ADS Technologies HDUP-1500 Operating Instructions Manual

Brand: ADS Technologies

Model: HDUP-1500

Category: Supplementary music equipment

Type: Operating Instructions Manual

ADS Technologies HDUP-1500 upconverts standard definition video signals from any source to HDTV resolutions of 480p, 720p, or 1080i. It features advanced frame rate conversion and image enhancement, including 3D noise reduction, adaptive 4-line comb filter, and full color controls. The built-in audio/video switcher supports up to 9 video devices and cable TV.

ADS Tech

North America Support Hours:

M-F : 8 am - 5 pm, PST

Email : [email protected]

website : www.adstech.com

HDTV UpConverter

Convert your standard denition video signals to HDTV

Operating Instructions: SECOND EDITION

Model No: HDUP-1500

HDTV UpConverter 2 HDTV UpConverter 3

English

First Thing’s FirstTable of Contents: ENGLISH

First Thing’s First: 3

SAFETY PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

FCC NOTICE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . 5

Introduction: 6

PRODUCT FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PRODUCT SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

FRONT PANEL & DISPLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

REAR PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

CONNECTING THE UPCONVERTER TO YOUR TV. . . . . . . . . . . . . . . . 13

CONNECTING THE UPCONVERTER THROUGH A RECEIVER. . . . . . 14

REMOTE CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

REMOTE COMBINATION CODES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Functions: 18

USING UPCONVERTER FOR FIRST TIME. . . . . . . . . . . . . . . . . . . . . . 18

TV TUNING FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

PICTURE IN PICTURE FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . .20

CHANGING ASPECT RATION WITH VIEW MODE. . . . . . . . . . . . . . . . .21

ON-SCREEN MENU FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Appendix: 29

FAQ’s: 31

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL

HDTV UpConverter 2 HDTV UpConverter 3

English

First Thing’s First

SAFETY PRECAUTIONS:

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE

THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING

OR SPLASHING, AND OBJECTS FILLED WITH LIQUIDS,

SUCH AS VASES, SHALL NOT BE PLACED ON THE

APPARATUS.

The lightning ash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufcient magnitude to constitute a risk to persons.

The exclamation point, within an equilateral triangle, is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

: P r ecautio ns :

HDTV UpConverter 4

HDTV UpConverter 5

English

First Thing’s First

English

First Thing’s First

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

j PLEASE READ AND FOLLOW ALL WARNINGS AND

INSTRUCTIONS IN THIS OWNERS MANUAL AND THOSE

MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR

FUTURE REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use

can result in electric shock or re hazard. The safeguards incorporated in this unit will

protect you if you observe the following procedures for installation, use and servicing.

This unit is fully transistorized and does not contain any parts that can be repaired by

the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE, REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

CAUTION

: F C C :

HDTV UpConverter 4

HDTV UpConverter 5

English

First Thing’s First

English

First Thing’s First

IMPORTANT SAFETY INSTRUCTIONS:

1.) Read these instructions.

2.) Keep these instructions.

3.) Heed ALL warnings.

4.) Follow all instructions.

5.) Do not use this apparatus near water.

6.) Clean only with dry cloth.

7.) Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8.) Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including ampliers) that produce heat.

9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not t into

your outlet, consult an electrician for replacement of the obsolete outlet.

10.) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11.) Only use attachments/accessories specied by the manufacturer.

12.) Use only with the cart, stand, tripod, bracket,

or table specied by the manufacturer, or sold

with the apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13.) Unplug this apparatus during lightning storms or when unused for long

periods of time.

14.) Refer all servicing to qualied service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

: S a fet y :

HDTV UpConverter 6

HDTV UpConverter 7

English

Introduction

English

Introduction

The A-D-S Tech HDTV UpConverter provides superior resolution conversion of

standard denition TV and video signals (480i or 480p) into HDTV resolutions of 480p,

720p or 1080i to provide you with Cinema-quality video for an exhilarating home theatre

experience with your HDTV. The HDTV UpConverter uses advanced video

processing technology which has the ability to analyze incoming video signals and

format and convert the video to always present the best video quality possible.

Product Features:

HDTV UpConversion of Video from Any Source

The A-D-S Tech HDTV UpConverter uses an advanced video processor to do more

than line doubling or quadrupling and actually up scales standard denition video

sources to HDTV resolutions displaying up to 6 times more pixels than the original

video content without introducing new artifacts.

Advanced Frame Rate Conversion

Video content that was originally shot on lm at 24 progressive frames per second

such as Movies, Cartoons and many TV shows have been converted to 30 frames per

second interlaced video for TV viewing. The HDTV UpConverter utilizes 2:2/3:2 inverse

pull-down to restore the movie back to progressive scan images.

Image Enhancement

The HDTV UpConverter provides superior image enhancement with features found in

professional level products such as:

Picture Enhancement

- 3D Noise Reduction

- Vertical and Horizontal Sharpening

- Adaptive 4 line comb lter

- 9 bit A to D conversion 2X over sampled

- 10 bit digital to analog Progressive or

Interlaced output

Full Color Controls

- Contrast, Brightness, Hue and Saturation

Color Space Conversion

- Standard Denition to High Denition

: P r odu c t F e atu res :

HDTV UpConverter 6

HDTV UpConverter 7

English

Introduction

English

Introduction

CinemaView™ Video Scan Conversion

- Pixel based motion adaptive de-interlacing provides the best image quality from

interlaced video sources processing pixel by pixel and also diagonally.

- Inverse 2:2/3:2 lm processing provides “cinema-like” progressive scan images from

film originated content like DVD movies and many TV shows.

- Film mode detectors and ltering ensure smooth, artifact-free de-interlacing as the

characteristics of video content changes.

Integrated Audio/Video Switching

The HDTV UpConverter is also an Audio/Video Switcher. Connect up to nine (9) video

devices, plus connect your Cable TV to built-in tuner and UpConvert TV to HDTV

resolutions. Use the remote or front panel controls to switch from one video source to

the next.

Advanced Format Conversion

The HDTV UpConverter supports a variety of picture formats and aspect ratios to

provide the optimum display resolution and format.

- Anamorphic

- Panoramic

- Letterbox

- Pan-Scan and Crop (480i, 480p)

- Pillar Box

- Expand

Picture in Picture Modes

The HDTV UpConverter supports various PiP and multi-PiP windows and

re-synchronization of display timing with no temporal artifacts.

TV Auto Scan – In the TV Channel Setup menu you can select SCAN to auto scan

available TV channels.

1.) Select TV Channel Setup Menu

2.) Select AUTO-Tune and choose SCAN

3.) Close on-screen menu by pressing Menu button twice

4.) Press the TV button on the remote to begin channel scanning.

: P r odu c t F e atu res :

HDTV UpConverter 8

HDTV UpConverter 9

English

Introduction

English

Introduction

: P r odu c t F e atu res :

Video Input Auto-Detect – The UpConverter can detect which inputs you have video

signals connected. You can scan through the video inputs and then when you use the

Input button on the remote you will skip to only those inputs.

Have video playing on all of your connected devices when choosing Video

input auto-detect.

1.) Select Video Input Menu

2.) Select Auto-detect and choose SCAN

3.) Close on-screen menu by pressing Menu button twice

4.) Press the INPUT button on the remote to begin scanning video inputs

Video Input Menu – We have added Red, Blue and Green settings for both Black Level

and Picture (contrast) for the Component video inputs. This sets the levels of the incoming

component video signal before any video processing occurs. This will give you greater

control of color and image quality from the component input source. The brightness, color,

saturation, etc. controls on Main and PiP menus are for output settings from the video

processor.

Additional Output Resolutions – we have published that the HDTV UpConverter will

support 480i, 480p, 720p and 1080i, however we have added the following resolutions to

accommodate the native resolutions of several xed pixel display devices such as Plasma

and LCD at panels and video projectors:

Additional supported resolutions are: 852 x 480p, 1024 x 768p, 1280 x 768p, 1336 x 768p

and 1920 X 540p.

Your display device will likely not support all of these resolutions. If you select a resolution

that your device does not support, you may get a black screen or you may see video

garbled on the screen. If this happens, Press the menu button 2 times and then press the

480p button on the remote and your video image should re-appear.

Down Conversion – We have published the features of this product as an HDTV

UpConverter but in fact the unit can Down Convert as well as UpConvert video signals.

This means that if you are receiving a 1080i HD signal from your HDTV tuner or receiver,

you can down convert to 720p or to a native resolution (see above) that matches the xed

pixel resolution of your display device.

HDTV UpConverter 8

HDTV UpConverter 9

English

Introduction

English

Introduction

: P r odu c t F e atu res :

High Denition Input – We have published the capability to accepting standard

denition input and upconverting the video signal to HDTV resolutions. We are happy

to advise that the HDTV UpConverter can accept HDTV signals from terrestrial set

top box tuners, HD satellite receivers and HDTV Digital Cable boxes through any of

the three (3) Component video inputs. The UpConverter can receive signals at 480p,

720p or 1080i.

