Getac MX50(52628730XXXX) User manual

Type
User manual

The Getac MX50(52628730XXXX) is a rugged mobile computing solution designed for use in demanding environments. With its powerful processor, long battery life, and bright touchscreen display, the MX50 is ideal for field workers, first responders, and other professionals who need a reliable and durable device. The MX50 also features a variety of built-in sensors, including a GPS receiver, accelerometer, and gyroscope, making it ideal for use in navigation and mapping applications.

The Getac MX50(52628730XXXX) is a rugged mobile computing solution designed for use in demanding environments. With its powerful processor, long battery life, and bright touchscreen display, the MX50 is ideal for field workers, first responders, and other professionals who need a reliable and durable device. The MX50 also features a variety of built-in sensors, including a GPS receiver, accelerometer, and gyroscope, making it ideal for use in navigation and mapping applications.

Rugged Mobile Computing Solution
MX50
USER MANUAL
June 2017
Trademarks
Google and Android are trademarks of Google Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
All other brand and product names are trademarks or registered trademarks
of their respective companies.
Disclaimer
Specifications and manuals are subject to change without notice. Getac
assumes no liability for damage incurred directly or indirectly from errors,
omissions, or discrepancies between the device and the manuals.
Notes
Depending on the specific model purchased, the color and look of your
device and accessories may not exactly match the graphics shown in this
document.
The screenshots and other presentations shown in this document are for
reference only. They may differ from the actual screens and presentations
generated by the actual product.
Your device is based on Google’s Android 5.1.1 operating system, with
additions by Getac.
For the latest version of the manual, please visit the Getac website
at
www.getac.com..
i
Table of Contents
Chapter 1 Getting Started ................................................................. 1
Identifying Hardware Components
.......................................... 1
Front Components
................................................................. 1
Back Components
.................................................................. 2
Top Components
.................................................................... 3
Right-Side Components
......................................................... 4
Getting Your Device Ready for Use
.......................................... 5
Connecting to AC Power and Charging the Battery
........... 5
Performing the Initial Startup
.............................................. 7
Using the Tactical Vest Mount (Optional)
................................ 8
Chapter 2
Basic Skills ....................................................................... 10
Sleeping and Shutting Down
.................................................. 10
Navigating on the Screen
........................................................ 10
Touch Mode
......................................................................... 11
Home Screen
............................................................................ 12
Extensions to the Home Screen
.......................................... 12
Customizing Your Home Screen
......................................... 12
Using Applications
................................................................... 13
Navigation Bar
......................................................................... 14
Status Bar and Notifications Panel
......................................... 14
Quick Settings
.......................................................................... 14
Entering Information
............................................................... 15
Chapter 3
Getting Connected ......................................................... 16
Wireless Connections
............................................................... 16
Using Wi-Fi Networks
.......................................................... 16
Using the Bluetooth Function
............................................. 17
External Connections
............................................................... 18
Using a MicroSD Card
.......................................................... 18
Connecting an Audio Device
.............................................. 19
ii
Connecting to a Computer via USB .................................... 20
Chapter 4
Android Preinstalled Applications ................................ 21
Google Applications Overview
................................................ 21
Camera
...................................................................................... 23
Taking Pictures
..................................................................... 23
Shooting Videos
................................................................... 24
Chapter 5
Getac Applications ......................................................... 25
File Manager
............................................................................ 25
Button Descriptions
............................................................. 25
Opening a File
...................................................................... 26
GPS-ECompass
.......................................................................... 27
Satellite Position
.................................................................. 27
Electronic Compass
.............................................................. 28
Location Information
.......................................................... 29
Settings
................................................................................. 29
GPS Logging
......................................................................... 30
Chapter 6
Managing Your Device .................................................. 31
Managing Power
...................................................................... 31
Low Battery Signals and Actions
........................................ 31
Power-Saving Tips
................................................................ 32
Settings
..................................................................................... 32
Wireless and Networks Settings
......................................... 33
Device Settings
..................................................................... 33
Personal Settings
................................................................. 34
System Settings
