)

- Information might leak without realizing due to the connection to the network.

- Secondary damages such as harmful rumors, liability in damages, social credibility fall, and opportunity

loss are expected led by the troubles described above.

*1… Malware (Malicious Software) is software that brings harm to a computer system and performs unintended operations.

[Security measures - e.g.]

- Do not keep using the default password. (Refer to the product manual for the password setting).

- Set a strong password.

⇒Combined with upper and lowercase letters, and numbers so that it cannot be easily analogized

by others.

- Change the password periodically.

- Disable unnecessary network services and functions.

- Restrict access to the network with network devices.

*2

- Restrict ports to be released on the network with network devices.

- Create a closed network connection using such as dedicated network or VPN

*3

.

*2…Inquire for setting procedure to manufacturers.

*3…VPN (Virtual Private Network): a secured network that wards off unauthorized access by protecting the communication path with

authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole that are

endlessly found day and night. Please understand that risks are always involved with the Internet

connection, and we strongly recommend a user should constantly update information security measures.

1. Introduction

10

BX-825D User’s manual

2. System Reference

BX-825D User’s manual

11

2.

System Reference

Specifications

Table 2.1. Functional Specifications < 1 / 2 >

Model

BX-825D-DC76xxxx

CPU Intel® Atom™ Processor E3845 1.91GHz

BIOS

BIOS (mfd. by AMI)

Memory

4GB, 204pin SO-DIMM socket x 1, PC3-10600(DDR3L 1333) ECC

Graphic

Intel® HD Graphics (built-in CPU)

System

resolution

Analog RGB

640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,

1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,

1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors)

DVI-D

640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,

1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,

1,600x900, 1,680x1,050, 1,920x1,080 (16,770,000 colors)

Display Port

640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,

1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,

1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors)

Internal storage

mSATA SSD × 1, 32 GB (MLC NAND) built in *1

CFast card slot 1 slot, CFast CARD Type I x 1 bootable

LAN *2

Intel I210IT Controller

1000BASE-T/100BASE-TX/10BASE-T 3 port (Wake On LAN support)

USB

USB 3.0 compliant 2 port

USB 2.0 compliant 3 port

Serial I/F

RS-232C/422/485 : 1port (SERIAL PORTA), 9pin D-SUB connector (male)

Baud rate : 50 - 115,200bps, switched from the BIOS

General-purpose I/O

General-purpose TTL type (non-isolated), Input 7 channels, Output 8 channels,

Remote power on SW contact input

Hardware monitoring

Monitoring CPU temperature, power voltage

RTC/CMOS

Lithium backup battery life: 10 years or more.

The real-time clock is accurate within ±3 minutes (at 25°C) per month

Power Management

Power management setup via BIOS, Power On by Ring / Wake On LAN,

Supports PC98/PC99 ACPI Power management

Secutity (TPM)

TCG TPM2.0

2. System Reference

12

BX-825D User’s manual

Table 2.1. Functional Specifications < 2 / 2 >

Model

BX-825D-DC76xxxx

Interface

Display

DVI-I x 1 (29pin DVI-I connector), Display Port x1

mSATA

32 GB (MLC NAND) built in *1

CFast card slot

1 slot

LAN *2 3 port (RJ-45 connector)

USB

USB3.0 compliant 2port (TYPE-A connector x2)

USB2.0 compliant 3port (TYPE-A connector x3)

RS-232C/422/485

1 port (9pin D-SUB connector [male]), switched from the BIOS

General-purpose I/O

General-purpose TTL type (non-isolated), 7 input channels, 8 output channels (connector

specifications: 25-pin D-SUB connector [male]), 1 remote power SW contact input

Power supply

Rated input voltage

12 - 24VDC *3

Range of input voltage

9.6 - 31.2VDC (no power supply protection function)

Power consumption

12V 3.0A, 24V 1.6A

External device power

supply capacity

CFast card slot: 3.3V: 0.5A(500mAx1)

USB3.0 I/F: +5V: 1.8A (900mAx1)

USB2.0 I/F: +5V: 1.5A (500mAx2)

Physical dimensions

(mm)

220 (W) x 118.9 (D) x 49.8 (H) (No protrusions)

Weight

About 1.2kg (Excluding attachment fittings)

*1: The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that can be recognized from

OS might be displayed fewer than an actual value.

*2: If you use the 1000BASE-T, be careful of the operating temperature.

For more details on this, refer to chapter3, Installation Requirements.

*3: Use a power cable shorter than 3m.

2. System Reference

BX-825D User’s manual

13

Table 2.2. Installation Environment Requirements

Model

BX-825D-DC76xxxx

Ambient

specifications

Operating temperature

0 - 55°C (When using 1000BASE-T: 0 - 50°C), During natural air cooling

0 - 55°C (During forced air cooling (0.5m/s))

Storage temperature

-10 - 70°C

Humidity

10 - 90%RH (No condensation)

Floating dust particles

Not to be excessive (JEITA IT-1004A ClassA)

Corrosive gases An environment with a low amount of corrosive gas (JEITA IT-1004A ClassB)

Line-noise

resistance

Line noise

AC line / ±2kV *4,

Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)

Static

electricity

resistance

Contact discharge / ±4kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 2)

Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)

Vibration

resistance

Sweep

resistance

10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G

60 min. each in x, y, and z directions

(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)

Impact resistance

100G, half-sine shock for 6 ms in x, y, and z directions

(JIS C60068-2-27-compliant, IEC60068-2-27-compliant)

Grounding

Class D grounding, SG-FG / continuity

Standard

VCCI Class A, FCC Class A,

CE Marking (EMC Directive Class A, RoHS Directive),

CCC, UL

(

component certification

),

KC, BSMI, CB

*4: When AC adapter “PWA-65AWD1” is used.

Page is loading ...

Contec BX-825 Owner's manual

Related papers

Other documents