2. GE
  3. ISOVOLT Titan E
ISOVOLT Titan E

GE ISOVOLT Titan E Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the GE ISOVOLT Titan E Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GE Inspection Technologies
Xray
SEIFERT X-ray Tubehousing
ISOVOLT 160 M2 / 0.4-0.4 HP
Application
The application of this tube is recom-
mended for all cases where only a
0.4 focal spot can be used.
Features
• Direct radiating tube with double focus, unipolar, grounded anode, water cooled
• Metal-ceramic tube with oblique anode and beryllium window
• Compatible with X-ray equipment of the ISOVOLT series
• Produced under ISO 9001 certified quality management system
Options
• Quick-lock cable flange
• Centering and collimator attachment with laser centering device or telescopic rod
• Tube yokes
• Beam shutters
• Motorized limiting diaphragms
In these cases the two identical small
focal spots could contribute to an ex-
tended lifetime.
The main application is therefore the so-
phisticated radioscopic inspection.
GE Inspection Technologies
Xray
GEInspectionTechnologies.com
53.5 (2.1")
40˚
∅ 110 (4.4")
∅ 100 (4")
304 (12")
506 (20")
0 20 40 60 80 100 120 140 160
1
4
2
3
5
6
Tubenhousings
Wire IQI [%]
Material thickness Al [mm]
: 160 MM2 (geometr. magnification 6:1)
: 160 M2 (with image enhancement)
: 160 M2
40
35
30
25
20
15
10
5
0
40 600 20 80 100 120 140 160 180
mA
kV
We reserve the right to technical modifications without prior notice.
©2004 General Electric Company. All rights reserved.
GEIT-30131GB (04/05)
The generation of radiation in an X-ray
tube solely depends on the operation
values, not on the make.
The dose rate relevant in practice and
suitable for calculations of radiation
protection values is defined by national
standards; thus the dose rate of the tube-
housing ISOVOLT 160 M2/0.4-0.4HP,
measured at a distance of 1 m from the
focal spot, amounts to 2.5 Sv/h at max-
imum tube voltage and maximum anode
dissipation.
This value must not be used to assess
biological effects.
The dose rate of the leakage radiation is
< 2.5 mSv/h (250 mrem/h).
Dose Rate within the Central Beam
Technical Data
Maximum tube voltage 160 kV
Focal spot 1 Focal spot 2
Maximum anode dissipation 1000 W 1000 W
Tube current at max. tube voltage 6 mA 6 mA
Focal spot size (EN 12 543) 1.00 mm (~ 0.4 IEC 336) 1.00 mm (~ 0.4 IEC 336)
Emergent beam angle 40°
Inherent filtration 1 mm Be
High voltage connection Plug socket for rubber cone plug R24 with optional quick-lock cable flange
Cooling water flow rate min. 4 l/min
Cooling water temperature max. 35° C
Cooling water pressure max. 6 bar
Weight (with optional cable quick-lock) 8.5 kg (18.7 lbs)
Dimensions see drawing
/