Highpoint RocketRAID 4522SGL Installation guide

1

Installing HighPoint RAID Driver on

Microsoft Windows 10

Quick Installation Guide

Revision: 1.0

2

HighPoint Technologies, Inc.

Copyright

any purpose without the express written permission of HighPoint Technologies, Inc.

Trademarks

Companies and products mentioned in this manual are for identification purpose only. Product names or brand

names appearing in this manual may or may not be registered trademarks or copyrights of their respective owners.

Backup your important data before using HighPoint's products and use at your own risk. In no event shall HighPoint

be liable for any loss of profits, or for direct, indirect, special, incidental or consequential damages arising from any

defect or error in HighPoint's products or manuals. Information in this manual is subject to change without notice

and does not represent a commitment on the part of HighPoint.

Notice

Reasonable effort has been made to ensure that the information in this manual is accurate. HighPoint assumes no

liability for technical inaccuracies, typographical, or other errors contained herein.

3

Table of Contents

Consider the following before you install the driver ..................................................... 4

Perform the following steps to install the Windows 8 driver ........................................ 4

Thank You ................................................................................................................... 8

Customer Support ....................................................................................................... 9

4

Consider the following before you install the driver:

 If you want to use the RocketRAID controller for primary storage you will need to make sure the

bootable partition is less than 2TB. You will need to have the Windows 10 driver put on a USB, CD disc,

or DVD disc.

 If you want to use the RocketRAID controller as secondary storage download the latest drivers from

the HighPoint website and follow the steps below.

Perform the following steps to install the Windows 8 driver.

1. Boot the Microsoft Windows 10 OS. Right click the Windows logo and then select the “Device

Manager” from the pop-up menu.

5

Figure 1: Device Manager

2. Locate the RAID Controller from the Device Manager. Right click the RAID Controller device and

select Update Driver Software from the pop-up window.

Figure 2: Update Driver Software Option

6

3. In the Update Driver Software wizard, select Browse My Computer to locate the updated driver.

When the driver is found, click Install to confirm.

Figure 3: Install Button

7

4. The installation wizard presents progress screens and announces the completion of the installation.

5. After the driver is installed, reboot the system if required.

8

Thank You

Thank you for purchasing HighPoint product. We appreciate your support, and welcome any questions, comments or

product suggestions you may have.

9

Customer Support

If you encounter any problems while utilizing RocketRAID series host adapters, or have any questions about this or

any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department.

HighPoint Technologies, Inc. websites:

http://www.highpoint-tech.com/

Web Support:

http://www.highpoint-tech.com/websupport/

Highpoint RocketRAID 4522SGL Installation guide

Highpoint RocketRAID 4522SGL Installation guide

Related papers