1080i pass-through – the HDTV UpConverter can receive a 1080i input signal, however

when the output resolution is also set to 1080i the image will be pillar boxed (black

bars on left and right side) so you may want to display a 1080i input signal at the 720p

resolution or any other lower resolution. An input signal of 1080i will also appear in

Pillar Box mode if 1920 x 540p resolution is selected.

Product Specications:

Specications:

Front Panel:

• Power On/Standby

• Display showing input, display resolution, TV channel

• TV Tuning buttons

• Source and resolution select buttons

Inputs:

• 3 - RCA Video jacks

• 3 - S-VHS jacks

• 3 - Component video jacks (480i/480p, 1080i)

• 1 - 125 channel cable ready tuner

• 9 - R+L RCA Audio jacks

Outputs:

• 1 – HDTV Component jack

• 1 – R + L RCA jack

Video Input:

• Std. Denition 480 interlaced or progressive scan 480p, and HD sources of 720p and 1080i

Video Output:

• HDTV 480p, 720p or 1080i resolutions as well as additional output resolutions for xed pixel

display devices of 852 x 480p, 1024 x 1024p, 1280 x 768p, 1280 x 1024p

Power:

• Internal Switching Power Supply

• Input: 110-240 VAC

Requirements:

• HDTV Ready TV, Plasma, LCD or projector with HD Component Video Inputs (YPbPr)

• Analog Video source w/RCA, S-VHS or Component Video output or analog TV signal

HDTV UpConverter 10

HDTV UpConverter 11

English

Introduction

English

Introduction

FRONT PANEL & DISPLAY:

Front Panel

1.) Power Button 5.) Film Mode/De-Interlace Mode Indicator

2.) Standby LED 6.) VFD Display Window

3.) Source Select Button 7.) Channel Up/Down Buttons

4.) Video Resolution Button

Power Button – Toggles between Standby and Power On modes. All settings are saved

when device is in Standby mode. When device comes out of Standby mode the device will

return to the previous input source and resolution. Input/output settings will be momentarily

displayed on the TV or video device.

Standby LED - A red LED indicator will be lit when the device is in Standby mode.

Source Select Button – Press button to cycle through the video input sources. Press the

button periodically to cycle through all 10 video input sources.

Video Resolution Button – Press to cycle through the standard video output resolutions

(480i, 480p, 720p and 1080i)

Film Mode/De-Interlace Mode Indicator – The HDTV UpConverter has the capability to

use several different de-interlacing techniques depending upon the characteristics of the

video being processed. The front panel of the UpConverter will display the Film mode

process being used at any one time. These are displayed as: AFM, SM, VT, GFX and will be

explained later in this user guide.

: P r odu c t F e atu res :

HDTV UpConverter 10

HDTV UpConverter 11

English

Introduction

English

Introduction

VFD Display Window – The Vacuum Fluorescent Display provides information about the

current status of the HDTV UpConverter.

Channel Up/Down Buttons – Use these buttons when TV is the current video source to

change TV channels.

VFD Display

1.) TV Channel – displays the current channel you are viewing

2.) Current Output Resolution – indicates the current video resolution that is being

sent to your display device (480i, 480p, 720p, 1080i, etc.)

3.) Video Source – displays source descriptions (Comp YPbPr, S-Video, RCA Video or

TV Tuner) and either the source number (1-9) or the TV channel (1-125).

: P r odu c t F e atu res :

HDTV UpConverter 12

HDTV UpConverter 13

English

Introduction

English

Introduction

REAR PANEL:

Rear Panel

1.) High Denition Component Video Outputs (YPbPr/YCbCr)

2.) Set of 3 High Denition Component (YPbPr) video inputs (480i – 1080i)

3.) Set of 3 S-Video (Y/C) inputs

4.) Set of 3 RCA video (Composite) input Jacks

5.) Analog Cable Ready 125 channel Tuner

6.) Right and Left Stereo audio inputs – matched to switch with corresponding video inputs.

