Pyle PMKS32 User manual

www.pyleaudio.com

User Manual

1. Place the bigger pole onto the hole of the iron base, and have

the screw to tighten it on the base bottom.

2. Screw the gooseneck into the top of the pole.

3. Screw the mic holder into the top of gooseneck.

4. Loosen the brace on the pole and then adjust it to desired

height.

5. Tighten the brace securely afterwards.

Headquarters: 1600 63

Street

Brooklyn, NY 11204 – USA

Toll Free: (800) 444 – 5671

Tel: (718) 236 – 8000 Fax: (718) 236 – 2400

www.pyleaudio.com

PMKS32 - Micro

hone Stand