Highpoint RocketRAID 2720C2 provides high performance and data protection for business-critical applications. It features:
- 8-port 12Gb/s SAS/SATA controller for connecting up to eight storage devices.
- RAID 0, 1, 5, 6, 10, 50, 60 support for creating redundant arrays to protect data from drive failures.
- NVMe support for connecting high-speed NVMe SSDs.
- Web-based management for easy configuration and monitoring.
- CacheVault flash cache for accelerating read and write performance.
- DataBolt write acceleration for improving write performance in write-intensive applications.
Highpoint RocketRAID 2720C2 provides high performance and data protection for business-critical applications. It features:
- 8-port 12Gb/s SAS/SATA controller for connecting up to eight storage devices.
- RAID 0, 1, 5, 6, 10, 50, 60 support for creating redundant arrays to protect data from drive failures.
- NVMe support for connecting high-speed NVMe SSDs.
- Web-based management for easy configuration and monitoring.
- CacheVault flash cache for accelerating read and write performance.
- DataBolt write acceleration for improving write performance in write-intensive applications.
1
Installing a RocketRAID Driver on
Microsoft Windows 8
User’s Guide
Revision: 1.0
Nov. 2, 2012
HighPoint Technologies, Inc.
2
Copyright
Copyright © 2012 HighPoint Technologies, Inc. This document contains materials protected by
International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted
or transcribed in any form and for any purpose without the express written permission of HighPoint
Technologies, Inc.
Trademarks
Companies and products mentioned in this manual are for identification purpose only. Product names or
brand names appearing in this manual may or may not be registered trademarks or copyrights of their
respective owners. Backup your important data before using HighPoint's products and use at your own
risk. In no event shall HighPoint be liable for any loss of profits, or for direct, indirect, special, incidental
or consequential damages arising from any defect or error in HighPoint's products or manuals.
Information in this manual is subject to change without notice and does not represent a commitment on
the part of HighPoint.
Notice
Reasonable effort has been made to ensure that the information in this manual is accurate. HighPoint
assumes no liability for technical inaccuracies, typographical, or other errors contained herein.
3
Table of Contents
Consider the following before you install the driver ..................................................... 4
Perform the following steps to install the Windows 8 driver ........................................ 4
Thank You ................................................................................................................... 7
Customer Support ....................................................................................................... 8
4
Consider the following before you install the driver:
If you want to use the RocketRAID controller for primary storage you will need to
make sure the bootable partition is less than 2TB. You will need to have the Windows
8 driver put on a USB, CD disc, or DVD disc.
If you want to use the RocketRAID controller as secondary storage download the
latest drivers from the HighPoint website and follow the steps below.
Perform the following steps to install the Windows 8 driver.
1. Boot the Microsoft Windows 8 OS and then move the mouse to the upper or lower-
right corner of the screen to expose the desk icons for Search, Share, Start, Devices
and Settings:
Figure 1: Settings Options
2. Click on Settings.
3. On the Settings Bar, click on Control Panel.
Figure 2: Settings Menu
5
4. In the Control Panel, click Hardware and Sound:
Figure 3: Hardware and Sound Selection:
5. In Hardware and Sound, click Device Manager under the heading Devices and
Printers.
Figure 4: Device Manager
6
6. In the Device Manger, expand the sub-menu under Storage Controllers and right-
click Update Driver Software.
Figure 5: Update Driver Software Option
7. In the Update Driver Software wizard, select Browse My Computer to locate the
updated driver.
8. When the driver is found, click Install to confirm.
Figure 6: Install Button
9. The installation wizard presents progress screens and announces the completion of
the installation.
10. After the driver is installed, reboot the system.
7
Thank You
Thank you for purchasing HighPoint product. We appreciate your support, and welcome any questions,
comments or product suggestions you may have.
8
Customer Support
If you encounter any problems while utilizing RocketRAID series host adapters, or have any questions
about this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support
Department.
HighPoint Technologies, Inc. websites:
http://www.highpoint-tech.com/
Web Support:
http://www.highpoint-tech.com/websupport/
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Highpoint RocketRAID 2720C2 provides high performance and data protection for business-critical applications. It features:
- 8-port 12Gb/s SAS/SATA controller for connecting up to eight storage devices.
- RAID 0, 1, 5, 6, 10, 50, 60 support for creating redundant arrays to protect data from drive failures.
- NVMe support for connecting high-speed NVMe SSDs.
- Web-based management for easy configuration and monitoring.
- CacheVault flash cache for accelerating read and write performance.
- DataBolt write acceleration for improving write performance in write-intensive applications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Highpoint RocketRAID 2744 Installation guide
-
Highpoint RocketRAID 2721 User guide
-
Highpoint RocketRAID 644LS User manual
-
-
Highpoint RocketStor 6418AS User manual
-
-
-
-
-