Digital Screen
#10-24 Nut X6
1. Attach the digital panel to the Mounting Bracket (C) with 6 #10-24
Nuts (G).
1/4-20x1.5”
X6
Flat Washer
#8x.75” Screw X36
#8x.75” Screw X24
1/4-20x.5” Screw X4
Furniture Pad
Bottom Side
E x3
A x1 B x1 C x1
3. Attach (3) Bottom Boards (E) one by one using #8x.75 Screws (J)
as shown below.
NOTE: The bottom side has furniture pads attached.
2. Connect the Left Shelf (A) and the Right Shelf (B) with Middle Rod
(D) in the middle. Secure the Rod and shelves using (3) 1/4-20x1.5”
Screws (H) and (3) Flat Washers on each end.
4. Attach the mounting bracket with digital screen to 1 Top Board (F),
then place it on top of the assembled display unit. Secure the bracket
using (2) 1/4-20x.5” Screws (K) on each side.
D x1 E x3 F x2
G x6 H x6 I x6 J x60 K x4
#10-24 1/4-20x1.5” Flat Washer #8x.75” 1/4-20x.5”
5. Fix the 1st top board in the center with (12) #8x.75 Screws (J). `
Fix the other top board with the remaining #8x.75 Screws (J).
Connect the power cord with the digital screen and plug the adapter
into the power outlet.
INSTALLATION INSTRUCTIONS
SMCMCGRSD - Classic Modern Collection Digital Fixture
If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer service 844-221-3388.
NOTE:
Cord management bars
are provided for this
unit. These bars can be
attached at any location
on the unit, using the
adhesive backing. Cord
can be slotted in to keep
neat.
/
