Usage:
1. Fill the body with water:
1. When using for the first time, please unscrew the safety lid, insert
the funnel and pour two measuring cups of water into the body (do
not try to over fill).
2. When the water needs to be refilled, switch the machine off, and
press the buttons to discharge the steam completely. Unscrew the
safety lid slowly and refill according to the above.
ATTENTION: the steam buttons must be pressed until the safety lid
is opened. Take care as the body and parts of the cleaner may be hot
to touch.
2. Install the spare parts: choose the suitable parts according to your need
(please refer to “How to install and use the spare parts” on page 5).
3. Connect with the power supply and check that the red indicator is on.
4. Allow approximately four minutes before use. Indicator will turn green
when unit is ready to emit steam. Do not press the steam buttons
continuously as this will reduce the steam pressure. Press for a few
seconds and release. Pressure will return to normal after approximately
10 seconds.
1. Measuring Cup
2. Funnel
3. Floor Attachment
4. Rubber Blade
5. Brush Blade
6. Bent Nozzle
7. Cloth Cover
8. Round Brush
9. Straight Nozzle
10. Shoulder Strap
Clips
11. Safety Cap
12. Hose
13. Steam Buttons
14. Main Body
15. Power Indicator
16. Power Cable
17. Shoulder Strap
Warning when using attachments:
Always ensure that the steam switch is turned off and there is no steam being
emitted from the steam outlet before changing attachments. Always ensure
that the tools are cool prior to removing or use oven gloves or a towel to
handle them as they will be hot.
How to install and use the spare parts:
1. Straight Nozzle: Align the nozzle with the steam dispenser and slide over
the attachment button ensuring it clicks into place. This piece can be used
to deliver steam directly onto an area.
2. Round Brush or Bent Nozzle: These attachments can be applied to either
the straight nozzle or hose. They can be used for cleaning small areas such
as corners and window edges. The brush is ideal for more stubborn marks
or greases.
3. Floor Attachment (can be used with either the rubber blade, brush blade
or cloth cover): The floor attachment is applied directly onto the hexagonal
end of the hose attachment. There is a long slot in the floor attachment in
which the rubber blade or brush blade can be inserted. These combinations
or the cloth cover can be used for cleaning large areas such as glass,
flooring, furniture and upholstery.
4. Hose: Attach the hose to the unit in the same way as the straight nozzle.
Ideal for cleaning ovens or difficult areas where access may be restricted.
12
10
13
10
11
16
5
3
7
1
15
2
8
9
17
6
14
4