Pipe Decor 365 PDCRR392082 Operating instructions

Pipe Decor
Brand
Pipe Decor
Model
365 PDCRR392082
Type
Operating instructions
ID: 27840
# PII365CRR392082
— 201048
ROLLING CLOTHING RACK - 2 TIER
NEED HELP OR ADVICE PUTTING THIS KIT TOGETHER? MISSING PIECES?
EMAIL US AT [email protected] FOR ANY QUESTIONS
# 365CRR392082
HOW TO PREVENT PIPE CORROSION
PIPE DECOR industrial-grade black pipes and fittings are coated with a rust-preventive oil during manufacturing. For best results,
SEAL THE PIPES TO AVOID ANY RUSTING after cleaning the kit.
CLEAN AND SEAL INSTRUCTIONS:
CLEAN: Recommended supplies: regular degreasing dish soap, washcloths, gloves (optional)
1. Wash your pipes and fittings with warm water and dish soap until the oil is completely removed.
2. Wipe the pipes with a dry washcloth and wait until the pipes are completely dry.
IMPORTANT: THE PIPES MUST BE COMPLETELY DRY BEFORE YOU START THE SEALING PROCESS.
SEAL: if using polyurethane spray: Spray each dry pipe and fitting with a polyurethane matte or satin finishing spray and let it dry
before assembling the kit.
if using finishing wax: Coat each dry pipe with a finishing wax. Wait for 20 minutes, then polish the pipe with a dry washcloth by wiping
them down. Faster wiping will result in a shinier finish.
PART DESCRIPTION QTY
A 36” PIPE 8
B 8” NIPPLE 4
C 4” NIPPLE 2
D 1/2” TEE 6
E 1/2” CAP 2
F 1/2” SIDE OUTLET ELBOW 4
G 1-1/2” NIPPLE 4
H CASTER WITH BRAKE 4
I 1/2” TAPPED CAP 4
A
A
A
B
B
C
D
E
F
G
H
I
RECOMMENDED TOOLS FOR INSTALLATION
A
A
D
# 365CRR392082
ROLLING CLOTHING RACK - 2 TIER
PIPE DECOR industrial-grade black pipes and fittings are coated with a rust-preventive oil during manufacturing. For best results,
SEAL THE PIPES TO AVOID ANY RUSTING after cleaning the kit.
CLEAN AND SEAL INSTRUCTIONS:
CLEAN: Recommended supplies: regular degreasing dish soap, washcloths, gloves (optional)
1. Wash your pipes and fittings with warm water and dish soap until the oil is completely removed.
2. Wipe the pipes with a dry washcloth and wait until the pipes are completely dry.
IMPORTANT: THE PIPES MUST BE COMPLETELY DRY BEFORE YOU START THE SEALING PROCESS.
SEAL: if using polyurethane spray: Spray each dry pipe and fitting with a polyurethane matte or satin finishing spray and let it dry
before assembling the kit.
if using finishing wax: Coat each dry pipe with a finishing wax. Wait for 20 minutes, then polish the pipe with a dry washcloth by wiping
them down. Faster wiping will result in a shinier finish.
ID: 27840
# PII365CRR392082
— 201048
STEP 1
Start with the top pipe (36”)
D
C
A
E
D
A
STEP 2
STEP 3
Hand tighten A into D as hard as you can.
Then unscrew the A (in ) into the the opposite D (in ).
It will be loose, but the connection is good.
1
21 2
A
D
1
2
Tighten here first
D
STEP 4
A
A
F
F
STEP 5
STEP 6
A
F
F
B
B
D
1
1
2
2
Tighten here first
Tighten here first
A
A
F
F
F
F
Hand tighten A pipe into F
as hard as you can.
Then unscrew the A pipe (in )
into the the opposite F (in ). It
will be loose, but the connection
is good.
1
21
2
H
G
I
  • Page 1 1
  • Page 2 2

Pipe Decor 365 PDCRR392082 Operating instructions

Pipe Decor
Brand
Pipe Decor
Model
365 PDCRR392082
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents