2. OLIMEX
  3. AgonLight2-Proto

OLIMEX AgonLight2-Proto User manual

  • Hello! I've read the user manual for the AgonLight2-Proto prototype board. It seems like a handy tool for quickly testing your ideas on the AgonLight2 platform. This board includes a GPIO connector, power LEDs, a sea-of-pads area for your components, and designated power buses. I'm ready to help if you have questions about this device or its features.
  • What is the size of the AgonLight2-Proto board?
    What type of connector is used for connecting to the AgonLight2 GPIO?
    What do the LEDs indicate on the board?
AgonLight2-Proto
User Manual
Rev.1.0 June 2023 olimex.com
1
Table of Contents
What is AgonLight2-Proto.........................................................................................................................3
Order codes for AgonLight2-Proto:......................................................................................................4
HARDWARE.............................................................................................................................................5
AgonLight2-Proto layout:.....................................................................................................................6
Revision History........................................................................................................................................7
2
What is AgonLight2-Proto
AgonLight2-Proto is small board with dimensions 100x80mm. It allows you to fast prototype concept
and ideas for AgonLight2 computer.
AgonLight2-Proto has these features:
•IDC connector 34 pin for connection on AgonLight2 GPIO
•3mm RED LED for 5V power indication
•3mm GREEN LED for 3.3V power indication
•Sea-of-Pads
•GND and 3.3V bus connecting vertically all pads on the left edge
•GND and 5V bus connecting vertically all pads on the right edge
•Dimensions 100x80mm
•3 hex distance spacers for keeping board horizontally when ICD connector is plug to
AgonLight2 GPIO
3
Order codes for AgonLight2-Proto:
AgonLight2-Proto prototype board with components not soldered
4
HARDWARE
Assembled view:
5
AgonLight2-Proto layout:
6
GPIO connector can be soldered
horizontally or side-way
All GPIO signals are
available close to the
prototype area
Power LEDs
Power busses
Revision History
Revision 1.0 June 2023
7
/