Digital Watchdog DWC-VFWMW Wall Mount Quick start guide

Hello! I've reviewed the Quick Start Guide for the Digital Watchdog wall mount brackets, models DWC-VAWM, DWC-VFWMW, and DWC-VFZWM. This guide provides instructions on installing these brackets for vandal dome, ball, and fisheye cameras including details on screw sizes and mounting procedures. Feel free to ask any questions you have about the installation process or the compatible camera models.
What type of cameras are compatible with this mount?

What is included in the box?

How do I mount the camera to the bracket?

Wall mount bracket for vandal dome, vandal ball and

vandal ﬁsheye cameras

Quick Start Guide

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday

digital-watchdog.com

NOTE: Download all your support materials and tools in one place.

1. Go to: http://www.digital-watchdog.com/resources

2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results

for applicable part numbers will populate automatically based on the part number you enter.

3. Click ‘Search’. All supported materials, including manuals

and quick start guide (QSGs) will appear in the results.

WHAT’S IN THE BOX

Camera Mounting Screws 4Mounting Pad 1

Screws and Plastic Anchors 4Mounting Template 1

Quick Setup Guide 1

M3.0X8.0M3.0X12.0M3.0X20.0M3.0X23.0

DWC-VAWM DWC-VFWMW DWC-VFZWM

Quick Start Guide

Rev Date: 08/21

Speciﬁcations and pricing are subject to change without notice.

INSTALLATION

Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.

Secure the mounting bracket to the mounting surface using the screws and anchors that were included with the mount. Use

the mounting pad between the bracket’s arm and mounting surface as needed.

To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included

with the camera.

NOTE: Do not touch the lens when handling the camera.

Pass wires through and make all necessary connections.

Secure the camera to the mounting bracket using the included screws. See the table below for the length of the screws and

compatible cameras.

Camera mounting screw Screw size Compatible camera

M3.0x23.0 V(P)8 vandal dome cameras

M3.0x20.0 V6 vandal dome cameras and V(P)A

vandal ball cameras

M3.0x12.0 M(P)F and V(P)C vandal dome

cameras, P(P)VF vandal ﬁsheye

cameras.

M3.0x8.0 V(P)7 vandal dome cameras.

Adjust the camera’s lens position and

angle and place the cover dome on the

camera base to complete the installation. Wall mount

Camera module

Camera dome cover