2. Real Fyre
  3. Split-Oak Designer Plus

Real Fyre Split-Oak Designer Plus, Split-Oak Designer Plus Log Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Real Fyre Split-Oak Designer Plus Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
LOG SET IMPORTANT INFORMATION
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
Important: Adequate ventilation is absolutely
necessary. Adequate spacing
between the logs is NECESSARY
and MUST be maintained. Some
carbon build up (sooting) may occur
where fl ames strike the logs. If carbon
build up (sooting) continues, rearrange
top logs to allow more opening(s) for
fl ame(s) before sooting becomes worse.
If any sooting occurs outside of the
fi rebox (i.e. on the walls), turn off unit
immediately and contact a qualifi ed
professional service technician.
This product is only warranted when used as part
of a Robert H. Peterson Co. vented burner system.
WARNING: Use ONLY Real Fyre burners and valves
with this Real Fyre gas log set. Failure to
do so may result in property damage or
personal injury, and will void listings,
certifi cations, and invalidate claims
made to RHP. Contact your local Real
Fyre dealer if you need more information.
This instruction contains recommended log placement for your Real Fyre log set. This instruction contains
recommended log placement for these Real Fyre logs which will promote good combustion and provide
superior fl ame pattern and appearance, when the logs are used with a Peterson burner system.
Adequate ventilation is absolutely necessary! Provided signifi cant, noticeable sooting does not occur,
some fl exibility is possible in log placement to suit your individual preference (see Important below). If you
experience a continued accumulation of black carbon (soot) on your logs it is an indication of incomplete
combustion and you should move the effected log(s) so as to minimize the fl ame contact on the effected
log(s). Please read these instructions completely and carefully.
2
CAUTION: Burn hazard! Logs will remain hot for some time after
use. If you need to reposition any log to maintain the proper
layout, use heat resistant gloves or allow logs adequate time
to cool before handling.
Failure to use Peterson burners and valves may result in a DANGEROUS
situation and in property damage, personal injury or even death; will
void listings and certifi cations; and will void any insurance coverage
by R.H. Peterson Co or our insurers.
WARNING: This gas log set is for use with R.H. Peterson Co
burners (and parts) ONLY.
L-A2-326REV 3 - 1603310715
3
L-A2-326
Split-Oak Designer Plus (SDP-2) Log Set Placement Instructions (18" & 20" models)
E
V
3
- 1
6033
1
0
71
5
1
2
3
4
SDP-2-18 and SDP-2-20
PARTS LIST
1
2
3
SDPL-12T
4
SDPL-10T
5
6
5
6
SDPL-13TR
SDPL-11TL
18" - SDPL-18BF
20" - SDPL-20BF
Final Log Placement
18" log set shown
18" - SDPL-18BF
20" - SDPL-20BF
Opposite View of Log Placement
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
IV
I
II
III
All items for this log set are included in one (1) box.
L-A2-326
REV 3 - 1603310715
4
Split-Oak Designer Plus (SDP-2) Log Set Placement Instructions (24" model)
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
1
2
3
4
SDP-2-24
PARTS LIST
1
2
3
SDPL-13T
4
SDPL-10T
5
6
5
6
SDPL-12T
SDPL-15T
SDPL-24BF
Final Log Placement
7
7
SDPL-11T
SDPL-24BF
Opposite View of Log Placement
IV
I
II
III
All items for this log set are included in one (1) box.
L-A2-326REV 3 - 1603310715
5
Split-Oak Designer Plus (SDP-2) Log Set Placement Instructions (30" model)
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
1
2
3
4
SDP-2-30
PARTS LIST
1
2
3
SDPL-12T
4
SDPL-10T
5
6
5
6
SDPL-14T
SDPL-15T
SDPL-30BF
Final Log Placement
7
7
SDPL-13T
SDPL-30BF
Opposite View of Log Placement
IV
I
II
III
All items for this log set are included in one (1) box.
L-A2-326
REV 3 - 1603310715
6
Split-Oak Designer Plus (SDP-2) Log Set Placement Instructions (36" model)
V3
-
1603310715
66
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
1
2
3
4
SDP-2-36
PARTS LIST
1
2
3
SDPL-15T
4
SDPL-16T
5
6
5
6
SDPL-10T
SDPL-17T
SDL-36BF
L
-A2-3
2
Final Log Placement
7
8
9
7
SDPL-13T
9
SDPL-14T
8
SDPL-12T
SDL-36BF
Opposite View of Log Placement
IV
I
II
III
3 Boxes Items
SDP-36BF SDL-36BF
SDP-36BF SDL-36BF
SDP-2-36T
SDPL-10T, SDPL-12T, SDPL-13T,
SDPL-14T, SDPL-15T, SDPL-16T
/