.................................................................... 35
Chapter 7
Care and Maintenance ................................................... 36
Resetting Your Device
............................................................. 36
Caring for Your Device
............................................................ 36
Chapter 8
Regulatory Information ................................................. 38
Regulations Statements
........................................................... 38
USA Class B Regulations
...................................................... 38
European Union CE Marking and Compliance Notices
..... 39
Safety Precautions
.................................................................... 41
About Charging
................................................................... 41
About the AC Adapter
........................................................ 41
1
Chapter 1
Getting Started
This chapter introduces you to the external components of your device and
guides you through the process of setting up your device for use.
Identifying Hardware Components
Front Components
Ref Component Description
Power
connector
Connects to an external power source.
CAUTION: Never carry the device simply by grasping
the cable. The pulling can damage the wires inside
the cable.
Touch screen
Displays the output of your device and responds to
your touching.
2
Ref Component Description
Camera lens Takes still pictures or records video clips.
OK button Confirms your selection or input.
Arrow buttons
Moves up, down, left and right within the screen or
menu.
Back button Goes back to the previous screen.
Home button Opens the Home screen.
Recent button
Opens a screen containing thumbnails of applications
you’ve used recently. Touch a thumbnail to open that
application.
Fn quick
button
Opens the Camera application (default setting).
Can be assigned to a different function through
Settings.
Back Components
Ref Component Description
Camera lens Takes still pictures or records video clips.
Expansion
connector
(Pogo pin)
Connects to a proprietary snapback module.
3
Top Components
Ref Component Description
P1 quick button Disables/enables the touch screen (default setting).
When disabled, you will see a frame around the
screen and a message at the bottom of the screen.
Can be assigned to a different function through
Settings.
Minus button
Decreases the brightness level (default setting).
Can be assigned to a different function through
Settings.
Plus button
Increases the brightness level (default setting).
Can be assigned to a different function through
Settings.
Power button Starts up the device.
Turns off or restores the screen.
When pressed longer:
Opens a menu with Power off option.
Reset switch
Restarts your device when pressed for more than 5
seconds.
P2 quick button
Captures the current screen and saves it as an image
file (default setting).
Can be assigned to a different function through
Settings.
4
Right-Side Components
Ref Component Description
MicroSD card slot
(inside the cover)
Accepts a microSD card for removable storage.
Micro USB host
connector (inside
the cover)
Connects to a computer via USB cable for data
transfer.
Accepts 5 Volts from a USB power source for
power charging.
Combo Audio
Connector
(inside
the cover)
Connects a set of headphones.
Supports a headset microphone with 4-pole TRRS
3.5mm jack.
CAUTION: To ensure sealing capability, always have the cover closed and
screw (if existing) tightened unless you need to open the cover for accessing
the connector inside.
5
Getting Your Device Ready for Use
Connecting to AC Power and Charging the
Battery
NOTE: This device is shipped to you in a battery power saving mode that
protects the battery from charging/discharging. The battery will get out of
the mode to be ready for use once you connect external power source for
the very first time. (If you have the charging dock, you can also use it as the
external power source.)
1. If you have the AC adapter:
Connect the AC adapter to the power connector of MX50 (
). Connect
one end of the power cord to the AC adapter (
) and the other end to
an electrical outlet (
).
NOTE: AC adapter and power plug types vary with countries.
If you have the USB power adapter charger:
Connect the micro USB end of the cable to MX50 and the USB end to the
adapter. Connect the adapter to an electrical outlet.
6
2. Power is being supplied from the external power source to MX50.
When external power is connected, it also charges the internal battery.
For information on using battery power, see “Managing Powerin
Chapter 6.
CAUTION: For optimal performance of the lithium battery, take note of the
following:
Use the included AC adapter only.
There is no need to fully discharge the battery before charging. You can
charge the battery before it is discharged.
Do not charge the battery where the temperature is high (e.g. in direct
sunlight).
As a battery protection, store the device where the temperature is
appropriate. Avoid high temperatures.
The battery can be charged when its temperature is between 0°C (32°F)
and 40°C (104°F).
If you will not use the product for a long period of time, be sure to fully
charge the battery at least once every two weeks. Over discharge of the
battery can affect the charging performance.
Open the cover to 180 degrees
so as not to interfere with the
cable connection.
7
Performing the Initial Startup
NOTE: You must use external power source when starting up the device for
the very first time.
When turning on your device for the very first time, you will be guided
through a setup process.
1. Make sure that your device is either connected to AC power or the
battery has power.
2. Press the power button.
The device powers up and displays the initial screen.
3. Follow the on-screen instructions to complete the initial setup process.
After the setup is completed, the Home screen appears. You can now use
your device.
8
Using the Tactical Vest Mount
(Optional)
1. Feed the two lower tabs of the mount through lower webbing.
2. Feed all four top tabs through upper webbing.
3. Insert the retention-cord piece to the webbing above the center of the
mount.
9
4. Align the bottom grooves of MX50 with the counterparts on the mount
and insert MX50 at an angle (
). Then press the holder and MX50
together until the clamp clicks into place (
).
5. When you flip up the mount, pull the cord over the clamp.
NOTE: The hinge of the mount might get loose after long time usage.
Tighten the hex nut if this happens.
M2.5 hex key
DIN 911
10
Chapter 2
Basic Skills
