Senco SHF10 User manual

The new SENCO SHF10 single strike cleat nailer offers a low cost

alternative to the professional installer who wants the efficiency of

setting floor boards and driving nails with a single blow. It has a

rugged composite base that virtually eliminates scratching and

damage to the surface of both unfinished and prefinished wood.

And at only 7.6 lbs., the SHF10 is ergonomically designed with

the hardwood installer in mind.

Tool Specifications:

Tool Weight: 7.6 lbs. (3.5 kg)

Height: 17 3/4" (451 mm)

Length: 14 3/8" (365 mm)

Capacity: 110

Fastener Specifications:

The SHF10 drives 1 1/2" (38mm), 1 3/4" (45mm) or 2" (50mm)

“L” type cleat nails.

SHF10 Manual Hardwood Flooring Nailer

NEW!

Applications:

For the installation of 1/2" (12mm) to 33/32" (26mm)

hardwood flooring. (1/2" applications require optional adapter.)

Features:

• Mallet-actuated firing simultaneously sets floor boards

(tongue into groove) and drives cleat nails at an ideal 45° angle.

3 1/2 lb. (1.6 kg) mallet included.

• Unlike staples, cleat nails minimize wood splitting and still

allow for expansion and contraction of flooring materials.

• Ergonomically designed for improved productivity, less

fatigue and ease of operation.

• Composite base virtually eliminates scratching and damage

to the surface of both unfinished and prefinished wood.

• Easy two step loading.

• Comfort grip handle.

For additional information on how SENCO fastening systems will save

you time, reduce costs and increase quality, call your nearest Authorized

SENCO Dealer or Distributor listed in the Yellow Pages under “Staples”,

or call our toll-free Action Line at 1-800-543-4596. You can also visit

our website at www.senco.com.

Single Strike

Model

1 3/4"

1 1/2"