Dwyer BDG-01 User manual

Dwyer
Brand
Dwyer
Model
BDG-01
Type
User manual

This manual is also suitable for

Dwyer Model BDG-01 is a brass digital pressure gauge designed for measuring gas pressure with ±0.5% of full-scale accuracy. Its user-selectable units of measure allow for various pressure scales, making it versatile for different applications. With its easy installation process and IP10 enclosure rating, it can be mounted in various locations without excessive vibration. The backlit LCD display provides clear readings, and the ON/U/OFF and RESET buttons enable simple operation, including unit change, zero reset, and power management.

Dwyer Model BDG-01 is a brass digital pressure gauge designed for measuring gas pressure with ±0.5% of full-scale accuracy. Its user-selectable units of measure allow for various pressure scales, making it versatile for different applications. With its easy installation process and IP10 enclosure rating, it can be mounted in various locations without excessive vibration. The backlit LCD display provides clear readings, and the ON/U/OFF and RESET buttons enable simple operation, including unit change, zero reset, and power management.

Model BDG Brass Digital Pressure Gage
Specifications - Installation and Operating Instructions
Bulletin P-BDG
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
SPECIFICATIONS
S
ervice: Compatible gases.
W
etted Materials: Brass and silicone sensor.
H
ousing Materials: ABS plastic.
Accuracy: ±0.5% FS.
Long Term Stability: ±0.05% FS per year.
Pressure Limits: 2X pressure range; Burst pressure: 3X pressure range.
Enclosure Rating: IP10.
T
emperature Limits: 14 to 140°F (- 10 to 60°C).
T
hermal Effect: ±0.04% FS per °C.
S
ize: 2.5˝ O.D.
Process Connection: 1/4˝ male NPT.
Display: 4-digit LCD (1-1/4 x 5/8˝).
Power Requirements: 3 V CR123A lithium metal battery, installed functional,
user replaceable.
Battery Life: 2 to 3 years typ.
Weight: 0.29 lb (0.13 kg).
T
he Model BDG-01 Brass Digital Pressure Gage measures gas pressure with
±0.5% of full-scale accuracy at an affordable price. With brass wetted material, the
Model BDG is designed for your specific applications of compatible gasses. Its
design allows for easy installation. User-selectable units of measure let one gage
be used for various pressure scales.
L
ocation
S
elect a location where the gage can be easily read and the temperature will not
exceed 140°F (60°C). The mounting surface to the gage should be free from
excessive vibration.
Installation
When installing the gage, always use 7/8˝ hex wrench at the base of the housing
to tighten the gage to a mating fitting. Be sure to use proper thread sealant when
installing. Do not apply wrench to housing.
Key Functions
- ON/U/OFF (LB) – On/Off/Unit Change
- RESET (RB) – Reset Zero/Backlight
Operation
To turn on the gage, press . This button also allows you to scroll through the
units, which are located on the right side of the display. To reset zero, press and
hold for 2 seconds until display re-zeros. Press and hold for 2
seconds to turn off the gage.
Calibration
To ensure accurate pressure readings, be sure to zero gage before first use. This
eliminates readings to any change in atmospheric pressure. Only zero gage while
it is disconnected from any fitting. It is also recommended to re-zero the gage once
a year.
Battery Removal
If the battery is low, the display will show “Lob” and turn off after 3 seconds. To
replace the battery, unscrew the plastic cover on the top of the gage housing. Then
remove the battery and replace with a new one. Make sure the (+) and (-) polarities
are correct.
Ø
2-43/64
[
Ø67.87]
3-39/64
[91.49]
1
5/32
[
11.91]
1-3/8
[34.75]
7
/8
[
22.15]
©Copyright 2014 Dwyer Instruments, Inc. Printed in U.S.A. 7/14 FR# R9-444059-00 Rev.2
ON/U
OFF
RESET
ON/U
OFF
RESET
ON/U
OFF
MAINTENANCE/REPAIR
Upon final installation of the Model BDG no routine maintenance is required. The
Model BDG is not field serviceable and should be returned if repair is needed. Field
repair should not be attempted and may void warranty.
WARRANTY/RETURN
Refer to “Terms and Conditions of Sales” in our catalog and on our website.
Contact customer service to receive a Return Goods Authorization number before
shipping the product back for repair. Be sure to include a brief description of the
problem plus any additional application notes.
  • Page 1 1

Dwyer BDG-01 User manual

Dwyer
Brand
Dwyer
Model
BDG-01
Type
User manual
This manual is also suitable for

Dwyer Model BDG-01 is a brass digital pressure gauge designed for measuring gas pressure with ±0.5% of full-scale accuracy. Its user-selectable units of measure allow for various pressure scales, making it versatile for different applications. With its easy installation process and IP10 enclosure rating, it can be mounted in various locations without excessive vibration. The backlit LCD display provides clear readings, and the ON/U/OFF and RESET buttons enable simple operation, including unit change, zero reset, and power management.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents