ClonerAlliance HDML-Cloner Box Pro User manual

HDML-Cloner Box Pro User Manual

Source Snapshot Rec/Stop

®

HDML Cloner box

HDML-Cloner Box Pro User Manual

This documentation describes how to use HDML-Cloner Box Pro (Model: CA-998P) device.

Copyright Notice

Documentation Version 2.5

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any

language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise, without the prior written permission of ClonerAlliance™ Inc.

Trademarks

HDML® is a registered trademark of ClonerAlliance® Inc.

Safety Notices

Before using HDML-Cloner Box Pro, please ensure that you read and understand

the safety precautions below:

1. Do not attempt to open the case of HDML-Cloner Box Pro or modify it in any way,

as this will void the warranty.

2. Keep HDML-Cloner Box Pro away from water and other liquids, as this may cause

the unit to malfunction.

3. HDML-Cloner Box Pro may become warm during use. This does not indicate

malfunction.

4. Do not place heavy objects on HDML-Cloner Box Pro, as this may cause the unit

to overheat and malfunction.

5. If the exterior of HDML-Cloner Box Pro requires cleaning, wipe it with a soft dry

cloth.

6. Do not dispose of the unit via conventional domestic waste.

CONTENTS

1Getting Started 1

1.1 Box Contents ...............................................................................1

1.2 Product Diagram.............................................................................2

2How to record videos to the USB storage device? 6

2.1 Connect ....................................................................................6

2.2 Record/Capture ..............................................................................7

2.3 Playback ...................................................................................8

2.4 How to Playback the Recorded files on HDML-Cloner Box Pro directly? ................................8

2.5 Schedule Recording ..........................................................................14

2.6 Menu Navigation ............................................................................16

3How to record videos to PC? 22

3.1 Obtain HDML-Cloner Pro Helper ...............................................................22

3.2 Install & Connect ............................................................................23

3.3 Register ....................................................................................28

3.4 Record/Capture ..............................................................................31

3.5 Setup ......................................................................................37

4Frequently Asked Questions 42

5Supported Resolutions 45

6Product Specifications 46

7Contact Us 47

8Disclaimer 48

i

GETTING STARTED

1.1 Box Contents

®

HDML Cloner box

Source Rec/StopSnapshot

• a. Power Adapter

• b. MMI Cable (VGA/AV/YPbPr to HDMI Cable)

• c. Micro-USB to USB Cable

• d. HDML-Cloner Box Pro

• e. Remote Control

• f. User Manual

• g. HDMI Cable

1

1.2. Product Diagram

1.2 Product Diagram

Source Rec/Stop

Snapshot

1. LED indicator light for recording. Blue means HDML-Cloner Box Pro is recording videos in 1080p, while Green means

it is recording videos in 720p or others.

2. When this light is on, it means HDML-Cloner Box Pro is turned on.

3. Source: Press this button to switch the input signal. HDMI, VGA, YPbPr and AV are available.

4. Snapshot: Press this button to take a snapshot.

5. Rec/Stop: Press this button to start/stop recording.

2

1. Getting Started

Line InLine Out MicStorage

6 7 8 9

6. Line In: Stereo audio inputs.

7. Line Out: Insert the headphone plug into this jack to output the video sound.

8. Mic: Insert the microphone plug into this jack to input voice.

9. Storage: Insert the USB flash drive or mobile hard disk and record videos to this storage medium.

3

1.2. Product Diagram

5V/2A In MMI In Out To PC

10 11 12 13 14

10. 5V/2A: Plug the power adapter into this port and power on HDML-Cloner Box Pro.

11. In: Connect an HDMI cable between the video player and HDML-Cloner Box Pro.

12. MMI In: Connect the included VGA/AV/YPbPr to HDMI cable between the video player and HDML-Cloner Box Pro.

13. Out: Connect an HDMI cable between HDML-Cloner Box Pro and TV.

14. To PC: Connect the Micro-USB to USB cable between PC and HDML-Cloner Box Pro for recording videos to PC. This

function must be realized together with HDML-Cloner Pro Helper.

4

1. Getting Started

HDML Cloner box

Power on/Power off.

Capture an image.

Select HDMI as the input signal.

Select VGA as the input signal.

Select YPbPr as the input signal.

Select AV as the input signal.

Mute.

Switch to the aspect ratio of 4:3.

Switch to the aspect ratio of 16:9.

Microphone mute.

Start recording.

