bObsweep WB4727546CH User manual

Quick Start Guide

Congratulations on your new Bob and welcome to the bObsweep family!

Everything Bob needsfor his first clean can be found inside his box.

In just a few easy steps, Bob will be ready to work!

Install Bob’s Side Brush Bob’s side brush allows him to sweep along corners,

walls, and other hard-to- reach places. To install the side brush: Flip Bob over onto a

flat surface. Secure the side brush into the socket on Bob’s underside using the flathead

screwdriver and a screw found in Bob’s box.

Charge Bob Plug the charging adapter into the side of the charging station.

The station’s red power light will turn on. Place Bob on his charging station with the

metal plates on his underside lined up with the nodes on his station.

Prepare Bob’s Remote Bob’s FullCommand™ remote runs on 2 AAA batteries (not included).

Bob is now ready to clean!

Press the START button on his cover

— or AUTO on his FullCommand™ remote —

and he will clean on his default

Robot setting.

Before setting Bob to work,

clear his way of wires or objects that may tangle his brushes.

The ‘speed’ button on the remote allows you to shift between Bob’s

2 speeds, and set him for a slow and thorough cleaning, or a quick and casual one.

Do not expect Bob to see what humans see and move the way we would!

Bob works based on his own algorithms and does not have the same information about his

surrounding as humans do. When it is time to charge for example, he looks around for his charging

station but will only detect it when he faces it. That’s why bObsweep saves the last 15% of his battery

to find his home. To increase Bob’s success rate in finding his home, make sure the station has

an open space in front and sides, and is placed on a hard, flat surface.

Keep the charging station away from your TV or other devices that use infrared signals.

In the box, you will find 6 protective bumper stickers that can be used to mitigate Bob’s impact

on delicate furniture. If you wish to use them, attach them horizontally on Bob’s front bumper

above the transparent sensor cover (be careful not to cover the sensors).

Check our website for the regular additions of “how-to” videos:

http://owners.bobsweep.com

Our devoted team is always eager to help you. You can reach us by phone or e-mail.

Call us toll free 1-888-549-8847 for support in Canada and the United States.

One last reminder: It is our utmost priority to exceed your expectations and provide

you with exceptional support and service. Do not underestimate our promise;

feel free to share your questions and concerns with us.

We are here for you for a lifetime of support,

and will do everything in our capacity to keep you happy.

Welcome to the bObsweep family!

bObsweep WB4727546CH, WB4727546RO User manual