7.) Right and Left Stereo audio outputs

8.) AC Power Receptacle

: P r odu c t F e atu res :

HDTV UpConverter 12

HDTV UpConverter 13

English

Introduction

English

Introduction

: C o nne c tio ns :

CONNECTING THE UPCONVERTER TO YOUR TV OR PLASMA:

HDTV UpConverter 14

HDTV UpConverter 15

English

Introduction

English

Introduction

CONNECTING THE UPCONVERTER THROUGH AN A/V RECEIVER:

: C o nne c tio ns :

HDTV UpConverter 14

HDTV UpConverter 15

English

Introduction

English

Introduction

REMOTE CONTROL:

Inserting Batteries into the Remote Control

Insert four (4) size AAA batteries (supplied) by matching

the + and the – on the batteries to the diagram inside the

battery compartment.

• Remove the batteries to avoid damage from

possible battery leakage whenever you anticipate

that the remote control will not be used for an

extended period.

• Handle the remote control with care. Avoid dropping

it, getting it wet, or placing it in direct sunlight, near a

heater, or wherever the humidity is high.

Remote Control

1.) Power Button

2.) Menu Button

3.) LED

4.) Screen Resolution Buttons (480i, 480p, 720p, 1080i)

5.) Left, Right, Up, Down Buttons

6.) TV Button

7.) Input Button

8.) Enter Button

9.) 0 - 9 Keys

10.) Favorites Button

11.) Jump

12.) PIP

13.) PIP Mode

14.) View Mode

15.) CC

16.) Mute

17.) Film

: R e mot e :

HDTV UpConverter 16

HDTV UpConverter 17

English

Introduction

English

Introduction

Power Button - On/Standby

Menu - Displays on TV screen menu options

LED - Indicates remote activity

480i - Changes UpConverter output resolution to 480i

480p - Changes UpConverter output resolution to 480p

720p - Changes UpConverter output resolution to 720p

1080i - Changes UpConverter output resolution to 1080i

Left, Right, Up, Down - Use for menu selections and TV Up/Down channel changing when in

TV mode.

TV - Switches main video input source to TV – press a second time to return to previous video

source.

Input - Toggle from one input source to another or use in combination with video source num-

ber to directly select a new video source ( Example: Input + 3 – switches to Input source 3)

Enter - Pressing enter at any time will display the current input and output sources and reso-

lutions. You also use Enter to make On Screen Menu selections.

0 – 9 keys - Directly select TV channels in TV mode and use in combination with Input button

to directly select video source.

Favorites - Toggles between 5 favorite TV channels (you set 5 favorite stations in the TV

Channel Setup menu)

Jump - Jump back to previously tuned TV channel

PIP - Opens Picture in Picture Window

PIP Mode - Toggles between several PIP window modes

View Mode - Toggles between Video Format modes; Letterbox, Panoramic, Expand and Pan

& Scan (480i and 480p only)

CC - Toggles Closed Captioning on and off

Mute - Mutes audio output

Film - Toggles between various de-interlacing methods (Auto, VT, AFM, SM and GFX)

HDTV UpConverter 16

HDTV UpConverter 17

English

Introduction

English

Introduction

Remote Button Combination Codes:

Some functions are available by using remote control buttons in combination.

Here is a summary of those functions:

The Zero (0) button is generally used as the leading button for most button combinations.

Select Input Source Input + Source #

Delete TV Channel from Channel list 0 + TV Channel (0 + 3 deletes Ch. 3)

Add TV Channel to Channel list Enter channel number (14 adds Ch. 14)

Toggle Main and Pip Sources 0 + PiP Mode

Toggle Audio between Main and PiP 0 + Jump

Pause/Freeze PiP Window 0 + PiP

Change PiP Input Source Input + Enter + Source #

Select Tiled Active PiP Window as Main 0 + View Mode

HDTV UpConverter 18

HDTV UpConverter 19

English

Functions

English

Functions

Using your HDTV UpConverter for the rst time

1.) Connect your video sources (VCR, DVD player, Laser Disk player, Cable TV, etc.) as

shown previously in the conguration drawings.

2.) Use the HDTV Component video cable (supplied) between the UpConverter and the

High Denition Component Video inputs on your video display device (HDTV Ready TV,

LCD TV, Plasma screen, projector, etc.).

3.) Connect the AC Power cable to your AC outlet

4.) Turn on your TV or video display device.

5.) Select the HD Component video inputs on your TV or Video device as your video

source. (check owners manual of your display device).

6.) Press the Power Button on the HDTV UpConverter or the PWR button on the remote

control to initialize the device. The rst time the unit is powered up the VFD display

will show the following text: “ADS Tech HDTV UpConverter” and then it will display the

rmware version “Firmware Version 1.00.45”

7.) The UpConverter will then search for a video input with an active video signal.

8.) The VFD Display will show the current video input source and output resolution.

9.) You can use the “Source” button on the front of the UpConverter to toggle through the

video sources to select a different video source, or use the Remote to select a video

source: Press the “Input” button followed by the source number (1 – 10) to jump to a

video source.

10.) You should now see your video source displayed on your TV or video display device.

HDTV UpConverter 18

HDTV UpConverter 19

English

Functions

English

Functions

TV Tuning Functions

The HDTV UpConverter includes a 125 channel cable ready tuner. This is an analog tuner,

not a digital or HDTV tuner. You can receive TV signals from Cable TV sources or from a

conventional TV antenna.

Changing to TV mode – There are 2 ways to select the TV tuner as your active video

source.

1.) Press the “TV” button on the remote control

2.) Press Input followed by 1 and 0 on the remote (Input + 10) – this takes you to video

source number 10.

Changing TV Channels - Once you are TV mode, the 0 – 9 keys on the remote control can

be used for channel selection.

- Selecting channels with the number keys – when directly selecting a TV channel,

simply press in the channel numbers; example Press “7” to go to channel “7”, Press

“10” to go to channel “10” and press “54” to go directly to channel “54”.

**Do not put a “0” in front of the channel number you want to tune.

- Using Front Panel TV Channel buttons – to move up or down the TV Channel list,

press the Channel Up or Down button. The channels will tune up or down one station

for each button press.

- Using Up/Down buttons on the Remote Control – The Up/Down buttons on the

remote control will tune through the TV channel list when you are in the TV mode. The

Remote Up/Down buttons control on screen menu choices when the On screen menu

appears on the screen.

Changing Channels in PiP mode – When you are using Picture in Picture (PiP) features and

TV is playing in the PiP window, you can use any of the tuning methods above to change the

TV channel appearing in the PiP window. More on PiP and PiP modes later in this manual.

Jump Button – When in TV mode, you can press the “Jump” button at any time to instantly

tune to the pervious TV station you watched. Use the Jump button to bounce back and forth

between two TV stations.

Favorite Button – Use the “Favorite” button to tune through up to 5 of your favorite or most

often watched TV channels. Pressing the Favorite button repeatedly will cycle through the

5 favorite TV stations that you will program into the UpConverter in the TV Channel Setup

menu explained below.

HDTV UpConverter 20

HDTV UpConverter 21

English

Functions

English

Functions

Picture in Picture Functions

The HDTV UpConverter supports Picture in Picture capabilities. This allows you to have 2

or more windows on the TV screen at the same time allowing you to, for example, watch a

movie in the main portion of the screen and tune a TV channel in the PiP window. TV Input is

the default source for the PiP Window, but you can change the PiP source.

See Menu Functions and Appendix B – Main/Pip Selection Chart.

PiP Window Examples

PiP Button – Press the PIP button to open a Single PiP window.

Single PiP Window positions– Press the Left or Right buttons to cycle through Single PiP

window locations.

PIP Mode Button – Press the PIP Mode button to cycle through several PiP modes (Single,

Side by Side, Main + 4, Main + 12, 16 tiled windows). *(Main+12 and 16 Tiled can only be

viewed at 1080i resolution)

TV as the PiP Input – When the TV tuner is selected as the PiP input you can have up to 16

PiP TV Channels Auto-Fill into the multiple PiP window modes. Select your 16 PiP window

channels in the TV Channel Setup Menu. When you enter a PiP mode that has multiple PiP

windows, your PiP TV channels will automatically ll into these windows.

Pause PiP Window Fill – To pause the cycling of PiP windows with TV channels. Press the

PiP button.

When in PiP Pause mode you can:

1.) Use the Up/Down buttons to tune to a different channel or you can use the number keys to

tune to any specic TV channel.

2.) Use the Left/Right buttons to move left or right to make that channel the active PiP

window.

Changing the Pip Window to the Main Video Window - If you have selected a PiP Window

and want that to ll your TV screen, Press “0” + “View Mode”

Page is loading ...

ADS Technologies HDUP-1500 Operating Instructions Manual

Brand: ADS Technologies

Model: HDUP-1500

Category: Supplementary music equipment

Type: Operating Instructions Manual

Download PDF

report

ADS Technologies HDUP-1500 Operating Instructions Manual

ADS Technologies HDUP-1500 Operating Instructions Manual

Related papers

Other documents