Stop recording.

OK button.

Adjust the volume of the source video.

Adjust the volume of MIC input.

Show the main menu.

Back to the previous interface.

Set the system time by year/month/day/hour/minute/second.

Play back the contents in the USB storage device.

Set the recording frequency. Starting time and recording time. Then videos will be

recorded automatically according to your settings.

Back to the previous page.

Play(full screen) or stop playing.

Go to the next page.

Fast backward.

Delete the recorded Video.

Fast forward.

Set the output resolution to 720p.

Set the output resolution to 1080p.

Select the recording resolution for PC, including 1920x1080, 1280x720 and 720x480.

Tips: The remote control is powered by 2 AAA batteries which are not included and need to be purchased independently.

5

HOW TO RECORD VIDEOS TO THE USB STORAGE DEVICE?

2.1 Connect

1. Plug the power adapter into the power socket and plug the other end into the 5V/2A port of HDML-Cloner Box Pro.

2. Connect the video player to In port on HDML-Cloner Box Pro via an HDMI cable.

3. Connect HDML-Cloner Box Pro from Out port to TV via an HDMI cable.

4. Plug the USB storage device into the “Storage”port of HDML-Cloner Box Pro.

6

2. How to record videos to the USB storage device?

Tips:

1. If you want to connect devices via the VGA/AV/YPbPr to HDMI cable, please connect the video player to MMI In

port on HDML-Cloner Box Pro.

2. Please use a premium USB flash drive or mobile hard disk with high speed to avoid unexpected problems such as file

loss.

2.2 Record/Capture

1. After all devices are connected properly, please connect power adapter of HDML-Cloner Box Pro and turn on other

devices.

2. Plug in a USB flash drive.

3. Insert a video disc into the drive of the video player and play the video

4. Press the Rec/Stop button on the capture box or press the REC button on the remote control to Start recording

5. After recording for a period of time, press the Rec/Stop button again on the capture box or press the STOP button on

the remote control to stop recording.

Note: DO NOT remove the USB storage drive from HDML-Cloner Box Pro in the process of recording (Flashing Blue/Green

LED indicates it’s still in the process of recording.)

7

2.3. Playback

2.3 Playback

1. Playback on HDML-Cloner Box Pro: Please follow the step by step instructions below.

2. Or you can attach the USB storage drive to your PC/player to playback the recorded videos.

2.4 How to Playback the Recorded files on HDML-Cloner Box

Pro directly?

1. After all devices are connected properly, plug the USB storage device into HDML-Cloner Box Pro and press the

PLAYBACK button on the remote control to enter the playback menu interface.

8

2. How to record videos to the USB storage device?

There are four categories, which are FILM, PHOTO, MUSIC and TEXT.

9

2.4. How to Playback the Recorded files on HDML-Cloner Box Pro directly?

2. Select one category and press OK to go to the next step. Then you can select a partition.

10

2. How to record videos to the USB storage device?

3. You will see the file list.

11

2.4. How to Playback the Recorded files on HDML-Cloner Box Pro directly?

Select your desired file by using the four buttons of volume control on the remote control. You can preview the files and

press OK to select multiple files.

12

2. How to record videos to the USB storage device?

4. Press on the remote control to play the selected video(full screen).

13

2.5. Schedule Recording

2.5 Schedule Recording

1. Press the TIME button on the remote control. Set the system time by using the four buttons of volume control on the

remote control. Then select Save to finish the setting.

14

2. How to record videos to the USB storage device?

2. Press the SCHEDULE button on the remote control. Set the recording frequency, start time and recording time by

using the four buttons of volume control on the remote control. Then select Save to finish the setting.

3. After finishing the setup, press on the remote control and return to the video playback interface. Then HDML-Cloner

Box Pro will start to record videos automatically at the scheduled time. Note: If you want to record certain channel’s

video, do select the channel first.

15

2.6. Menu Navigation

2.6 Menu Navigation

Press on the remote control to browse the menu settings of HDML-Cloner Box Pro, which are TIME, PICTURE, SOUND

and OPTION.

1. Under the TIME column, there are seven aspects: System Time, Schedule Recording, Headset Mixing, Bitrate Set,

Time info, Rec info and Firmware Update(USB).

16

Page is loading ...

ClonerAlliance HDML-Cloner Box Pro User manual

This manual is also suitable for

ClonerAlliance HDML-Cloner Box Pro User manual

Related papers

Other documents