Pyle PMKS18 User manual

www.pyleaudio.com

User Manual

1. Place the larger stand pole onto the hole of the round base, and

screw to tighten it onto the base bottom.

2. Screw the double-mic holder-device on the top of the pole, then

place and tighten the mic holders.

3. Tighten the brace firmly to allow proper and secure mic holding.

4. Loosen the brace on the pole and adjust it to the desired height.

5. Tighten the brace securely afterwards.

Headquarters: 1600 63

Street

Brooklyn, NY 11204 – USA

Toll Free: (800) 444 – 5671

Tel: (718) 236 – 8000 Fax: (718) 236 – 2400

www.pyleaudio.com

PMKS18 - Micro

hone Stand