This chapter familiarizes you with the basic operations of your device.
CAUTION: The device can get uncomfortably warm when you use it in high
temperatures. In such a circumstance, please take safety measures (such as
wearing gloves) to protect yourself. Prolonged body contact can cause
discomfort and potentially a burn.
Sleeping and Shutting Down
You can manually put your device to sleep by briefly pressing the power
button. To wake up, press the power button.
To shut down, press and hold the power button until a menu pops up. Touch
Power off and then OK.
Navigating on the Screen
CAUTION: Do not use sharp objects on the touch screen. Doing so may
damage the display surface.
Use your finger to navigate and select objects on the screen.
Here are some common terms that you should know when using the touch
screen:
Touch
Touch the screen once with your finger to open an item or select an object.
Touch and hold
Touch and hold your finger on an item to see a list of actions available
for that item.
11
Drag
Hold your finger on an item and, without lifting the finger, move across
the screen until you reach the target position.
Swipe or slide
Move your finger across the screen, without pausing when you first
touch it (so you don’t “draginstead). For example, you slide the screen
up or down to scroll a list.
Pinch
In some applications (such as Maps and Photos), you can zoom in and out
by placing two fingers on the screen at once and pinching them together
(to zoom out) or spreading them apart (to zoom in).
NOTE: When the touch screen does not seem to respond, put the device to
sleep and then wake it. The screen should function again.
Touch Mode
You can change the touch mode to suit your scenario. To quickly switch the
mode, touch one of the widgets on the Home screen.
Select this if you are wearing
thick gloves (referring to
warm gloves or work gloves,
not referring to touch screen
capable gloves).
This mode works best with
fingertip. In this mode, the
touch screen will not pick up
the light touches of liquids,
such as raindrops, as input.
12
Home Screen
The Home screen is your starting point to access all the features on your
device. You can have it display application icons, widgets, shortcuts, and
other features that you want. The default Home screen already contains
some application icons and widgets. At the right side of every Home screen is
the Favorites tray.
To return to the Home screen at any time, touch
at the right side of the
screen or the Home button on the device.
Extensions to the Home Screen
You can slide left or right across the Home screen to see other parts of the
Home screen. Extensions to the Home screen provide more space for
widgets, shortcuts, and other items.
Customizing Your Home Screen
You can add application icons, shortcuts, widgets, and other items to any
part of the Home screen where there’s free space.
Adding an Item to the Home Screen
1. Touch on the Home screen.
2. Touch APPS or WIDGETS depending on the type of item you want to
add.
13
3. Touch and hold an item to add. Drag it to the where you want to place it
and then release it.
Removing an Item from the Home Screen
Touch and hold the item you want to remove. Drag it to the X icon at the
corner of the screen.
Using Applications
Touch (in the Favorites tray) on the Home screen to open the All Apps
screen. The screen holds icons for all of the applications on your device.
Touch an icon to open the application.
Most applications include a Menu icon near the top or lower right corner
of the screen. The menu contains tools that apply to the activities of the
current screen or application.
14
Navigation Bar
The navigation bar at the right side of the screen provides buttons for
navigation purposes and frequently-used tasks.
Button Name Description
Recent
Opens a screen containing thumbnails of applications
you’ve used recently. Touch a thumbnail to open that
application.
Home Opens the Home screen.
Back Goes back to the previous screen.
Status Bar and Notifications Panel
The Status bar appears at the top of almost every screen. It displays icons
indicating that you’ve received notifications (on the left) and icons
indicating the current status (on the right), along with the current time.
You can open the Notifications panel by swiping down from the top.
Quick Settings
Use Quick Settings to quickly change common settings such as screen
brightness, Wi-Fi, Bluetooth, Airplane mode, and others.
You can open Quick Settings from anywhere on your device. Swipe down
from the top to open the Notifications panel and swipe down again to open
the Quick Settings panel.
Status icons
Notifications icons
15
Entering Information
You enter text, numbers, and symbols using the onscreen keyboard. Some
applications open the keyboard automatically. In others, you touch an input
field where you want to enter text to open the keyboard.
To enter text, touch the keys on the keyboard to type. To enter numbers or
symbols, touch the Symbols key to switch to the numbers and symbols
keyboard.
16
Chapter 3
Getting Connected
This chapter tells you how you can get your device connected through a
variety of ways.
Wireless Connections
Using Wi-Fi Networks
Turning On/Off the Wi-Fi Radio
Go to Quick Settings and touch the Wi-Fi icon.
- Or –
Go to Settings. Find the Wi-Fi item under WIRELESS & NETWORKS. Slide the
Wi-Fi switch on or off.
When the Wi-Fi radio is turned on, the icon appears in the status bar. If
your device finds a network that you connected to previously, it connects to it.
Connecting to a Wi-Fi Network
1. Make sure the Wi-Fi radio is on (as described in the previous section).
2. Go to Quick Settings and touch the down arrow of the Wi-Fi item.
- Or -
Go to Settings. Touch Wi-Fi.
3. Your device scans for available Wi-Fi networks and displays the names in
the screen.
4. On the list of discovered networks, touch the one you want to connect to.
5. If the network is secured, you’re prompted to enter a password or other
credentials.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45

Getac MX50(52628730XXXX) User manual

Type
User manual

The Getac MX50(52628730XXXX) is a rugged mobile computing solution designed for use in demanding environments. With its powerful processor, long battery life, and bright touchscreen display, the MX50 is ideal for field workers, first responders, and other professionals who need a reliable and durable device. The MX50 also features a variety of built-in sensors, including a GPS receiver, accelerometer, and gyroscope, making it ideal for use in navigation and mapping applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages