ICP I-87017 User manual

ICP
Brand
ICP
Model
I-87017
Type
User manual

This manual is also suitable for

ICP I-87017R:

The ICP I-87017R is an analog input module with eight channels and a variety of input options. It can accept voltage or current inputs, and the voltage input range can be set to ±10 VDC, ±5 VDC, ±1 VDC, ±500 mV, or ±150 mV. The current input range can be set to 0 ~ +20 mA, +4 ~ +20 mA, or -20 mA ~ +20 mA.

The I-87017R has a high degree of accuracy, with a resolution of 16 bits. The normal mode accuracy is ±0.1% of full-scale range (FSR), and the fast mode accuracy is ±0.5% of FSR. The sampling rate can be set to either normal mode (10 Hz total) or fast mode (50 Hz total).

ICP I-87017R:

The ICP I-87017R is an analog input module with eight channels and a variety of input options. It can accept voltage or current inputs, and the voltage input range can be set to ±10 VDC, ±5 VDC, ±1 VDC, ±500 mV, or ±150 mV. The current input range can be set to 0 ~ +20 mA, +4 ~ +20 mA, or -20 mA ~ +20 mA.

The I-87017R has a high degree of accuracy, with a resolution of 16 bits. The normal mode accuracy is ±0.1% of full-scale range (FSR), and the fast mode accuracy is ±0.5% of FSR. The sampling rate can be set to either normal mode (10 Hz total) or fast mode (50 Hz total).

RS-485 Remote I/O Modules
2
2
11
1
1
I-87KW Series
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Analog Input
I-87017W/I-87017RW
The I-87017RW is an analog input module with an extremely high-quality
protection mechanism where the overvoltage protection can be as high
as 240 V
rms
. The input type can be set to either voltage or current. The
I-87017RW is an upgraded version of I-87017W, with the only differences
being that the I-87017RW is more suitable for critically harsh environment.
The sampling rate for the I-87017RW is can be adjusted to either fast mode
or normal mode depending on individual requirements. The I-87017RW also
provides 4 kV ESD protection as well as 3000 V
DC
intra-module isolation.
Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment
Features
8-channel Analog Input
Voltage or Current Input
240 V
rms
Overvoltage Protection
Adjustable Sampling Rate
4 kV ESD Protection
3000 V
DC
Intra-module Isolation
RoHS Compliant
Wide Operating Temperature Range: -25 to +75°C
I-87017RW I-87017W
8-channel Analog Input Module
Model I-87017W I-87017RW
Analog Input
Channels 8
Wiring Differential
Range
±10 V
DC
, ±5 V
DC
, ±1 V
DC
±500 mV, ±150 mV
0 ~ +20 mA, +4 ~ +20 mA, -20 mA ~ +20 mA
(Requires Optional External 125 Resistor)
Resolution 16-bit
Accuracy
Normal Mode ±0.1% of FSR
Fast Mode ±0.5% of FSR
Sampling
Rate
Normal Mode 10 Hz (Total)
Fast Mode 50 Hz (Total)
-3dB
Bandwidth
Normal Mode 15.7 Hz
Fast Mode 78.7 Hz
Zero Drift ±20 V/°C
Span Drift ±25 ppm/°C
Common Mode Rejection 86 dB
Normal Mode Rejection 100 dB
Input Impedance 20 M >2 M
Overvoltage Protection -35 V
DC
~ +35 V
DC
240 V
rms
Model I-87017W I-87017RW
Communication
Interface RS-485
Format N, 8, 1
Baud Rate 1200 to 115200 bps
Protocol DCON
Dual Watchdog
Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator 1 LED as Power/Communication Indicator
I/O LED Indicator 16 LEDs as High/Low Alarm Signals
Isolation
Intra-module Isolation,
Field-to-Logic
3000 V
DC
EMS Protection
ESD (IEC 61000-4-2)
±4 kV Contact for each Terminal
±8 kV Air for Random Point
Power
Power Consumption 1.3 W Max.
Mechanical
Dimensions (W x L x H) 30 mm x 102 mm x 115 mm
Environment
Operating Temperature -25 to +75°C
Storage Temperature -40 to +85°C
Humidity 10 to 95% RH, Non-condensing
Introduction
Applications
System Specifi cations
I/O Specifi cations
RS-485 Remote I/O Modules
Remote I/O Modules
2
2
12
I-87KW Series
1
1
Website: http://www.icpdas.com E-mail: [email protected]
I-87017W/I-87017RW
I-87017W-G CR 8-channel Analog Input Module (Gray Cover) (RoHS)
I-87017RW-G CR
8-channel Analog Input Module with High
Overvoltage Protection (Gray Cover) (RoHS)
+5 V
TxD
LED Module
Embedded
Controller
EEPROM
ADC
MUX
RxD
INIT
GND
+V
-V
Photo-isolation
Vin0+
Vin0-
Vin1+
Vin1-
Vin6+
Vin6-
Vin7+
Vin7-
Voltage
Protection
Block
H/A
L/A
0
12
3
4
5
67
-87017RW
8 CH A/I
1
16
Top ViewLeft Side View Front View
102
101.2
4.1
4.3
30
115
68.3
71.3
36.3
Terminal
No.
Pin
Assignment
01 Vin0+
02 Vin0-
03 Vin1+
04 Vin1-
05 Vin2+
06 Vin2-
07 Vin3+
08 Vin3-
09 Vin4+
10 Vin4-
11 Vin5+
12 Vin5-
13 Vin6+
14 Vin6-
15 Vin7+
16 Vin7-
Voltage Input Wire Connection
Current Input Wire Connection
Note: When connecting to a current source, an optional external 125
resistor is required.
Volta
e Input Wirin
C
urrent Input Wirin
g
mV/V
V
+
-
mA
+
-
Vin+
Vin-
 ƻ
Vin+
Vin-
PWR
-87017W
1
16
DN-843I-CT-50 CR 3-channel 50 A Current Transformer (RoHS)
125, 0.1% DIP
Resistors
Resistor used for Current Type I-87017/
I-87018 Series Modules
SG-770 CR
7-channel Differential or 14-channel
Single-ended Surge Protector (RoHS)
SG-3000 series
Signal Conditioning Modules for
Thermocouple, RTD, DC Voltage, DC
Current and Power Input
DN-843V-600V CR 3-channel 600 V Voltage Attenuator (RoHS)
DN-848VI-80V CR 8-channel 80 V Voltage Attenuator (RoHS)
DN-848VI-150V CR 8-channel 150 V Voltage Attenuator (RoHS)
DN-843I-CT-1 CR 3-channel 1 A Current Transformer (RoHS)
Ordering Information
Accessories
Dimensions (Units: mm)
Internal I/O Structure
Pin Assignments
Wire Connections
  • Page 1 1
  • Page 2 2

ICP I-87017 User manual

ICP
Brand
ICP
Model
I-87017
Type
User manual
This manual is also suitable for

ICP I-87017R:

The ICP I-87017R is an analog input module with eight channels and a variety of input options. It can accept voltage or current inputs, and the voltage input range can be set to ±10 VDC, ±5 VDC, ±1 VDC, ±500 mV, or ±150 mV. The current input range can be set to 0 ~ +20 mA, +4 ~ +20 mA, or -20 mA ~ +20 mA.

The I-87017R has a high degree of accuracy, with a resolution of 16 bits. The normal mode accuracy is ±0.1% of full-scale range (FSR), and the fast mode accuracy is ±0.5% of FSR. The sampling rate can be set to either normal mode (10 Hz total) or fast mode (50 Hz total).

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents