Pro-Line PRO606300 User guide

Type
User guide
TO
TRAXXAS® to Pro-Line Shock Interchange Guide
NOTE 1 NOTE 1NOTE 2
E-MAXX
®
E-MAXX
®
BRUSHLESS
T-MAXX
®
3.3
T-MAXX
®
CLASSIC
TRAXXAS
®
STOCK SHOCKS:
FRONT & REAR
3762A
T-MAXX
®
SLASH
®
STAMPEDE
®
RUSTLER
®
RALLY
®
TELLURIDE
®
BANDIT
®
SLASH
®
/ Nitro SLASH
®
SLASH
®
Robby Gordon Dakar
SLASH
®
- Ford Raptor SVT
SLASH
®
VXL
SLASH
®
4X4
SLASH
®
4X4 Platinum
SLASH
®
4X4 Ultimate
TRAXXAS
®
STOCK SHOCKS:
FRONT - 3760A
REAR - 3762A
STAMPEDE
®
(2WD)
Nitro STAMPEDE
®
(2WD)
STAMPEDE
®
4x4 Brushed
STAMPEDE
®
4x4 VXL
STAMPEDE
®
VXL (2WD)
STAMPEDE
®
VXL (2WD)
TRAXXAS
®
STOCK SHOCKS:
FRONT - 3760A
REAR - 3762A
RUSTLER
®
/ Nitro RUSTLER
®
RUSTLER
®
VXL
Nitro Sport
TRAXXAS
®
STOCK SHOCKS:
FRONT - 3760A
REAR - 3762A
RALLY
®
TRAXXAS
®
STOCK SHOCKS:
FRONT - 3760A
REAR - 3762A
TELLURIDE
®
TRAXXAS
®
STOCK SHOCKS:
FRONT - 3760A
REAR - 3762A
BANDIT
®
BANDIT
®
VXL
BANDIT
®
VXL
TRAXXAS
®
STOCK SHOCKS:
FRONT - 3760A
REAR - 3762A
**Some vehicles may require stiffer springs from the Optional Spring Assortments when using heavier batteries.
T-MAXX
®
, E-MAXX
®
, SLASH
®
, STAMPEDE
®
, RUSTLER
®
, RALLY
®
, TELLURIDE
®
, BANDIT
®
are registered trademarks of TRAXXAS
®
L.P.
HIGH PERFORMANCE SHOCKS
FRONT
6308-30
REAR
6308-31
NOTE 2 (T-MAXX
®
/E-MAXX
®
):
Use thinner / narrower pivot balls on the lower shock eye application
or T-MAXX
®
an E-MAXX
®
Trucks
NOTE 1 (RUSTLER
®
/BANDIT
®
):
3mm to 4mm Internal Limiter Spacers recommended in
Pro-Spec Front Shocks to help reduce push when cornering
Optional Parts
Pro-Spec Springs:
#6308-11 (Super Soft) [F] / #6308-16 (Super Soft) [R]
#6308-12 (Soft) [F] / #6308-17 (Soft) [R]
#6308-13 (Medium) [F] / #6308-18 (Medium) [R]
#6308-14 (Hard) [F] / #6308-19 (Hard) [R]
#6308-15 (Super Hard) [F] / #6308-20 (Super Hard) [R]
*Additional parts are available
Pre-Assembled
6308-30
&
6063-00
REPLACES TRAXXAS
®
3760A
6308-31
&
6063-01
REPLACES TRAXXAS
®
3762A
HIGH PERFORMANCE SHOCKS
HIGH PERFORMANCE SHOCKS
FRONT
6063-00
REAR
6063-01
NOTE 2 (T-MAXX
®
/E-MAXX
®
):
Must replace lower rod end pivot balls in PowerStroke Shocks
with pivot balls from the Stock OEM TRAXXAS
®
Shocks
NOTE 1 (RUSTLER
®
/BANDIT
®
):
3mm to 4mm Internal Limiter Spacers recommended in
PowerStroke Front Shocks to help reduce push when cornering
PowerStroke Front Shock Spring Assortment
PowerStroke Rear Shock Spring Assortment
PowerStroke SC Universal Shock Mounting Hardware Kit
(Does Not work on SLASH
®
4x4 or TELLURIDE
®
4X4)
#6063-03
#6063-04
#6063-05
Optional Parts
Both Great Pro-Line Shocks Fit These TRAXXAS
®
Kits
Shop On-Line at:
*Additional parts are available
Pre-Assembled
  • Page 1 1

Pro-Line PRO606300 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI