Hampton Bay 73996 Installation guide

Brand
Hampton Bay
Model
73996
Type
Installation guide
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this 3 Light LED Vanity Fixture.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
3 LIGHT LED VANITY FIXTURE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1855HDHAMPTON
HAMPTONBAY.COM
SKU #1000488936
2 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Safety Information
IMPORTANT SAFETY INFORMATION
For your safety, always remember to:
□ Turn o the power supply at the fuse or circuit breaker box
before you install the xture.
□ Ground the xture to avoid potential electric shocks and to
ensure reliable starting.
□ Double-check all connections to be sure they are
tight and correct.
□ Wear rubber soled shoes and work on a sturdy
wooden ladder.
This xture is designed for use in a circuit protected by a fuse or
circuit breaker. It is also designed to be installed in accordance
with local electrical codes. If you are unsure about your wiring,
consult a qualied electrician or local electrical inspector, and
check your local electrical code.
Account for small parts and destroy packing material, as these
may be hazardous to children.
CAUTION: TURN OFF THE MAIN POWER AT THE
CIRCUIT BREAKER BEFORE INSTALLING THE FIXTURE,
IN ORDER TO PREVENT POSSIBLE SHOCK.
GENERAL: All electrical connections must be in accordance with
local and National Electrical Code (N.E.C.) standards. If you are
unfamiliar with proper electrical wiring connections obtain
the services of a qualied electrician.
Remove the xture and the mounting package from the box
and make sure that no parts are missing by referencing the
illustrations on the installation instructions.
Warranty
LIMITED WARRANTY
This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails
to do so, please contact our Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
QUESTIONS, PROBLEMS, MISSING PARTS
Before returning to your local Home Depot, please call our Customer Service team at 1-855-HD-HAMPTON or
visit www.hamptonbay.com. Please reference your SKU (1000-488-936 3 Light LED Vanity Fixture).
WARNING: RISK OF SHOCK House electric current
can cause painful shock or serious injury unless
handled properly.
WARNING: RISK OF CUTS Some metal parts in the
xture may have sharp edges. To prevent cuts and
scrapes, wear gloves when handling the parts.
3
HARDWARE INCLUDED (parts are not to scale):
Part Description Quantity
AA
Mounting Plate 1
BB
Outlet Box Mounting Screws 2
CC
Fixture Mounting Screws and Nuts 2
DD
Wire Nuts 3
EE Finials 3
AA
A B C
BB CC DD
EE
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
Phillips Screwdriver
TOOLS REQUIRED FOR INSTALLATION (not included):
Pre-Installation
Part Description Quantity
A Glass Shade
C Fixture Body
3
3
1
B Coupling Lens Fasteners
4 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
C) Fixture Body
Holder
A) Glass Shade
B) Coupling Lens
Fastener
Assembly
1. Shut o power at the fuse box or circuit breaker box. If necessary. Remove the old xture
and all mounting hardware from the wall outlet box.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Take care
not to lose any small parts necessary for installation.
5
NOTE: Hand tighten finials only. Do not use any tools
as overtightening may occur causing damage to the
fixture housing.
Insert the xture mounting screws (CC) into the mounting
plate (AA) and secure by tightening the nuts (CC) against
the mounting plate. Make sure the mounting screws (CC)
do not protrude too much or too little from the mounting
plate. You may need to adjust them to proper length.
Tighten the nuts on the screws (CC) to secure the screws
(CC) against the mounting plate (AA).
Ataching the xture screws to
the mounting plate
CC
CC
A
B
EE
GREEN
GROUND
NEUTRAL
WHITE
BLACK
POWER
SUPPLY WIRE
AA
AA
DD
OUTLET BOX
CC
Connecting the wires
Installing the glass shades and bulbs
Attaching the xture
Ataching the mounting plate to
the outlet box
Attach the mounting plate (AA) to the outlet box by
inserting the two outlet box mounting screws (BB) through
slots in the mounting plate (AA).
Using the wire nuts (DD) provided to connect the green
wire from the fixture to the green or bare copper ground
(house) wire. If the outlet box is grounded, you may fasten
the fixture ground wire directly to the outlet box. Connect
the white fixture wire(s) to the neutral supply wire.
Connect the black fixture wire(s) to the power supply wire.
Insert the xture mounting screws (CC) through the
fixture housing holes and secure by hand tightening
the nials (EE) to the ends of the xture mounting
screws (CC).
Slide the glass shade (A) into the glass holder and
secure by screwing the coupling lens fastener (B) onto
the glass holder. Repeat for the remaining glass shades.
Hand tighten only.
1
2
3
4
5
Mounting Instructions
CAUTION: TURN OFF THE MAIN POWER AT THE
CIRCUIT BREAKER BEFORE INSTALLING THE FIXTURE
IN ORDER TO PREVENT POSSIBLE SHOCK.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Hampton Bay 73996 Installation guide

Brand
Hampton Bay
Model
73996
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents