2. Omron
  3. BP 05 Blood Pressure Meter
BP 05 Blood Pressure Meter

Omron BP 05 Blood Pressure Meter User guide

  • Hello! I've reviewed the Quick Paring Guide for the RCP Blood Pressure Meter BP 05. This document provides instructions on how to pair the blood pressure meter with a SmartHub using its Bluetooth feature. I am ready to answer your questions to help you understand how to properly pair your device.
  • What do I need to check before pairing the device?
    How do I start the pairing process?
    What should I do if the SmartHub doesn't announce that my device is paired?
BP 05
Blood Pressure Meter
Quick Paring Guide
1. Make sure you are within 25 feet of your SmartHub and that the
SmartHub is plugged in and showing a Green Light.
2. Press and hold the Bluetooth paring button until you see “P”
displayed on the screen of the PB05.
3. Once you see the “P”, release the button.
4. After a few moments, the SmartHub will announce “Thank You. Device
Paired.”
If the Smart Hub does not announce that your device is paired, unplug the
SmartHub, wait 15 seconds, and then plug it back in.
Wait for the SmartHub to Announce, it is ready to send data to your provider.
Repeat the 4 steps above.
If the SmartHub still does not say “Thank You. Device Paired” contact RCP
Customer Support at 855-477-7000.
/