Kingston Technology KVR100X64SC2L/128 Datasheet

Category
Memory modules
Type
Datasheet
Memory Module Specification
DESCRIPTION:
This document describes ValueRAM's CL2 16M x 64-bit (128MB) SDRAM (Synchronous
DRAM) PC100 Small Outline DIMM memory module. The components on this module include
eight 8M x 16-bit (2M x 16-bit x 4 Bank / PC100 components) 4K Refresh SDRAM in TSOP
packages. This 144-pin SODIMM uses gold contact fingers and requires +3.3V. The electrical
and mechanical specifications are as follows:
FEATURES:
CLK Cycle Time (tCC) min. = 10ns (CAS Latency = 2 / max. = 1000ns)
Row Cycle Time (tRC) 70ns
CLK to Output (tSAC) max. = 6ns (CAS Latency = 2)
Single Power Supply of +3.3V (+/- .3V)
Power 2.244 W (operating)
UL Rating 94 V - 0
Document No. VALUERAM0228-001.A00
03/01/02
KVR100X64SC2L/128
128MB PC100 144-Pin SDRAM
SODIMM Memory Module
Figure 1: KVR100X64SC2L/128 128MB 144-Pin SDRAM Module
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
Tolerances : ±.006(.15) unless otherwise specified
2.66
2.50
Units : Inches (Millimeters)
2-R 0.078 Min
(2.00 Min)
0.18
(4.60)
0.91
(23.20)
1.29
(32.80)
0.24
(6.0)
0.13
0.79
(20.00)
(3.30)
(63.60)
(67.56)
2-f 0.07
(1.80)
1.05
(26.67)
0.16 ± 0.039
(4.00
± 0.10)
0.083
(2.10)
0.10
(2.50)
Z Y
0.15
(3.70)
1 59 61 143
2 60 62 144
Detail Z
0.16 ± 0.0039
(4.00
± 0.10)
0.06
± 0.0039
(1.50
± 0.1)
0.150 Max
0.04 ± 0.0039
(1.00 ± 0.10)
0.125 Min
(3.20 Min)
(3.80 Max)
0.157 Min
(4.00 Min)
0.03 TYP
0.024
± 0.001
0.01 Max
(0.25 Max)
(0.60 ± 0.05 )
(0.80 TYP )
0.10 Min
(2.55 Min)
Detail Y
  • Page 1 1

Kingston Technology KVR100X64SC2L/128 Datasheet

Category
Memory modules
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI